diff mbox series

[v6,3/3] ARM: tegra: acer-a500: Add atmel,wakeup-method property

Message ID 20210302102158.10533-4-digetx@gmail.com
State Superseded
Headers show
Series Support wakeup methods of Atmel maXTouch controllers | expand

Commit Message

Dmitry Osipenko March 2, 2021, 10:21 a.m. UTC
Acer A500 uses Atmel Maxtouch 1386 touchscreen controller. This controller
has WAKE line which could be connected to I2C clock lane, dedicated GPIO
or fixed to HIGH level. Controller wakes up from a deep sleep when WAKE
line is asserted low. Acer A500 has WAKE line connected to I2C clock and
Linux device driver doesn't work property without knowing what wakeup
method is used by h/w.

Add atmel,wakeup-method property to the touchscreen node.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
 arch/arm/boot/dts/tegra20-acer-a500-picasso.dts | 3 +++
 1 file changed, 3 insertions(+)

Comments

Dmitry Torokhov March 21, 2021, 10:40 p.m. UTC | #1
On Tue, Mar 02, 2021 at 01:21:58PM +0300, Dmitry Osipenko wrote:
> Acer A500 uses Atmel Maxtouch 1386 touchscreen controller. This controller

> has WAKE line which could be connected to I2C clock lane, dedicated GPIO

> or fixed to HIGH level. Controller wakes up from a deep sleep when WAKE

> line is asserted low. Acer A500 has WAKE line connected to I2C clock and

> Linux device driver doesn't work property without knowing what wakeup

> method is used by h/w.

> 

> Add atmel,wakeup-method property to the touchscreen node.

> 

> Signed-off-by: Dmitry Osipenko <digetx@gmail.com>


Applied, thank you.

-- 
Dmitry
Thierry Reding March 25, 2021, 2:10 p.m. UTC | #2
On Sun, Mar 21, 2021 at 03:40:28PM -0700, Dmitry Torokhov wrote:
> On Tue, Mar 02, 2021 at 01:21:58PM +0300, Dmitry Osipenko wrote:

> > Acer A500 uses Atmel Maxtouch 1386 touchscreen controller. This controller

> > has WAKE line which could be connected to I2C clock lane, dedicated GPIO

> > or fixed to HIGH level. Controller wakes up from a deep sleep when WAKE

> > line is asserted low. Acer A500 has WAKE line connected to I2C clock and

> > Linux device driver doesn't work property without knowing what wakeup

> > method is used by h/w.

> > 

> > Add atmel,wakeup-method property to the touchscreen node.

> > 

> > Signed-off-by: Dmitry Osipenko <digetx@gmail.com>

> 

> Applied, thank you.


I noticed that you had applied this as I was applying a different patch
that touches the same area and it causes a conflict. In general I prefer
to pick up all device tree changes into the Tegra tree, specifically to
avoid such conflicts.

That said, I didn't see an email from Stephen about this causing a
conflict in linux-next, so perhaps it's fine. If this pops up again it
might be worth considering to drop this from your tree so that I can
resolve the conflict in the Tegra tree.

Thierry
Dmitry Torokhov March 25, 2021, 6:15 p.m. UTC | #3
On Thu, Mar 25, 2021 at 03:10:25PM +0100, Thierry Reding wrote:
> On Sun, Mar 21, 2021 at 03:40:28PM -0700, Dmitry Torokhov wrote:
> > On Tue, Mar 02, 2021 at 01:21:58PM +0300, Dmitry Osipenko wrote:
> > > Acer A500 uses Atmel Maxtouch 1386 touchscreen controller. This controller
> > > has WAKE line which could be connected to I2C clock lane, dedicated GPIO
> > > or fixed to HIGH level. Controller wakes up from a deep sleep when WAKE
> > > line is asserted low. Acer A500 has WAKE line connected to I2C clock and
> > > Linux device driver doesn't work property without knowing what wakeup
> > > method is used by h/w.
> > > 
> > > Add atmel,wakeup-method property to the touchscreen node.
> > > 
> > > Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> > 
> > Applied, thank you.
> 
> I noticed that you had applied this as I was applying a different patch
> that touches the same area and it causes a conflict. In general I prefer
> to pick up all device tree changes into the Tegra tree, specifically to
> avoid such conflicts.
> 
> That said, I didn't see an email from Stephen about this causing a
> conflict in linux-next, so perhaps it's fine. If this pops up again it
> might be worth considering to drop this from your tree so that I can
> resolve the conflict in the Tegra tree.

Sorry about that, I went ahead and dropped the patch from my branch.

Thanks.
Thierry Reding March 26, 2021, 12:21 p.m. UTC | #4
On Thu, Mar 25, 2021 at 11:15:54AM -0700, Dmitry Torokhov wrote:
> On Thu, Mar 25, 2021 at 03:10:25PM +0100, Thierry Reding wrote:
> > On Sun, Mar 21, 2021 at 03:40:28PM -0700, Dmitry Torokhov wrote:
> > > On Tue, Mar 02, 2021 at 01:21:58PM +0300, Dmitry Osipenko wrote:
> > > > Acer A500 uses Atmel Maxtouch 1386 touchscreen controller. This controller
> > > > has WAKE line which could be connected to I2C clock lane, dedicated GPIO
> > > > or fixed to HIGH level. Controller wakes up from a deep sleep when WAKE
> > > > line is asserted low. Acer A500 has WAKE line connected to I2C clock and
> > > > Linux device driver doesn't work property without knowing what wakeup
> > > > method is used by h/w.
> > > > 
> > > > Add atmel,wakeup-method property to the touchscreen node.
> > > > 
> > > > Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
> > > 
> > > Applied, thank you.
> > 
> > I noticed that you had applied this as I was applying a different patch
> > that touches the same area and it causes a conflict. In general I prefer
> > to pick up all device tree changes into the Tegra tree, specifically to
> > avoid such conflicts.
> > 
> > That said, I didn't see an email from Stephen about this causing a
> > conflict in linux-next, so perhaps it's fine. If this pops up again it
> > might be worth considering to drop this from your tree so that I can
> > resolve the conflict in the Tegra tree.
> 
> Sorry about that, I went ahead and dropped the patch from my branch.

Applied to the Tegra tree now.

Thanks,
Thierry
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
index d3b99535d755..40c1bab22155 100644
--- a/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
+++ b/arch/arm/boot/dts/tegra20-acer-a500-picasso.dts
@@ -1,6 +1,7 @@ 
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
+#include <dt-bindings/input/atmel-maxtouch.h>
 #include <dt-bindings/input/gpio-keys.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/thermal/thermal.h>
@@ -450,6 +451,8 @@  touchscreen@4c {
 
 			avdd-supply = <&vdd_3v3_sys>;
 			vdd-supply  = <&vdd_3v3_sys>;
+
+			atmel,wakeup-method = <ATMEL_MXT_WAKEUP_I2C_SCL>;
 		};
 
 		gyroscope@68 {