| Message ID | 1416337853-1558-1-git-send-email-tyler.baker@linaro.org |
|---|---|
| State | Accepted |
| Commit | 49e41938f8a53d01d1c5d133a038acb9650008f9 |
| Headers | show |
On 11/19/14 04:10, Tyler Baker wrote: Hi, + Arnd, Olof and Kevin > This patch fixes a long standing issue introduced during the 3.16 merge window. > Shortly after the merge, exynos5250-based arndale boards began to produce the > following errors: > > kern.err kernel: exynos-cpufreq exynos-cpufreq: failed to set cpu voltage > kern.err kernel: cpufreq: __target_index: Failed to change cpu frequency: -22 > > Further analysis revealed that the S5M8767 voltage regulator used on the > exynos5250-based arndale board utilizes the S3C2410 I2C controller. If the > S3C2410 I2C controller driver is not enabled, the S5M8767 voltage regulator > fails to probe. Therefore a dependency exists between these two drivers. > In the exynos_defconfig both CONFIG_REGULATOR_S5M8767 and CONFIG_I2C_S3C2410 > options are enabled, and no errors are produced. However, in the > multi_v7_defconfig only the CONFIG_REGULATOR_S5M8767 option is enabled and the > errors are present. So let's enable the CONFIG_I2C_S3C2410 option in the > multi_v7_defconfig to allow the S5M8767 voltage regulator to probe. > > Signed-off-by: Tyler Baker <tyler.baker@linaro.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Thanks, Kukjin > --- > This issue was reported [1]. I've also confirmed this fix on two different > arndale boards. > > [1] https://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg38765.html > > arch/arm/configs/multi_v7_defconfig | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig > index 3487046..9d7a32f 100644 > --- a/arch/arm/configs/multi_v7_defconfig > +++ b/arch/arm/configs/multi_v7_defconfig > @@ -217,6 +217,7 @@ CONFIG_I2C_CADENCE=y > CONFIG_I2C_DESIGNWARE_PLATFORM=y > CONFIG_I2C_EXYNOS5=y > CONFIG_I2C_MV64XXX=y > +CONFIG_I2C_S3C2410=y > CONFIG_I2C_SIRF=y > CONFIG_I2C_TEGRA=y > CONFIG_I2C_ST=y -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Kukjin Kim <kgene.kim@samsung.com> writes: > On 11/19/14 04:10, Tyler Baker wrote: > > Hi, > > + Arnd, Olof and Kevin > >> This patch fixes a long standing issue introduced during the 3.16 merge window. >> Shortly after the merge, exynos5250-based arndale boards began to produce the >> following errors: >> >> kern.err kernel: exynos-cpufreq exynos-cpufreq: failed to set cpu voltage >> kern.err kernel: cpufreq: __target_index: Failed to change cpu frequency: -22 >> >> Further analysis revealed that the S5M8767 voltage regulator used on the >> exynos5250-based arndale board utilizes the S3C2410 I2C controller. If the >> S3C2410 I2C controller driver is not enabled, the S5M8767 voltage regulator >> fails to probe. Therefore a dependency exists between these two drivers. >> In the exynos_defconfig both CONFIG_REGULATOR_S5M8767 and CONFIG_I2C_S3C2410 >> options are enabled, and no errors are produced. However, in the >> multi_v7_defconfig only the CONFIG_REGULATOR_S5M8767 option is enabled and the >> errors are present. So let's enable the CONFIG_I2C_S3C2410 option in the >> multi_v7_defconfig to allow the S5M8767 voltage regulator to probe. >> >> Signed-off-by: Tyler Baker <tyler.baker@linaro.org> > > Acked-by: Kukjin Kim <kgene.kim@samsung.com> Applied to arm-soc/fixes, which is merged into arm-soc/for-next. Thanks, Kevin -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 3487046..9d7a32f 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -217,6 +217,7 @@ CONFIG_I2C_CADENCE=y CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_I2C_EXYNOS5=y CONFIG_I2C_MV64XXX=y +CONFIG_I2C_S3C2410=y CONFIG_I2C_SIRF=y CONFIG_I2C_TEGRA=y CONFIG_I2C_ST=y
This patch fixes a long standing issue introduced during the 3.16 merge window. Shortly after the merge, exynos5250-based arndale boards began to produce the following errors: kern.err kernel: exynos-cpufreq exynos-cpufreq: failed to set cpu voltage kern.err kernel: cpufreq: __target_index: Failed to change cpu frequency: -22 Further analysis revealed that the S5M8767 voltage regulator used on the exynos5250-based arndale board utilizes the S3C2410 I2C controller. If the S3C2410 I2C controller driver is not enabled, the S5M8767 voltage regulator fails to probe. Therefore a dependency exists between these two drivers. In the exynos_defconfig both CONFIG_REGULATOR_S5M8767 and CONFIG_I2C_S3C2410 options are enabled, and no errors are produced. However, in the multi_v7_defconfig only the CONFIG_REGULATOR_S5M8767 option is enabled and the errors are present. So let's enable the CONFIG_I2C_S3C2410 option in the multi_v7_defconfig to allow the S5M8767 voltage regulator to probe. Signed-off-by: Tyler Baker <tyler.baker@linaro.org> --- This issue was reported [1]. I've also confirmed this fix on two different arndale boards. [1] https://www.mail-archive.com/linux-samsung-soc@vger.kernel.org/msg38765.html arch/arm/configs/multi_v7_defconfig | 1 + 1 file changed, 1 insertion(+)