@@ -1099,6 +1099,8 @@ dtb-$(CONFIG_TARGET_PRESIDIO_ASIC) += ca-presidio-engboard.dtb
dtb-$(CONFIG_TARGET_IMX8MM_CL_IOT_GATE) += imx8mm-cl-iot-gate.dtb
+dtb-$(CONFIG_ARCH_SYNQUACER) += synquacer-sc2a11-developerbox.dtb
+
targets += $(dtb-y)
# Add any required device tree compiler flags here
new file mode 100644
@@ -0,0 +1,73 @@
+/** @file
+ * Copyright (c) 2018, Linaro Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-2-Clause-Patent
+ */
+
+#define __L1(cpuref, l2ref) \
+cpuref { \
+ i-cache-size = <0x8000>; \
+ i-cache-line-size = <64>; \
+ i-cache-sets = <256>; \
+ d-cache-size = <0x8000>; \
+ d-cache-line-size = <64>; \
+ d-cache-sets = <128>; \
+ l2-cache = <l2ref>; \
+};
+
+#define __L2(idx) \
+L2_##idx: l2-cache##idx { \
+ cache-size = <0x40000>; \
+ cache-line-size = <64>; \
+ cache-sets = <256>; \
+ cache-unified; \
+ next-level-cache = <&L3>; \
+};
+
+/ {
+ __L2(0)
+ __L2(1)
+ __L2(2)
+ __L2(3)
+ __L2(4)
+ __L2(5)
+ __L2(6)
+ __L2(7)
+ __L2(8)
+ __L2(9)
+ __L2(10)
+ __L2(11)
+
+ L3: l3-cache {
+ cache-level = <3>;
+ cache-size = <0x400000>;
+ cache-line-size = <64>;
+ cache-sets = <4096>;
+ cache-unified;
+ };
+};
+
+__L1(&CPU0, &L2_0)
+__L1(&CPU1, &L2_0)
+__L1(&CPU2, &L2_1)
+__L1(&CPU3, &L2_1)
+__L1(&CPU4, &L2_2)
+__L1(&CPU5, &L2_2)
+__L1(&CPU6, &L2_3)
+__L1(&CPU7, &L2_3)
+__L1(&CPU8, &L2_4)
+__L1(&CPU9, &L2_4)
+__L1(&CPU10, &L2_5)
+__L1(&CPU11, &L2_5)
+__L1(&CPU12, &L2_6)
+__L1(&CPU13, &L2_6)
+__L1(&CPU14, &L2_7)
+__L1(&CPU15, &L2_7)
+__L1(&CPU16, &L2_8)
+__L1(&CPU17, &L2_8)
+__L1(&CPU18, &L2_9)
+__L1(&CPU19, &L2_9)
+__L1(&CPU20, &L2_10)
+__L1(&CPU21, &L2_10)
+__L1(&CPU22, &L2_11)
+__L1(&CPU23, &L2_11)
new file mode 100644
@@ -0,0 +1,75 @@
+// SPDX-License-Identifier: BSD-2-Clause-Patent
+//
+// Copyright (c) 2021, Linaro Limited. All rights reserved.
+//
+
+/ {
+ aliases {
+ spi_nor = &spi_nor;
+ i2c0 = &i2c0;
+ };
+
+ spi_nor: spi@54800000 {
+ compatible = "socionext,synquacer-spi";
+ reg = <0x00 0x54800000 0x00 0x1000>;
+ interrupts = <0x00 0x9c 0x04 0x00 0x9d 0x04 0x00 0x9e 0x04>;
+ clocks = <&clk_alw_1_8>;
+ clock-names = "iHCLK";
+ socionext,use-rtm;
+ socionext,set-aces;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+ active_clk_edges;
+ chipselect_num = <1>;
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <31250000>;
+ spi-rx-bus-width = <0x1>;
+ spi-tx-bus-width = <0x1>;
+ };
+ };
+
+ i2c0: i2c@51200000 {
+ compatible = "socionext,synquacer-i2c";
+ reg = <0x0 0x51200000 0x0 0x1000>;
+ interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_i2c>;
+ clock-names = "pclk";
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ pcf8563: rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+ };
+
+ firmware {
+ optee {
+ status = "okay";
+ };
+ };
+};
+
+&smmu {
+ status = "okay";
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&pcie1 {
+ status = "okay";
+};
+
+&sdhci {
+ status = "okay";
+};
new file mode 100644
@@ -0,0 +1,56 @@
+/** @file
+ * Copyright (c) 2017, Linaro Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-2-Clause-Patent
+ */
+
+/dts-v1/;
+
+#include "synquacer-sc2a11.dtsi"
+
+#define KEY_POWER 116
+
+/ {
+ model = "Socionext Developer Box";
+ compatible = "socionext,developer-box", "socionext,synquacer";
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ interrupt-parent = <&exiu>;
+
+ power {
+ label = "Power Button";
+ linux,code = <KEY_POWER>;
+ interrupts = <GIC_SPI 120 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+ };
+ };
+};
+
+#ifdef TPM2_ENABLE
+&tpm {
+ status = "okay";
+};
+#endif
+
+&gpio {
+ gpio-line-names = "DSW3-PIN1", "DSW3-PIN2", "DSW3-PIN3", "DSW3-PIN4",
+ "DSW3-PIN5", "DSW3-PIN6", "DSW3-PIN7", "DSW3-PIN8",
+ "PSIN#", "PWROFF#", "GPIO-A", "GPIO-B",
+ "GPIO-C", "GPIO-D", "PCIE1EXTINT", "PCIE0EXTINT",
+ "PHY2-INT#", "PHY1-INT#", "GPIO-E", "GPIO-F",
+ "GPIO-G", "GPIO-H", "GPIO-I", "GPIO-J",
+ "GPIO-K", "GPIO-L", "PEC-PD26", "PEC-PD27",
+ "PEC-PD28", "PEC-PD29", "PEC-PD30", "PEC-PD31";
+};
+
+&netsec {
+ phy-mode = "rgmii-id";
+};
+
+&mdio_netsec {
+ phy_netsec: ethernet-phy@7 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <7>;
+ };
+};
new file mode 100644
@@ -0,0 +1,595 @@
+/** @file
