diff mbox series

[v2,1/2] dt-bindings: bcm4329-fmac: add optional brcm,ccode-map

Message ID 20210415104728.8471-2-shawn.guo@linaro.org
State Accepted
Commit b4193622707846637ea58bd3bdcaf8be997c4db9
Headers show
Series brcmfmac: support parse country code map from DT | expand

Commit Message

Shawn Guo April 15, 2021, 10:47 a.m. UTC
Add optional brcm,ccode-map property to support translation from ISO3166
country code to brcmfmac firmware country code and revision.

The country revision is needed because the RF parameters that provide
regulatory compliance are tweaked per platform/customer.  So depending
on the RF path tight to the chip, certain country revision needs to be
specified.  As such they could be seen as device specific calibration
data which is a good fit into device tree.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>

---
 .../bindings/net/wireless/brcm,bcm4329-fmac.yaml          | 8 ++++++++
 1 file changed, 8 insertions(+)

-- 
2.17.1

Comments

Rob Herring April 15, 2021, 9:34 p.m. UTC | #1
On Thu, 15 Apr 2021 18:47:27 +0800, Shawn Guo wrote:
> Add optional brcm,ccode-map property to support translation from ISO3166

> country code to brcmfmac firmware country code and revision.

> 

> The country revision is needed because the RF parameters that provide

> regulatory compliance are tweaked per platform/customer.  So depending

> on the RF path tight to the chip, certain country revision needs to be

> specified.  As such they could be seen as device specific calibration

> data which is a good fit into device tree.

> 

> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>

> ---

>  .../bindings/net/wireless/brcm,bcm4329-fmac.yaml          | 8 ++++++++

>  1 file changed, 8 insertions(+)

> 


Applied, thanks!
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
index b5fcc73ce6be..c11f23b20c4c 100644
--- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
+++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml
@@ -68,6 +68,13 @@  properties:
     description: A GPIO line connected to the WL_RST line, if present
       this shall be flagged as active low.
 
+  brcm,ccode-map:
+    $ref: /schemas/types.yaml#/definitions/string-array
+    description: Multiple strings for translating ISO3166 country code to
+      brcmfmac firmware country code and revision.
+    items:
+      pattern: '^[A-Z][A-Z]-[A-Z][0-9A-Z]-[0-9]+$'
+
 required:
   - compatible
   - reg
@@ -97,5 +104,6 @@  examples:
         interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
         interrupt-names = "host-wake";
         reset-gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+        brcm,ccode-map = "JP-JP-78", "US-Q2-86";
       };
     };