diff mbox series

[v3,1/2] dt-bindings: serial: Add rx-tx-swap to stm32-usart

Message ID 20210302131558.19375-1-devik@eaxlabs.cz
State New
Headers show
Series [v3,1/2] dt-bindings: serial: Add rx-tx-swap to stm32-usart | expand

Commit Message

Martin Devera March 2, 2021, 1:15 p.m. UTC
Add new rx-tx-swap property to allow for RX & TX pin swapping.

Signed-off-by: Martin Devera <devik@eaxlabs.cz>
---
 .../devicetree/bindings/serial/st,stm32-uart.yaml  | 32 +++++++++++++++-------
 1 file changed, 22 insertions(+), 10 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
index 8631678283f9..6eab2debebb5 100644
--- a/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
+++ b/Documentation/devicetree/bindings/serial/st,stm32-uart.yaml
@@ -9,9 +9,6 @@  maintainers:
 
 title: STMicroelectronics STM32 USART bindings
 
-allOf:
-  - $ref: rs485.yaml
-
 properties:
   compatible:
     enum:
@@ -40,6 +37,10 @@  properties:
 
   uart-has-rtscts: true
 
+  rx-tx-swap:
+    type: boolean
+    maxItems: 1
+
   dmas:
     minItems: 1
     maxItems: 2
@@ -66,13 +67,24 @@  properties:
   linux,rs485-enabled-at-boot-time: true
   rs485-rx-during-tx: true
 
-if:
-  required:
-    - st,hw-flow-ctrl
-then:
-  properties:
-    cts-gpios: false
-    rts-gpios: false
+allOf:
+  - $ref: rs485.yaml
+  - if:
+      required:
+        - st,hw-flow-ctrl
+    then:
+      properties:
+        cts-gpios: false
+        rts-gpios: false
+  - if:
+      required:
+        - rx-tx-swap
+    then:
+      properties:
+        compatible:
+          enum:
+            - st,stm32f7-uart
+            - st,stm32h7-uart
 
 required:
   - compatible