[v7,2/7] arm: dts: qcom: Add SPM device bindings for 8974

Message ID 1411779495-39724-3-git-send-email-lina.iyer@linaro.org
State New
Headers show

Commit Message

Lina Iyer Sept. 27, 2014, 12:58 a.m.
Add SPM device bindings for QCOM 8974 based cpus. SPM is the sub-system
power manager and controls the logic around the cores (cpu and L2).

Each core has an instance of SPM and controls only that core. Each cpu
SPM is configured to support WFI and SPC (standalone-power collapse).

Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
---
 arch/arm/boot/dts/qcom-msm8974.dtsi | 26 +++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)

Comments

Stephen Boyd Sept. 29, 2014, 11:02 p.m. | #1
On 09/26/14 17:58, Lina Iyer wrote:
> @@ -144,7 +148,27 @@
>  			};
>  		};
>  
> -		saw_l2: regulator@f9012000 {
> +		saw0: saw@f9089000 {
> +			compatible = "qcom,msm8974-saw2-v2.1-cpu";
> +			reg = <0xf9089000 0x1000>;

There is another reg property as part of the binding that should be
specified here.

Patch

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 69dca2a..828f5bb 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -21,6 +21,7 @@ 
 			reg = <0>;
 			next-level-cache = <&L2>;
 			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
 		};
 
 		cpu@1 {
@@ -30,6 +31,7 @@ 
 			reg = <1>;
 			next-level-cache = <&L2>;
 			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
 		};
 
 		cpu@2 {
@@ -39,6 +41,7 @@ 
 			reg = <2>;
 			next-level-cache = <&L2>;
 			qcom,acc = <&acc2>;
+			qcom,saw = <&saw2>;
 		};
 
 		cpu@3 {
@@ -48,6 +51,7 @@ 
 			reg = <3>;
 			next-level-cache = <&L2>;
 			qcom,acc = <&acc3>;
+			qcom,saw = <&saw3>;
 		};
 
 		L2: l2-cache {
@@ -144,7 +148,27 @@ 
 			};
 		};
 
-		saw_l2: regulator@f9012000 {
+		saw0: saw@f9089000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu";
+			reg = <0xf9089000 0x1000>;
+		};
+
+		saw1: saw@f9099000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu";
+			reg = <0xf9099000 0x1000>;
+		};
+
+		saw2: saw@f90a9000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu";
+			reg = <0xf90a9000 0x1000>;
+		};
+
+		saw3: saw@f90b9000 {
+			compatible = "qcom,msm8974-saw2-v2.1-cpu";
+			reg = <0xf90b9000 0x1000>;
+		};
+
+		saw_l2: saw@f9012000 {
 			compatible = "qcom,saw2";
 			reg = <0xf9012000 0x1000>;
 			regulator;