@@ -34,7 +34,57 @@ DTC_FLAGS_overlay += -@
DTC_FLAGS_overlay_bad_phandle += -@
DTC_FLAGS_overlay_bad_symbol += -@
DTC_FLAGS_overlay_base += -@
+DTC_FLAGS_static_base_1 += -@
+DTC_FLAGS_static_base_2 += -@
DTC_FLAGS_testcases += -@
# suppress warnings about intentional errors
DTC_FLAGS_testcases += -Wno-interrupts_property
+
+# Apply overlays statically with fdtoverlay. This is a build time test that
+# the overlays can be applied successfully by fdtoverlay. This does not
+# guarantee that the overlays can be applied successfully at run time by
+# unittest, but it provides a bit of build time test coverage for those
+# who do not execute unittest.
+#
+# The overlays are applied on top of static_base_1.dtb and static_base_2.dtb to
+# create static_test_1.dtb and static_test_2.dtb. If fdtoverlay detects an
+# error than the kernel build will fail. static_test_1.dtb and
+# static_test_2.dtb are not consumed by unittest.
+#
+# Some unittest overlays deliberately contain errors that unittest checks for.
+# These overlays will cause fdtoverlay to fail, and are thus not included
+# in the static test:
+# overlay_bad_add_dup_node.dtb \
+# overlay_bad_add_dup_prop.dtb \
+# overlay_bad_phandle.dtb \
+# overlay_bad_symbol.dtb \
+
+apply_static_overlay_1 := overlay_0.dtbo \
+ overlay_1.dtbo \
+ overlay_2.dtbo \
+ overlay_3.dtbo \
+ overlay_4.dtbo \
+ overlay_5.dtbo \
+ overlay_6.dtbo \
+ overlay_7.dtbo \
+ overlay_8.dtbo \
+ overlay_9.dtbo \
+ overlay_10.dtbo \
+ overlay_11.dtbo \
+ overlay_12.dtbo \
+ overlay_13.dtbo \
+ overlay_15.dtbo \
+ overlay_gpio_01.dtbo \
+ overlay_gpio_02a.dtbo \
+ overlay_gpio_02b.dtbo \
+ overlay_gpio_03.dtbo \
+ overlay_gpio_04a.dtbo \
+ overlay_gpio_04b.dtbo
+
+apply_static_overlay_2 := overlay.dtbo
+
+static_test_1-dtbs := static_base_1.dtb $(apply_static_overlay_1)
+static_test_2-dtbs := static_base_2.dtb $(apply_static_overlay_2)
+
+overlay-$(CONFIG_OF_OVERLAY) += static_test_1.dtb static_test_2.dtb
new file mode 100644
@@ -0,0 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "testcases_common.dtsi"
new file mode 100644
@@ -0,0 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "overlay_common.dtsi"
Now that fdtoverlay is part of the kernel build, start using it to test the unitest overlays we have by applying them statically. Create two new base files static_base_1.dts and static_base_2.dts which includes other .dtsi files. Some unittest overlays deliberately contain errors that unittest checks for. These overlays will cause fdtoverlay to fail, and are thus not included for static builds. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> --- drivers/of/unittest-data/Makefile | 50 ++++++++++++++++++++++ drivers/of/unittest-data/static_base_1.dts | 4 ++ drivers/of/unittest-data/static_base_2.dts | 4 ++ 3 files changed, 58 insertions(+) create mode 100644 drivers/of/unittest-data/static_base_1.dts create mode 100644 drivers/of/unittest-data/static_base_2.dts -- 2.25.0.rc1.19.g042ed3e048af