diff mbox series

[net-next,2/5] dt-bindings: net: fsl: enetc: add the IERB documentation

Message ID 20210416234225.3715819-3-olteanv@gmail.com
State New
Headers show
Series Flow control for NXP ENETC | expand

Commit Message

Vladimir Oltean April 16, 2021, 11:42 p.m. UTC
From: Vladimir Oltean <vladimir.oltean@nxp.com>

Mention the required compatible string and base address for the
Integrated Endpoint Register Block node.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
---
 .../devicetree/bindings/net/fsl-enetc.txt         | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/fsl-enetc.txt b/Documentation/devicetree/bindings/net/fsl-enetc.txt
index b7034ccbc1bd..9b9a3f197e2d 100644
--- a/Documentation/devicetree/bindings/net/fsl-enetc.txt
+++ b/Documentation/devicetree/bindings/net/fsl-enetc.txt
@@ -102,3 +102,18 @@  Example:
 			full-duplex;
 		};
 	};
+
+* Integrated Endpoint Register Block bindings
+
+Optionally, the fsl_enetc driver can probe on the Integrated Endpoint Register
+Block, which preconfigures the FIFO limits for the ENETC ports. This is a node
+with the following properties:
+
+- reg		: Specifies the address in the SoC memory space.
+- compatible	: Must be "fsl,ls1028a-enetc-ierb".
+
+Example:
+	ierb@1f0800000 {
+		compatible = "fsl,ls1028a-enetc-ierb";
+		reg = <0x01 0xf0800000 0x0 0x10000>;
+	};