diff mbox

[v3,2/3] net/fec: fix fec1 check in fec_enet_mii_init()

Message ID 1316621270-27805-3-git-send-email-shawn.guo@linaro.org
State New
Headers show

Commit Message

Shawn Guo Sept. 21, 2011, 4:07 p.m. UTC
In function fec_enet_mii_init(), it uses non-zero pdev->id as part
of the condition to check the second fec instance (fec1).  This works
before the driver supports device tree probe.  But in case of device
tree probe, pdev->id is -1 which is also non-zero, so the logic becomes
broken when device tree probe gets supported.

The patch change the logic to check "pdev->id > 0" as the part of the
condition for identifying fec1.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/net/ethernet/freescale/fec.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/ethernet/freescale/fec.c b/drivers/net/ethernet/freescale/fec.c
index 9c1d059..2bbe6a5 100644
--- a/drivers/net/ethernet/freescale/fec.c
+++ b/drivers/net/ethernet/freescale/fec.c
@@ -996,7 +996,7 @@  static int fec_enet_mii_init(struct platform_device *pdev)
 	 * mdio interface in board design, and need to be configured by
 	 * fec0 mii_bus.
 	 */
-	if ((id_entry->driver_data & FEC_QUIRK_ENET_MAC) && pdev->id) {
+	if ((id_entry->driver_data & FEC_QUIRK_ENET_MAC) && pdev->id > 0) {
 		/* fec1 uses fec0 mii_bus */
 		fep->mii_bus = fec0_mii_bus;
 		return 0;