diff mbox series

arm64: boot: dts: qcom: sm8150: add SPI nodes

Message ID 20210415103854.1810788-1-balbi@kernel.org
State Superseded
Headers show
Series arm64: boot: dts: qcom: sm8150: add SPI nodes | expand

Commit Message

Felipe Balbi April 15, 2021, 10:38 a.m. UTC
From: Felipe Balbi <felipe.balbi@microsoft.com>

Add missing SPI nodes for SM8150.

Signed-off-by: Felipe Balbi <felipe.balbi@microsoft.com>
---

Tested on Microsoft Surface Duo (DTS will be sent after -rc1). This
patch also depends on i2c nodes patch by Caleb Connolly

 arch/arm64/boot/dts/qcom/sm8150.dtsi | 601 ++++++++++++++++++++++++++-
 1 file changed, 599 insertions(+), 2 deletions(-)

Comments

Felipe Balbi April 15, 2021, 11:01 a.m. UTC | #1
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> writes:

> Hi,
>
> On Thu, 15 Apr 2021 at 13:39, Felipe Balbi <balbi@kernel.org> wrote:
>>
>> From: Felipe Balbi <felipe.balbi@microsoft.com>
>>
>> Add missing SPI nodes for SM8150.
>>
>> Signed-off-by: Felipe Balbi <felipe.balbi@microsoft.com>
>
> I'd suggest switching to gpio-cs as implemented for sc7180 and sm8250.
> At least I'd propose to split the pinctrl into data+clock and CS
> configurations, so that the CS implementation can be easily selected
> on the board level.

I can do that, sure. What do we gain from it, though? The possibility of
using more chip selects? It also sounds to me like this could be done as
a separate patch.
Dmitry Baryshkov April 15, 2021, 11:22 a.m. UTC | #2
On Thu, 15 Apr 2021 at 14:02, Felipe Balbi <balbi@kernel.org> wrote:
>
> Dmitry Baryshkov <dmitry.baryshkov@linaro.org> writes:
>
> > On Thu, 15 Apr 2021 at 13:39, Felipe Balbi <balbi@kernel.org> wrote:
> >>
> >> From: Felipe Balbi <felipe.balbi@microsoft.com>
> >>
> >> Add missing SPI nodes for SM8150.
> >>
> >> Signed-off-by: Felipe Balbi <felipe.balbi@microsoft.com>
> >
> > I'd suggest switching to gpio-cs as implemented for sc7180 and sm8250.
> > At least I'd propose to split the pinctrl into data+clock and CS
> > configurations, so that the CS implementation can be easily selected
> > on the board level.
>
> I can do that, sure. What do we gain from it, though? The possibility of
> using more chip selects? It also sounds to me like this could be done as
> a separate patch.

I'd refer to the original discussion for sc7180:
https://lore.kernel.org/linux-arm-msm/20200624170746.1.I997a428f58ef9d48b37a27a028360f34e66c00ec@changeid/
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 7207a3689d9d..97007e1a6533 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -602,6 +602,21 @@  i2c0: i2c@880000 {
 				status = "disabled";
 			};
 
+			spi0: spi@880000 {
+				compatible = "qcom,spi-geni";
+				reg = <0 0x880000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi0_default>;
+				interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			i2c1: i2c@884000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00884000 0 0x4000>;
@@ -615,6 +630,21 @@  i2c1: i2c@884000 {
 				status = "disabled";
 			};
 
+			spi1: spi@884000 {
+				compatible = "qcom,spi-geni";
+				reg = <0 0x884000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi1_default>;
+				interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			i2c2: i2c@888000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00888000 0 0x4000>;
@@ -628,6 +658,21 @@  i2c2: i2c@888000 {
 				status = "disabled";
 			};
 
+			spi2: spi@888000 {
+				compatible = "qcom,spi-geni";
+				reg = <0 0x888000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi2_default>;
+				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			i2c3: i2c@88c000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x0088c000 0 0x4000>;
@@ -641,6 +686,21 @@  i2c3: i2c@88c000 {
 				status = "disabled";
 			};
 
