diff mbox series

[net-next,2/3] dt-bindings: net: xilinx_axienet: add xlnx,switch-x-sgmii attribute

Message ID 20210213002356.2557207-3-robert.hancock@calian.com
State New
Headers show
Series None | expand

Commit Message

Robert Hancock Feb. 13, 2021, 12:23 a.m. UTC 
Document the new xlnx,switch-x-sgmii attribute which is used to indicate
that the Ethernet core supports dynamic switching between 1000BaseX and
SGMII.

Signed-off-by: Robert Hancock <robert.hancock@calian.com>
---
 Documentation/devicetree/bindings/net/xilinx_axienet.txt | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/xilinx_axienet.txt b/Documentation/devicetree/bindings/net/xilinx_axienet.txt
index 7360617cdedb..2cd452419ed0 100644
--- a/Documentation/devicetree/bindings/net/xilinx_axienet.txt
+++ b/Documentation/devicetree/bindings/net/xilinx_axienet.txt
@@ -38,6 +38,10 @@  Optional properties:
 		  1 to enable partial TX checksum offload,
 		  2 to enable full TX checksum offload
 - xlnx,rxcsum	: Same values as xlnx,txcsum but for RX checksum offload
+- xlnx,switch-x-sgmii : Boolean to indicate the Ethernet core is configured to
+		  support both 1000BaseX and SGMII modes. If set, the phy-mode
+		  should be set to match the mode selected on core reset (i.e.
+		  by the basex_or_sgmii core input line).
 - clocks	: AXI bus clock for the device. Refer to common clock bindings.
 		  Used to calculate MDIO clock divisor. If not specified, it is
 		  auto-detected from the CPU clock (but only on platforms where