+ * Copyright (c) 2017 - 2018, Linaro Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-2-Clause-Patent
+ */
+
+/* These are added for U-Boot to avoid compilation error */
+#define PcdNetsecEepromBase 0x08080000
+#define FixedPcdGet32(n) n
+
+#define GIC_SPI 0
+#define GIC_PPI 1
+
+#define IRQ_TYPE_NONE 0
+#define IRQ_TYPE_EDGE_RISING 1
+#define IRQ_TYPE_EDGE_FALLING 2
+#define IRQ_TYPE_EDGE_BOTH (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)
+#define IRQ_TYPE_LEVEL_HIGH 4
+#define IRQ_TYPE_LEVEL_LOW 8
+
+#define GPIO_ACTIVE_HIGH 0
+#define GPIO_ACTIVE_LOW 1
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&gic>;
+
+ aliases {
+ serial0 = &soc_uart0;
+ serial1 = &fuart;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ CPU0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x1>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU2: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x100>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU3: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x101>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU4: cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x200>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU5: cpu@201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x201>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU6: cpu@300 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x300>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU7: cpu@301 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x301>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU8: cpu@400 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x400>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU9: cpu@401 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x401>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU10: cpu@500 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x500>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU11: cpu@501 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x501>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU12: cpu@600 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x600>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU13: cpu@601 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x601>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU14: cpu@700 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x700>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU15: cpu@701 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x701>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU16: cpu@800 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x800>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU17: cpu@801 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x801>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU18: cpu@900 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x900>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU19: cpu@901 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x901>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU20: cpu@a00 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0xa00>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU21: cpu@a01 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0xa01>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU22: cpu@b00 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0xb00>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+ CPU23: cpu@b01 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0xb01>;
+ enable-method = "psci";
+ cpu-idle-states = <&CPU_SLEEP_0 &CLUSTER_SLEEP_0>;
+ };
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&CPU0>;
+ };
+ core1 {
+ cpu = <&CPU1>;
+ };
+ };
+ cluster1 {
+ core0 {
+ cpu = <&CPU2>;
+ };
+ core1 {
+ cpu = <&CPU3>;
+ };
+ };
+ cluster2 {
+ core0 {
+ cpu = <&CPU4>;
+ };
+ core1 {
+ cpu = <&CPU5>;
+ };
+ };
+ cluster3 {
+ core0 {
+ cpu = <&CPU6>;
+ };
+ core1 {
+ cpu = <&CPU7>;
+ };
+ };
+ cluster4 {
+ core0 {
+ cpu = <&CPU8>;
+ };
+ core1 {
+ cpu = <&CPU9>;
+ };
+ };
+ cluster5 {
+ core0 {
+ cpu = <&CPU10>;
+ };
+ core1 {
+ cpu = <&CPU11>;
+ };
+ };
+ cluster6 {
+ core0 {
+ cpu = <&CPU12>;
+ };
+ core1 {
