diff mbox series

spi: dt-bindings: nvidia,tegra210-quad: Use documented compatible "jedec,spi-nor" in example

Message ID 20210327203357.552794-1-robh@kernel.org
State New
Headers show
Series spi: dt-bindings: nvidia,tegra210-quad: Use documented compatible "jedec,spi-nor" in example | expand

Commit Message

Rob Herring March 27, 2021, 8:33 p.m. UTC
The 'spi-nor' compatible used in the example is not documented. Use the
documented 'jedec,spi-nor' compatible instead.

Cc: Mark Brown <broonie@kernel.org>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Jonathan Hunter <jonathanh@nvidia.com>
Cc: linux-spi@vger.kernel.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Rob Herring March 29, 2021, 1:52 p.m. UTC | #1
On Sat, Mar 27, 2021 at 03:33:57PM -0500, Rob Herring wrote:
> The 'spi-nor' compatible used in the example is not documented. Use the

> documented 'jedec,spi-nor' compatible instead.

> 

> Cc: Mark Brown <broonie@kernel.org>

> Cc: Thierry Reding <thierry.reding@gmail.com>

> Cc: Jonathan Hunter <jonathanh@nvidia.com>

> Cc: linux-spi@vger.kernel.org

> Cc: linux-tegra@vger.kernel.org

> Signed-off-by: Rob Herring <robh@kernel.org>

> ---

>  Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml | 2 +-

>  1 file changed, 1 insertion(+), 1 deletion(-)


Ugg, I guess I should have tested this first:

Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.example.dt.yaml: flash@0: 'nvidia,rx-clk-tap-delay', 'nvidia,tx-clk-tap-delay' do not match any of the regexes: '^partition@', 'pinctrl-[0-9]+'
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/mtd/jedec,spi-nor.yaml


This issue has come up a couple of times recently. There's not really an 
easy fix for this other than dropping the properties from the example 
and that doesn't help for actual dts file checks.

The issue is nvidia,tegra210-quad.yaml is applied to the SPI controller 
node and jedec,spi-nor.yaml is applied to the child node. Since those 
are independent, there's never a single schema with all possible child 
properties.

We could have a schema listing all these slave properties and every SPI 
slave binding has to reference that schema.

Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
index 35a8045b2c70..53627c6e2ae3 100644
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
@@ -106,7 +106,7 @@  examples:
             dma-names = "rx", "tx";
 
             flash@0 {
-                    compatible = "spi-nor";
+                    compatible = "jedec,spi-nor";
                     reg = <0>;
                     spi-max-frequency = <104000000>;
                     spi-tx-bus-width = <2>;