@@ -154,6 +154,7 @@ static int xrx200_close(struct net_device *net_dev)
static int xrx200_alloc_skb(struct xrx200_chan *ch)
{
+ dma_addr_t mapping;
int ret = 0;
ch->skb[ch->dma.desc] = netdev_alloc_skb_ip_align(ch->priv->net_dev,
@@ -163,16 +164,17 @@ static int xrx200_alloc_skb(struct xrx200_chan *ch)
goto skip;
}
- ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(ch->priv->dev,
- ch->skb[ch->dma.desc]->data, XRX200_DMA_DATA_LEN,
- DMA_FROM_DEVICE);
- if (unlikely(dma_mapping_error(ch->priv->dev,
- ch->dma.desc_base[ch->dma.desc].addr))) {
+ mapping = dma_map_single(ch->priv->dev, ch->skb[ch->dma.desc]->data,
+ XRX200_DMA_DATA_LEN, DMA_FROM_DEVICE);
+ if (unlikely(dma_mapping_error(ch->priv->dev, mapping))) {
dev_kfree_skb_any(ch->skb[ch->dma.desc]);
ret = -ENOMEM;
goto skip;
}
+ ch->dma.desc_base[ch->dma.desc].addr = mapping;
+ /* Make sure the address is written before we give it to HW */
+ wmb();
skip:
ch->dma.desc_base[ch->dma.desc].ctl =
LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
@@ -196,6 +198,8 @@ static int xrx200_hw_receive(struct xrx200_chan *ch)
ch->dma.desc %= LTQ_DESC_NUM;
if (ret) {
+ ch->skb[ch->dma.desc] = skb;
+ net_dev->stats.rx_dropped++;
netdev_err(net_dev, "failed to allocate new rx buffer\n");
return ret;
}
In a situation where memory allocation or dma mapping fails, an invalid address is programmed into the descriptor. This can lead to memory corruption. If the memory allocation fails, DMA should reuse the previous skb and mapping and drop the packet. This patch also increments rx drop counter. Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> --- drivers/net/ethernet/lantiq_xrx200.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)