diff mbox

[v5,4/4] target-arm: Add AArch32 guest support to KVM64

Message ID 1423709948-7662-5-git-send-email-greg.bellows@linaro.org
State New
Headers show

Commit Message

Greg Bellows Feb. 12, 2015, 2:59 a.m. UTC
Add 32-bit to/from 64-bit register synchronization on register gets and puts.
Set EL1_32BIT feature flag passed to KVM

Signed-off-by: Greg Bellows <greg.bellows@linaro.org>

---

v4 -> v5
- Fix target check

v3 -> v4
- Add check that to make sure KVM64 is only being used on AArch64 family of
  machines.
- Relocate register sync to follow register fetches.
- Refresh env->aarch64 prior to use.

v2 -> v3
- Conditionalize sync of 32-bit and 64-bit registers
---
 target-arm/kvm64.c | 36 +++++++++++++++++++++++++++++++++---
 1 file changed, 33 insertions(+), 3 deletions(-)

Comments

Peter Maydell Feb. 12, 2015, 3:45 a.m. UTC | #1
On 12 February 2015 at 02:59, Greg Bellows <greg.bellows@linaro.org> wrote:
> Add 32-bit to/from 64-bit register synchronization on register gets and puts.
> Set EL1_32BIT feature flag passed to KVM
>
> Signed-off-by: Greg Bellows <greg.bellows@linaro.org>

Reviewed-by: Peter Maydell <peter.maydell@linaro.org>

thanks
-- PMM
diff mbox

Patch

diff --git a/target-arm/kvm64.c b/target-arm/kvm64.c
index 033babf..48fdb87 100644
--- a/target-arm/kvm64.c
+++ b/target-arm/kvm64.c
@@ -82,7 +82,7 @@  int kvm_arch_init_vcpu(CPUState *cs)
     ARMCPU *cpu = ARM_CPU(cs);
 
     if (cpu->kvm_target == QEMU_KVM_ARM_TARGET_NONE ||
-        !arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) {
+        !object_dynamic_cast(cpu, TYPE_AARCH64_CPU)) {
         fprintf(stderr, "KVM is not supported for this guest CPU type\n");
         return -EINVAL;
     }
@@ -96,6 +96,9 @@  int kvm_arch_init_vcpu(CPUState *cs)
         cpu->psci_version = 2;
         cpu->kvm_init_features[0] |= 1 << KVM_ARM_VCPU_PSCI_0_2;
     }
+    if (!arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) {
+        cpu->kvm_init_features[0] |= 1 << KVM_ARM_VCPU_EL1_32BIT;
+    }
 
     /* Do KVM_ARM_VCPU_INIT ioctl */
     ret = kvm_arm_vcpu_init(cs);
@@ -133,6 +136,13 @@  int kvm_arch_put_registers(CPUState *cs, int level)
     ARMCPU *cpu = ARM_CPU(cs);
     CPUARMState *env = &cpu->env;
 
+    /* If we are in AArch32 mode then we need to copy the AArch32 regs to the
+     * AArch64 registers before pushing them out to 64-bit KVM.
+     */
+    if (!is_a64(env)) {
+        aarch64_sync_32_to_64(env);
+    }
+
     for (i = 0; i < 31; i++) {
         reg.id = AARCH64_CORE_REG(regs.regs[i]);
         reg.addr = (uintptr_t) &env->xregs[i];
@@ -162,7 +172,11 @@  int kvm_arch_put_registers(CPUState *cs, int level)
     }
 
     /* Note that KVM thinks pstate is 64 bit but we use a uint32_t */
-    val = pstate_read(env);
+    if (is_a64(env)) {
+        val = pstate_read(env);
+    } else {
+        val = cpsr_read(env);
+    }
     reg.id = AARCH64_CORE_REG(regs.pstate);
     reg.addr = (uintptr_t) &val;
     ret = kvm_vcpu_ioctl(cs, KVM_SET_ONE_REG, &reg);
@@ -242,7 +256,14 @@  int kvm_arch_get_registers(CPUState *cs)
     if (ret) {
         return ret;
     }
-    pstate_write(env, val);
+
+    env->aarch64 = ((val & PSTATE_nRW) == 0);
+    if (is_a64(env)) {
+        pstate_write(env, val);
+    } else {
+        env->uncached_cpsr = val & CPSR_M;
+        cpsr_write(env, val, 0xffffffff);
+    }
 
     /* KVM puts SP_EL0 in regs.sp and SP_EL1 in regs.sp_el1. On the
      * QEMU side we keep the current SP in xregs[31] as well.
@@ -256,6 +277,15 @@  int kvm_arch_get_registers(CPUState *cs)
         return ret;
     }
 
+    /* If we are in AArch32 mode then we need to sync the AArch32 regs with the
+     * incoming AArch64 regs received from 64-bit KVM.
+     * We must perform this after all of the registers have been acquired from
+     * the kernel.
+     */
+    if (!is_a64(env)) {
+        aarch64_sync_64_to_32(env);
+    }
+
     reg.id = AARCH64_CORE_REG(elr_el1);
     reg.addr = (uintptr_t) &env->elr_el[1];
     ret = kvm_vcpu_ioctl(cs, KVM_GET_ONE_REG, &reg);