+			spi3: spi@88c000 {
+				compatible = "qcom,spi-geni";
+				reg = <0 0x88c000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi3_default>;
+				interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			i2c4: i2c@890000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00890000 0 0x4000>;
@@ -654,6 +714,21 @@  i2c4: i2c@890000 {
 				status = "disabled";
 			};
 
+			spi4: spi@890000 {
+				compatible = "qcom,spi-geni";
+				reg = <0 0x890000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi4_default>;
+				interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			i2c5: i2c@894000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00894000 0 0x4000>;
@@ -667,6 +742,21 @@  i2c5: i2c@894000 {
 				status = "disabled";
 			};
 
+			spi5: spi@894000 {
+				compatible = "qcom,spi-geni";
+				reg = <0 0x894000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi5_default>;
+				interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			i2c6: i2c@898000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00898000 0 0x4000>;
@@ -680,6 +770,21 @@  i2c6: i2c@898000 {
 				status = "disabled";
 			};
 
+			spi6: spi@898000 {
+				compatible = "qcom,spi-geni";
+				reg = <0 0x898000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S6_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi6_default>;
+				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			i2c7: i2c@89c000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x0089c000 0 0x4000>;
@@ -693,6 +798,20 @@  i2c7: i2c@89c000 {
 				status = "disabled";
 			};
 
+			spi7: spi@89c000 {
+				compatible = "qcom,spi-geni";
+				reg = <0 0x89c000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP0_S7_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi7_default>;
+				interrupts = <GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		qupv3_id_1: geniqup@ac0000 {
@@ -720,6 +839,21 @@  i2c8: i2c@a80000 {
 				status = "disabled";
 			};
 
+			spi8: spi@a80000 {
+				compatible = "qcom,spi-geni";
+				reg = <0 0xa80000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi8_default>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			i2c9: i2c@a84000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00a84000 0 0x4000>;
@@ -733,6 +867,21 @@  i2c9: i2c@a84000 {
 				status = "disabled";
 			};
 
+			spi9: spi@a84000 {
+				compatible = "qcom,spi-geni";
+				reg = <0 0xa84000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi9_default>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			i2c10: i2c@a88000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00a88000 0 0x4000>;
@@ -746,6 +895,21 @@  i2c10: i2c@a88000 {
 				status = "disabled";
 			};
 
+			spi10: spi@a88000 {
+				compatible = "qcom,spi-geni";
+				reg = <0 0xa88000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi10_default>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			i2c11: i2c@a8c000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00a8c000 0 0x4000>;
@@ -759,6 +923,21 @@  i2c11: i2c@a8c000 {
 				status = "disabled";
 			};
 
+			spi11: spi@a8c000 {
+				compatible = "qcom,spi-geni";
+				reg = <0 0xa8c000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi11_default>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			uart2: serial@a90000 {
 				compatible = "qcom,geni-debug-uart";
 				reg = <0x0 0x00a90000 0x0 0x4000>;
@@ -781,6 +960,21 @@  i2c12: i2c@a90000 {
 				status = "disabled";
 			};
 
+			spi12: spi@a90000 {
+				compatible = "qcom,spi-geni";
+				reg = <0 0xa90000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi12_default>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			i2c16: i2c@94000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x0094000 0 0x4000>;
@@ -793,6 +987,21 @@  i2c16: i2c@94000 {
 				#size-cells = <0>;
 				status = "disabled";
 			};
+
+			spi16: spi@a94000 {
+				compatible = "qcom,spi-geni";
+				reg = <0 0xa94000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi16_default>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		qupv3_id_2: geniqup@cc0000 {
@@ -821,6 +1030,21 @@  i2c17: i2c@c80000 {
 				status = "disabled";
 			};
 
