| Message ID | 20210426024118.18717-1-ezequiel@collabora.com |
|---|---|
| State | New |
| Headers | show |
| Series | [1/3] arm64: dts: rockchip: Remove unnecessary reset in rk3328.dtsi | expand |
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index 5bab61784735..3ed69ecbcf3c 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -916,8 +916,8 @@ gmac2phy: ethernet@ff550000 { "mac_clk_tx", "clk_mac_ref", "aclk_mac", "pclk_mac", "clk_macphy"; - resets = <&cru SRST_GMAC2PHY_A>, <&cru SRST_MACPHY>; - reset-names = "stmmaceth", "mac-phy"; + resets = <&cru SRST_GMAC2PHY_A>; + reset-names = "stmmaceth"; phy-mode = "rmii"; phy-handle = <&phy>; snps,txpbl = <0x4>;
Rockchip DWMAC glue driver uses the phy node (phy-handle) reset specifier, and not a "mac-phy" reset specifier. Remove it. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> --- arch/arm64/boot/dts/rockchip/rk3328.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)