+ cpu = <&CPU13>;
+ };
+ };
+ cluster7 {
+ core0 {
+ cpu = <&CPU14>;
+ };
+ core1 {
+ cpu = <&CPU15>;
+ };
+ };
+ cluster8 {
+ core0 {
+ cpu = <&CPU16>;
+ };
+ core1 {
+ cpu = <&CPU17>;
+ };
+ };
+ cluster9 {
+ core0 {
+ cpu = <&CPU18>;
+ };
+ core1 {
+ cpu = <&CPU19>;
+ };
+ };
+ cluster10 {
+ core0 {
+ cpu = <&CPU20>;
+ };
+ core1 {
+ cpu = <&CPU21>;
+ };
+ };
+ cluster11 {
+ core0 {
+ cpu = <&CPU22>;
+ };
+ core1 {
+ cpu = <&CPU23>;
+ };
+ };
+ };
+ };
+
+ idle-states {
+ entry-method = "arm,psci";
+
+ CPU_SLEEP_0: cpu-sleep-0 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010000>;
+ entry-latency-us = <300>;
+ exit-latency-us = <1200>;
+ min-residency-us = <2000>;
+ local-timer-stop;
+ };
+
+ CLUSTER_SLEEP_0: cluster-sleep-0 {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x1010000>;
+ entry-latency-us = <400>;
+ exit-latency-us = <1200>;
+ min-residency-us = <2500>;
+ local-timer-stop;
+ };
+ };
+
+ gic: interrupt-controller@30000000 {
+ compatible = "arm,gic-v3";
+ reg = <0x0 0x30000000 0x0 0x10000>, // GICD
+ <0x0 0x30400000 0x0 0x300000>, // GICR
+ <0x0 0x2c000000 0x0 0x2000>, // GICC
+ <0x0 0x2c010000 0x0 0x1000>, // GICH
+ <0x0 0x2c020000 0x0 0x10000>; // GICV
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+
+ its: gic-its@30020000 {
+ compatible = "arm,gic-v3-its";
+ reg = <0x0 0x30020000 0x0 0x20000>;
+ #msi-cells = <1>;
+ msi-controller;
+ socionext,synquacer-pre-its = <0x58000000 0x200000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, // secure
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, // non-secure
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, // virtual
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; // HYP
+ };
+
+ mmio-timer@2a810000 {
+ compatible = "arm,armv7-timer-mem";
+ reg = <0x0 0x2a810000 0x0 0x10000>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ frame@2a830000 {
+ frame-number = <0>;
+ interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x0 0x2a830000 0x0 0x10000>;
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ clk_uart: refclk62500khz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <62500000>;
+ clock-output-names = "uartclk";
+ };
+
+ clk_apb: refclk100mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "apb_pclk";
+ };
+
+ soc_uart0: uart@2a400000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0x2a400000 0x0 0x1000>;
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_uart>, <&clk_apb>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ fuart: uart@51040000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x0 0x51040000 0x0 0x1000>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_uart>, <&clk_apb>;
+ clock-names = "baudclk", "apb_pclk";
+ reg-io-width = <4>;
+ reg-shift = <2>;
+ };
+
+ clk_netsec: refclk250mhz {
+ compatible = "fixed-clock";
+ clock-frequency = <250000000>;
+ #clock-cells = <0>;
+ };
+
+ netsec: ethernet@522d0000 {
+ compatible = "socionext,synquacer-netsec";
+ reg = <0 0x522d0000 0x0 0x10000>,
+ <0 FixedPcdGet32 (PcdNetsecEepromBase) 0x0 0x10000>;
+ interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_netsec>;
+ clock-names = "phy_ref_clk";
+ max-speed = <1000>;
+ max-frame-size = <9000>;
+ phy-handle = <&phy_netsec>;
+ dma-coherent;
+
+ mdio_netsec: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+
+ smmu: iommu@582c0000 {
+ compatible = "arm,mmu-500", "arm,smmu-v2";
+ reg = <0x0 0x582c0000 0x0 0x10000>;
+ #global-interrupts = <1>;
+ interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
+ #iommu-cells = <1>;
+ status = "disabled";
+ };
+
+ pcie0: pcie@60000000 {
+ compatible = "socionext,synquacer-pcie-ecam", "snps,dw-pcie-ecam";
+ device_type = "pci";
+ reg = <0x0 0x60000000 0x0 0x7f00000>;
+ bus-range = <0x0 0x7e>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x1000000 0x00 0x00000000 0x00 0x67f00000 0x0 0x00010000>,
+ <0x2000000 0x00 0x68000000 0x00 0x68000000 0x0 0x08000000>,
+ <0x3000000 0x3e 0x00000000 0x3e 0x00000000 0x1 0x00000000>;
+
+ #interrupt-cells = <0x1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &gic 0x0 0x0 GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+
+ msi-map = <0x000 &its 0x0 0x7f00>;