+			spi17: spi@c80000 {
+				compatible = "qcom,spi-geni";
+				reg = <0 0xc80000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi17_default>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			i2c18: i2c@c84000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00c84000 0 0x4000>;
@@ -834,6 +1058,21 @@  i2c18: i2c@c84000 {
 				status = "disabled";
 			};
 
+			spi18: spi@c84000 {
+				compatible = "qcom,spi-geni";
+				reg = <0 0xc84000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi18_default>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			i2c19: i2c@c88000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00c88000 0 0x4000>;
@@ -847,6 +1086,21 @@  i2c19: i2c@c88000 {
 				status = "disabled";
 			};
 
+			spi19: spi@c88000 {
+				compatible = "qcom,spi-geni";
+				reg = <0 0xc88000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi19_default>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			i2c13: i2c@c8c000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00c8c000 0 0x4000>;
@@ -860,6 +1114,21 @@  i2c13: i2c@c8c000 {
 				status = "disabled";
 			};
 
+			spi13: spi@c8c000 {
+				compatible = "qcom,spi-geni";
+				reg = <0 0xc8c000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi13_default>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			i2c14: i2c@c90000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00c90000 0 0x4000>;
@@ -873,6 +1142,21 @@  i2c14: i2c@c90000 {
 				status = "disabled";
 			};
 
+			spi14: spi@c90000 {
+				compatible = "qcom,spi-geni";
+				reg = <0 0xc90000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi14_default>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
+
 			i2c15: i2c@c94000 {
 				compatible = "qcom,geni-i2c";
 				reg = <0 0x00c94000 0 0x4000>;
@@ -885,6 +1169,21 @@  i2c15: i2c@c94000 {
 				#size-cells = <0>;
 				status = "disabled";
 			};
+
+			spi15: spi@c94000 {
+				compatible = "qcom,spi-geni";
+				reg = <0 0xc94000 0 0x4000>;
+				reg-names = "se";
+				clock-names = "se";
+				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&qup_spi15_default>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				spi-max-frequency = <50000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				status = "disabled";
+			};
 		};
 
 		config_noc: interconnect@1500000 {
@@ -1222,6 +1521,19 @@  config {
 				};
 			};
 
+			qup_spi0_default: qup-spi0-default {
+				mux {
+					pins = "gpio0", "gpio1", "gpio2", "gpio3";
+					function = "qup0";
+				};
+
+				config {
+					pins = "gpio0", "gpio1", "gpio2", "gpio3";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
 			qup_i2c1_default: qup-i2c1-default {
 				mux {
 					pins = "gpio114", "gpio115";
@@ -1235,6 +1547,21 @@  config {
 				};
 			};
 
+			qup_spi1_default: qup-spi1-default {
+				mux {
+					pins = "gpio114", "gpio115", "gpio116",
+						"gpio117";
+					function = "qup1";
+				};
+
+				config {
+					pins = "gpio114", "gpio115", "gpio116",
+						"gpio117";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
 			qup_i2c2_default: qup-i2c2-default {
 				mux {
 					pins = "gpio126", "gpio127";
@@ -1248,6 +1575,21 @@  config {
 				};
 			};
 
+			qup_spi2_default: qup-spi2-default {
+				mux {
+					pins = "gpio126", "gpio127", "gpio128",
+						"gpio129";
+					function = "qup2";
+				};
+
+				config {
+					pins = "gpio126", "gpio127", "gpio128",
+						"gpio129";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
 			qup_i2c3_default: qup-i2c3-default {
 				mux {
 					pins = "gpio144", "gpio145";
@@ -1261,6 +1603,21 @@  config {
 				};
 			};
 
+			qup_spi3_default: qup-spi3-default {
+				mux {
+					pins = "gpio144", "gpio145", "gpio146",
+						"gpio147";
+					function = "qup3";
+				};
+
+				config {
+					pins = "gpio144", "gpio145", "gpio146",
+						"gpio147";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
 			qup_i2c4_default: qup-i2c4-default {
 				mux {
 					pins = "gpio51", "gpio52";
@@ -1274,6 +1631,21 @@  config {
 				};
 			};
 
