diff mbox series

[03/15] ARM: dts: qcom: sdx55: Add CPUFreq support

Message ID 20210408170457.91409-4-manivannan.sadhasivam@linaro.org
State Accepted
Commit 0ec7bde7b590f8efa5823df3b52b32dd373060ff
Headers show
Series SDX55 devicetree updates | expand

Commit Message

Manivannan Sadhasivam April 8, 2021, 5:04 p.m. UTC 
Add CPUFreq support to SDX55 platform using the cpufreq-dt driver.
There is no dedicated hardware block available on this platform to
carry on the CPUFreq duties. Hence, it is accomplished using the CPU
clock and regulators tied together by the operating points table.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

---
 arch/arm/boot/dts/qcom-sdx55.dtsi | 29 +++++++++++++++++++++++++++++
 1 file changed, 29 insertions(+)

-- 
2.25.1
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index 8112a5283ce2..20cb2c903a91 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -53,6 +53,35 @@  cpu0: cpu@0 {
 			compatible = "arm,cortex-a7";
 			reg = <0x0>;
 			enable-method = "psci";
+			clocks = <&apcs>;
+			power-domains = <&rpmhpd SDX55_CX>;
+			power-domain-names = "rpmhpd";
+			operating-points-v2 = <&cpu_opp_table>;
+		};
+	};
+
+	cpu_opp_table: cpu-opp-table {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-345600000 {
+			opp-hz = /bits/ 64 <345600000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+
+		opp-1555200000 {
+			opp-hz = /bits/ 64 <1555200000>;
+			required-opps = <&rpmhpd_opp_turbo>;
 		};
 	};