diff mbox

[v9,05/26] target-arm: add CPREG secure state support

Message ID 1415229793-3278-6-git-send-email-greg.bellows@linaro.org
State Superseded
Headers show

Commit Message

Greg Bellows Nov. 5, 2014, 11:22 p.m. UTC
From: Fabian Aggeler <aggelerf@ethz.ch>

Prepare ARMCPRegInfo to support specifying two fieldoffsets per
register definition. This will allow us to keep one register
definition for banked registers (different offsets for secure/
non-secure world).

Also added secure state tracking field and flags.  This allows for
identification of the register info secure state.

Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch>
Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

---

v8 -> v9
- Removed ARM_CP_SECSTATE_TEST macro
- Replaced dropped comment

v7 -> v8
- Break up the fieldoffset union to avoid need for sometimes overwriting one
  bank when updating fieldoffset.  This also removes the need for the #define
  short-cut introduced in v7.

v6 -> v7
- Add naming for fieldoffset fields and macros for accessing.  This was needed
  to overcome issues with the GCC-4.4 compiler.

v5 -> v6
- Separate out secure CPREG flags
- Add convenience macro for testing flags
- Removed extraneous newline
- Move add_cpreg_to_hashtable() functionality to a later commit for which it is
  dependent on.
- Added comment explaining fieldoffset padding

v4 -> v5
- Added ARM CP register secure and non-secure bank flags
- Added setting of secure and non-secure flags furing registration
---
 target-arm/cpu.h | 36 ++++++++++++++++++++++++++++++++++--
 1 file changed, 34 insertions(+), 2 deletions(-)
diff mbox

Patch

diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index 8d3717d..a9cbfc7 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -993,6 +993,21 @@  enum {
     ARM_CP_STATE_BOTH = 2,
 };
 
+/* ARM CP register secure state flags.  These flags identify security state
+ * attributes for a given CP register entry.
+ * The existence of both or neither secure and non-secure flags indicates that
+ * the register has both a secure and non-secure hash entry.  A single one of
+ * these flags causes the register to only be hashed for the specified
+ * security state.
+ * Although definitions may have any combination of the S/NS bits, each
+ * registered entry will only have one to identify whether the entry is secure
+ * or non-secure.
+ */
+enum {
+    ARM_CP_SECSTATE_S =   (1 << 0), /* bit[0]: Secure state register */
+    ARM_CP_SECSTATE_NS =  (1 << 1), /* bit[1]: Non-secure state register */
+};
+
 /* Return true if cptype is a valid type field. This is used to try to
  * catch errors where the sentinel has been accidentally left off the end
  * of a list of registers.
@@ -1127,6 +1142,8 @@  struct ARMCPRegInfo {
     int type;
     /* Access rights: PL*_[RW] */
     int access;
+    /* Security state: ARM_CP_SECSTATE_* bits/values */
+    int secure;
     /* The opaque pointer passed to define_arm_cp_regs_with_opaque() when
      * this register was defined: can be used to hand data through to the
      * register read/write functions, since they are passed the ARMCPRegInfo*.
@@ -1136,12 +1153,27 @@  struct ARMCPRegInfo {
      * fieldoffset is non-zero, the reset value of the register.
      */
     uint64_t resetvalue;
-    /* Offset of the field in CPUARMState for this register. This is not
-     * needed if either:
+    /* Offset of the field in CPUARMState for this register.
+     *
+     * This is not needed if either:
      *  1. type is ARM_CP_CONST or one of the ARM_CP_SPECIALs
      *  2. both readfn and writefn are specified
      */
     ptrdiff_t fieldoffset; /* offsetof(CPUARMState, field) */
+
+    /* Offsets of the secure and non-secure fields in CPUARMState for the
+     * register if it is banked.  These fields are only used during the static
+     * registration of a register.  During hashing the bank associated
+     * with a given security state is copied to fieldoffset which is used from
+     * there on out.
+     *
+     * It is expected that register definitions use either fieldoffset or
+     * bank_fieldoffsets in the definition but not both.  It is also expected
+     * that both bank offsets are set when defining a banked register.  This
+     * use indicates that a register is banked.
+     */
+    ptrdiff_t bank_fieldoffsets[2];
+
     /* Function for making any access checks for this register in addition to
      * those specified by the 'access' permissions bits. If NULL, no extra
      * checks required. The access check is performed at runtime, not at