+			qup_spi4_default: qup-spi4-default {
+				mux {
+					pins = "gpio51", "gpio52", "gpio53",
+						"gpio54";
+					function = "qup4";
+				};
+
+				config {
+					pins = "gpio51", "gpio52", "gpio53",
+						"gpio54";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
 			qup_i2c5_default: qup-i2c5-default {
 				mux {
 					pins = "gpio121", "gpio122";
@@ -1282,7 +1654,22 @@  mux {
 
 				config {
 					pins = "gpio121", "gpio122";
-					drive-strength = <0x02>;
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_spi5_default: qup-spi5-default {
+				mux {
+					pins = "gpio119", "gpio120", "gpio121",
+						"gpio122";
+					function = "qup5";
+				};
+
+				config {
+					pins = "gpio119", "gpio120", "gpio121",
+						"gpio122";
+					drive-strength = <6>;
 					bias-disable;
 				};
 			};
@@ -1295,7 +1682,22 @@  mux {
 
 				config {
 					pins = "gpio6", "gpio7";
-					drive-strength = <0x02>;
+					drive-strength = <2>;
+					bias-disable;
+				};
+			};
+
+			qup_spi6_default: qup-spi6_default {
+				mux {
+					pins = "gpio4", "gpio5", "gpio6",
+						"gpio7";
+					function = "qup6";
+				};
+
+				config {
+					pins = "gpio4", "gpio5", "gpio6",
+						"gpio7";
+					drive-strength = <6>;
 					bias-disable;
 				};
 			};
@@ -1313,6 +1715,21 @@  config {
 				};
 			};
 
+			qup_spi7_default: qup-spi7_default {
+				mux {
+					pins = "gpio98", "gpio99", "gpio100",
+						"gpio101";
+					function = "qup7";
+				};
+
+				config {
+					pins = "gpio98", "gpio99", "gpio100",
+						"gpio101";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
 			qup_i2c8_default: qup-i2c8-default {
 				mux {
 					pins = "gpio88", "gpio89";
@@ -1326,6 +1743,21 @@  config {
 				};
 			};
 
+			qup_spi8_default: qup-spi8-default {
+				mux {
+					pins = "gpio88", "gpio89", "gpio90",
+						"gpio91";
+					function = "qup8";
+				};
+
+				config {
+					pins = "gpio88", "gpio89", "gpio90",
+						"gpio91";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
 			qup_i2c9_default: qup-i2c9-default {
 				mux {
 					pins = "gpio39", "gpio40";
@@ -1339,6 +1771,21 @@  config {
 				};
 			};
 
+			qup_spi9_default: qup-spi9-default {
+				mux {
+					pins = "gpio39", "gpio40", "gpio41",
+						"gpio42";
+					function = "qup9";
+				};
+
+				config {
+					pins = "gpio39", "gpio40", "gpio41",
+						"gpio42";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
 			qup_i2c10_default: qup-i2c10-default {
 				mux {
 					pins = "gpio9", "gpio10";
@@ -1352,6 +1799,21 @@  config {
 				};
 			};
 
+			qup_spi10_default: qup-spi10-default {
+				mux {
+					pins = "gpio9", "gpio10", "gpio11",
+						"gpio12";
+					function = "qup10";
+				};
+
+				config {
+					pins = "gpio9", "gpio10", "gpio11",
+						"gpio12";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
 			qup_i2c11_default: qup-i2c11-default {
 				mux {
 					pins = "gpio94", "gpio95";
@@ -1365,6 +1827,21 @@  config {
 				};
 			};
 
+			qup_spi11_default: qup-spi11-default {
+				mux {
+					pins = "gpio92", "gpio93", "gpio94",
+						"gpio95";
+					function = "qup11";
+				};
+
+				config {
+					pins = "gpio92", "gpio93", "gpio94",
+						"gpio95";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
 			qup_i2c12_default: qup-i2c12-default {
 				mux {
 					pins = "gpio83", "gpio84";
@@ -1378,6 +1855,21 @@  config {
 				};
 			};
 
