diff mbox

[PULL,27/33] target-arm: make MAIR0/1 banked

Message ID 1418300395-4348-28-git-send-email-peter.maydell@linaro.org
State Accepted
Commit be693c87e440e671ed913784554384349ce8331d
Headers show

Commit Message

Peter Maydell Dec. 11, 2014, 12:19 p.m. UTC 
From: Greg Bellows <greg.bellows@linaro.org>

Added CP register info entries for the ARMv7 MAIR0/1 secure banks.

Signed-off-by: Greg Bellows <greg.bellows@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1416242878-876-26-git-send-email-greg.bellows@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 target-arm/cpu.h    | 21 ++++++++++++++++++++-
 target-arm/helper.c | 12 +++++++++---
 2 files changed, 29 insertions(+), 4 deletions(-)
diff mbox

Patch

diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index a1fefe4..7ba55f0 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -296,7 +296,26 @@  typedef struct CPUARMState {
         uint32_t c9_pmxevtyper; /* perf monitor event type */
         uint32_t c9_pmuserenr; /* perf monitor user enable */
         uint32_t c9_pminten; /* perf monitor interrupt enables */
-        uint64_t mair_el1;
+        union { /* Memory attribute redirection */
+            struct {
+#ifdef HOST_WORDS_BIGENDIAN
+                uint64_t _unused_mair_0;
+                uint32_t mair1_ns;
+                uint32_t mair0_ns;
+                uint64_t _unused_mair_1;
+                uint32_t mair1_s;
+                uint32_t mair0_s;
+#else
+                uint64_t _unused_mair_0;
+                uint32_t mair0_ns;
+                uint32_t mair1_ns;
+                uint64_t _unused_mair_1;
+                uint32_t mair0_s;
+                uint32_t mair1_s;
+#endif
+            };
+            uint64_t mair_el[4];
+        };
         union { /* vector base address register */
             struct {
                 uint64_t _unused_vbar;
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 0357f41..96abbed 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -965,20 +965,26 @@  static const ARMCPRegInfo v7_cp_reginfo[] = {
      */
     { .name = "MAIR_EL1", .state = ARM_CP_STATE_AA64,
       .opc0 = 3, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 0,
-      .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.mair_el1),
+      .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.mair_el[1]),
       .resetvalue = 0 },
     /* For non-long-descriptor page tables these are PRRR and NMRR;
      * regardless they still act as reads-as-written for QEMU.
      * The override is necessary because of the overly-broad TLB_LOCKDOWN
      * definition.
      */
+     /* MAIR0/1 are defined seperately from their 64-bit counterpart which
+      * allows them to assign the correct fieldoffset based on the endianness
+      * handled in the field definitions.
+      */
     { .name = "MAIR0", .state = ARM_CP_STATE_AA32, .type = ARM_CP_OVERRIDE,
       .cp = 15, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 0, .access = PL1_RW,
-      .fieldoffset = offsetoflow32(CPUARMState, cp15.mair_el1),
+      .bank_fieldoffsets = { offsetof(CPUARMState, cp15.mair0_s),
+                             offsetof(CPUARMState, cp15.mair0_ns) },
       .resetfn = arm_cp_reset_ignore },
     { .name = "MAIR1", .state = ARM_CP_STATE_AA32, .type = ARM_CP_OVERRIDE,
       .cp = 15, .opc1 = 0, .crn = 10, .crm = 2, .opc2 = 1, .access = PL1_RW,
-      .fieldoffset = offsetofhigh32(CPUARMState, cp15.mair_el1),
+      .bank_fieldoffsets = { offsetof(CPUARMState, cp15.mair1_s),
+                             offsetof(CPUARMState, cp15.mair1_ns) },
       .resetfn = arm_cp_reset_ignore },
     { .name = "ISR_EL1", .state = ARM_CP_STATE_BOTH,
       .opc0 = 3, .opc1 = 0, .crn = 12, .crm = 1, .opc2 = 0,