| Message ID | 20210313131826.GA17553@earth.li |
|---|---|
| State | New |
| Headers | show |
| Series | [net-next] net: stmmac: Set FIFO sizes for ipq806x | expand |
Hello: This patch was applied to netdev/net-next.git (refs/heads/master): On Sat, 13 Mar 2021 13:18:26 +0000 you wrote: > Commit eaf4fac47807 ("net: stmmac: Do not accept invalid MTU values") > started using the TX FIFO size to verify what counts as a valid MTU > request for the stmmac driver. This is unset for the ipq806x variant. > Looking at older patches for this it seems the RX + TXs buffers can be > up to 8k, so set appropriately. > > (I sent this as an RFC patch in June last year, but received no replies. > I've been running with this on my hardware (a MikroTik RB3011) since > then with larger MTUs to support both the internal qca8k switch and > VLANs with no problems. Without the patch it's impossible to set the > larger MTU required to support this.) > > [...] Here is the summary with links: - [net-next] net: stmmac: Set FIFO sizes for ipq806x https://git.kernel.org/netdev/net-next/c/e127906b68b4 You are awesome, thank you! -- Deet-doot-dot, I am a bot. https://korg.docs.kernel.org/patchwork/pwbot.html
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c index bf3250e0e59c..749585fe6fc9 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c @@ -352,6 +352,8 @@ static int ipq806x_gmac_probe(struct platform_device *pdev) plat_dat->bsp_priv = gmac; plat_dat->fix_mac_speed = ipq806x_gmac_fix_mac_speed; plat_dat->multicast_filter_bins = 0; + plat_dat->tx_fifo_size = 8192; + plat_dat->rx_fifo_size = 8192; err = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res); if (err)
Commit eaf4fac47807 ("net: stmmac: Do not accept invalid MTU values") started using the TX FIFO size to verify what counts as a valid MTU request for the stmmac driver. This is unset for the ipq806x variant. Looking at older patches for this it seems the RX + TXs buffers can be up to 8k, so set appropriately. (I sent this as an RFC patch in June last year, but received no replies. I've been running with this on my hardware (a MikroTik RB3011) since then with larger MTUs to support both the internal qca8k switch and VLANs with no problems. Without the patch it's impossible to set the larger MTU required to support this.) Signed-off-by: Jonathan McDowell <noodles@earth.li> --- drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c | 2 ++ 1 file changed, 2 insertions(+)