+			qup_spi12_default: qup-spi12-default {
+				mux {
+					pins = "gpio83", "gpio84", "gpio85",
+						"gpio86";
+					function = "qup12";
+				};
+
+				config {
+					pins = "gpio83", "gpio84", "gpio85",
+						"gpio86";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
 			qup_i2c13_default: qup-i2c13-default {
 				mux {
 					pins = "gpio43", "gpio44";
@@ -1391,6 +1883,21 @@  config {
 				};
 			};
 
+			qup_spi13_default: qup-spi13-default {
+				mux {
+					pins = "gpio43", "gpio44", "gpio45",
+						"gpio46";
+					function = "qup13";
+				};
+
+				config {
+					pins = "gpio43", "gpio44", "gpio45",
+						"gpio46";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
 			qup_i2c14_default: qup-i2c14-default {
 				mux {
 					pins = "gpio47", "gpio48";
@@ -1404,6 +1911,21 @@  config {
 				};
 			};
 
+			qup_spi14_default: qup-spi14-default {
+				mux {
+					pins = "gpio47", "gpio48", "gpio49",
+						"gpio50";
+					function = "qup14";
+				};
+
+				config {
+					pins = "gpio47", "gpio48", "gpio49",
+						"gpio50";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
 			qup_i2c15_default: qup-i2c15-default {
 				mux {
 					pins = "gpio27", "gpio28";
@@ -1417,6 +1939,21 @@  config {
 				};
 			};
 
+			qup_spi15_default: qup-spi15-default {
+				mux {
+					pins = "gpio27", "gpio28", "gpio29",
+						"gpio30";
+					function = "qup15";
+				};
+
+				config {
+					pins = "gpio27", "gpio28", "gpio29",
+						"gpio30";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
 			qup_i2c16_default: qup-i2c16-default {
 				mux {
 					pins = "gpio86", "gpio85";
@@ -1430,6 +1967,21 @@  config {
 				};
 			};
 
+			qup_spi16_default: qup-spi16-default {
+				mux {
+					pins = "gpio83", "gpio84", "gpio85",
+						"gpio86";
+					function = "qup16";
+				};
+
+				config {
+					pins = "gpio83", "gpio84", "gpio85",
+						"gpio86";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
 			qup_i2c17_default: qup-i2c17-default {
 				mux {
 					pins = "gpio55", "gpio56";
@@ -1443,6 +1995,21 @@  config {
 				};
 			};
 
+			qup_spi17_default: qup-spi17-default {
+				mux {
+					pins = "gpio55", "gpio56", "gpio57",
+						"gpio58";
+					function = "qup17";
+				};
+
+				config {
+					pins = "gpio55", "gpio56", "gpio57",
+						"gpio58";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
 			qup_i2c18_default: qup-i2c18-default {
 				mux {
 					pins = "gpio23", "gpio24";
@@ -1456,6 +2023,21 @@  config {
 				};
 			};
 
+			qup_spi18_default: qup-spi18-default {
+				mux {
+					pins = "gpio23", "gpio24", "gpio25",
+						"gpio26";
+					function = "qup18";
+				};
+
+				config {
+					pins = "gpio23", "gpio24", "gpio25",
+						"gpio26";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
+
 			qup_i2c19_default: qup-i2c19-default {
 				mux {
 					pins = "gpio57", "gpio58";
@@ -1468,6 +2050,21 @@  config {
 					bias-disable;
 				};
 			};
+
+			qup_spi19_default: qup-spi19-default {
+				mux {
+					pins = "gpio55", "gpio56", "gpio57",
+						"gpio58";
+					function = "qup19";
+				};
+
+				config {
+					pins = "gpio55", "gpio56", "gpio57",
+						"gpio58";
+					drive-strength = <6>;
+					bias-disable;
+				};
+			};
 		};
 
 		remoteproc_mpss: remoteproc@4080000 {