+ dma-coherent;
+ status = "disabled";
+ };
+
+ pcie1: pcie@70000000 {
+ compatible = "socionext,synquacer-pcie-ecam", "snps,dw-pcie-ecam";
+ device_type = "pci";
+ reg = <0x0 0x70000000 0x0 0x7f00000>;
+ bus-range = <0x0 0x7e>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x1000000 0x00 0x00000000 0x00 0x77f00000 0x0 0x00010000>,
+ <0x2000000 0x00 0x78000000 0x00 0x78000000 0x0 0x08000000>,
+ <0x3000000 0x3f 0x00000000 0x3f 0x00000000 0x1 0x00000000>;
+
+ #interrupt-cells = <0x1>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x0>;
+ interrupt-map = <0x0 0x0 0x0 0x0 &gic 0x0 0x0 GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+
+ msi-map = <0x0 &its 0x10000 0x7f00>;
+ dma-coherent;
+ status = "disabled";
+ };
+
+ gpio: gpio@51000000 {
+ compatible = "socionext,synquacer-gpio", "fujitsu,mb86s70-gpio";
+ reg = <0x0 0x51000000 0x0 0x100>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clk_apb>;
+ base = <0>;
+ };
+
+ exiu: interrupt-controller@510c0000 {
+ compatible = "socionext,synquacer-exiu";
+ reg = <0x0 0x510c0000 0x0 0x20>;
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ #interrupt-cells = <3>;
+ socionext,spi-base = <112>;
+ };
+
+ clk_alw_b_0: bclk200 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ clock-output-names = "sd_bclk";
+ };
+
+ clk_alw_c_0: sd4clk800 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <800000000>;
+ clock-output-names = "sd_sd4clk";
+ };
+
+ sdhci: sdhci@52300000 {
+ compatible = "socionext,synquacer-sdhci", "fujitsu,mb86s70-sdhci-3.0";
+ reg = <0 0x52300000 0x0 0x1000>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ fujitsu,cmd-dat-delay-select;
+ clocks = <&clk_alw_c_0 &clk_alw_b_0>;
+ clock-names = "core", "iface";
+ dma-coherent;
+ status = "disabled";
+ };
+
+ clk_alw_1_8: spi_ihclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ clock-output-names = "iHCLK";
+ };
+
+ spi: spi@54810000 {
+ compatible = "socionext,synquacer-spi";
+ reg = <0x0 0x54810000 0x0 0x1000>;
+ interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_alw_1_8>;
+ clock-names = "iHCLK";
+ socionext,use-rtm;
+ socionext,set-aces;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ clk_i2c: i2c_pclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <62500000>;
+ clock-output-names = "pclk";
+ };
+
+ i2c: i2c@51210000 {
+ compatible = "socionext,synquacer-i2c";
+ reg = <0x0 0x51210000 0x0 0x1000>;
+ interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_i2c>;
+ clock-names = "pclk";
+ clock-frequency = <400000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ tpm: tpm_tis@10000000 {
+ compatible = "socionext,synquacer-tpm-mmio";
+ reg = <0x0 0x10000000 0x0 0x5000>;
+ status = "disabled";
+ };
+
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ status = "disabled";
+ };
+ };
+};
+
+#include "synquacer-sc2a11-caches.dtsi"
Add device trees for 96boards EE DeveloperBox and basement SynQuacer SoC dtsi. These files are imported from EDK2 commit 83d38b0b4c0f240d4488c600bbe87cea391f3922 as-is (except for the changes #include path and some macros). And add U-Boot specific changes in synquacer-sc2a11-developerbox-u-boot.dtsi Signed-off-by: Masami Hiramatsu <masami.hiramatsu@linaro.org> --- Changes in v4: - Add i2c0 and RTC node. Changes in v3: - Use generic nor flash instead of specific mx25u51245g. (chip parameters will be searched by the register value) Changes in v2: - Add reference commit id of original EDK2 to the comment - Just copy the EDK2 dts files as-is (change #include path) - Split out the u-boot specific changes in -u-boot.dtsi. - Removed unneeded spi-nor flash partition information. --- arch/arm/dts/Makefile | 2 arch/arm/dts/synquacer-sc2a11-caches.dtsi | 73 ++ .../dts/synquacer-sc2a11-developerbox-u-boot.dtsi | 75 +++ arch/arm/dts/synquacer-sc2a11-developerbox.dts | 56 ++ arch/arm/dts/synquacer-sc2a11.dtsi | 595 ++++++++++++++++++++ 5 files changed, 801 insertions(+) create mode 100644 arch/arm/dts/synquacer-sc2a11-caches.dtsi create mode 100644 arch/arm/dts/synquacer-sc2a11-developerbox-u-boot.dtsi create mode 100644 arch/arm/dts/synquacer-sc2a11-developerbox.dts create mode 100644 arch/arm/dts/synquacer-sc2a11.dtsi