@@ -462,9 +462,11 @@ static int mv3310_config_init(struct phy_device *phydev)
/* Check that the PHY interface type is compatible */
if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
phydev->interface != PHY_INTERFACE_MODE_2500BASEX &&
+ phydev->interface != PHY_INTERFACE_MODE_5GBASER &&
phydev->interface != PHY_INTERFACE_MODE_XAUI &&
phydev->interface != PHY_INTERFACE_MODE_RXAUI &&
- phydev->interface != PHY_INTERFACE_MODE_10GBASER)
+ phydev->interface != PHY_INTERFACE_MODE_10GBASER &&
+ phydev->interface != PHY_INTERFACE_MODE_USXGMII)
return -ENODEV;
phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
@@ -599,6 +601,7 @@ static void mv3310_update_interface(struct phy_device *phydev)
if ((phydev->interface == PHY_INTERFACE_MODE_SGMII ||
phydev->interface == PHY_INTERFACE_MODE_2500BASEX ||
+ phydev->interface == PHY_INTERFACE_MODE_5GBASER ||
phydev->interface == PHY_INTERFACE_MODE_10GBASER) &&
phydev->link) {
/* The PHY automatically switches its serdes interface (and
@@ -611,6 +614,9 @@ static void mv3310_update_interface(struct phy_device *phydev)
case SPEED_10000:
phydev->interface = PHY_INTERFACE_MODE_10GBASER;
break;
+ case SPEED_5000:
+ phydev->interface = PHY_INTERFACE_MODE_5GBASER;
+ break;
case SPEED_2500:
phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
break;
This modes are also supported by this PHYs. Signed-off-by: Marek BehĂșn <kabel@kernel.org> --- drivers/net/phy/marvell10g.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)