diff mbox series

[v2,net-next,6/8] net: dsa: mv88e6xxx: Flood all traffic classes on standalone ports

Message ID 20210318141550.646383-7-tobias@waldekranz.com
State New
Headers show
Series net: dsa: mv88e6xxx: Offload bridge port flags | expand

Commit Message

Tobias Waldekranz March 18, 2021, 2:15 p.m. UTC 
In accordance with the comment in dsa_port_bridge_leave, standalone
ports shall be configured to flood all types of traffic. This change
aligns the mv88e6xxx driver with that policy.

Previously a standalone port would initially not egress any unknown
traffic, but after joining and then leaving a bridge, it would.

This does not matter that much since we only ever send FROM_CPUs on
standalone ports, but it seems prudent to make sure that the initial
values match those that are applied after a bridging/unbridging cycle.

Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/dsa/mv88e6xxx/chip.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 17578f774683..587959b78c7f 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -2489,19 +2489,15 @@  static int mv88e6xxx_setup_message_port(struct mv88e6xxx_chip *chip, int port)
 
 static int mv88e6xxx_setup_egress_floods(struct mv88e6xxx_chip *chip, int port)
 {
-	struct dsa_switch *ds = chip->ds;
-	bool flood;
 	int err;
 
-	/* Upstream ports flood frames with unknown unicast or multicast DA */
-	flood = dsa_is_cpu_port(ds, port) || dsa_is_dsa_port(ds, port);
 	if (chip->info->ops->port_set_ucast_flood) {
-		err = chip->info->ops->port_set_ucast_flood(chip, port, flood);
+		err = chip->info->ops->port_set_ucast_flood(chip, port, true);
 		if (err)
 			return err;
 	}
 	if (chip->info->ops->port_set_mcast_flood) {
-		err = chip->info->ops->port_set_mcast_flood(chip, port, flood);
+		err = chip->info->ops->port_set_mcast_flood(chip, port, true);
 		if (err)
 			return err;
 	}