| Message ID | 20210303033106.549-4-shawn.guo@linaro.org |
|---|---|
| State | Accepted |
| Commit | e526cb03e2aed42866a0919485a3d8ac130972cf |
| Headers | show |
| Series | Fix number of pins in 'gpio-ranges' | expand |
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi index 947e1accae3a..e7edb2593ba1 100644 --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi @@ -2689,7 +2689,7 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; - gpio-ranges = <&tlmm 0 0 180>; + gpio-ranges = <&tlmm 0 0 181>; wakeup-parent = <&pdc>; pri_mi2s_active: pri-mi2s-active {
The last cell of 'gpio-ranges' should be number of GPIO pins, and in case of qcom platform it should match msm_pinctrl_soc_data.ngpio rather than msm_pinctrl_soc_data.ngpio - 1. This fixes the problem that when the last GPIO pin in the range is configured with the following call sequence, it always fails with -EPROBE_DEFER. pinctrl_gpio_set_config() pinctrl_get_device_gpio_range() pinctrl_match_gpio_range() Fixes: 16951b490b20 ("arm64: dts: qcom: sm8250: Add TLMM pinctrl node") Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)