diff mbox series

Add supprt for SUNIX SDC serial port driver

Message ID 20210528092240.5896-1-saumah@gmail.com
State New
Headers show
Series Add supprt for SUNIX SDC serial port driver | expand

Commit Message

Moriis Ku May 28, 2021, 9:22 a.m. UTC
From: Morris Ku <saumah@gmail.com>

SUNIX SDC serial port driver.

Cc: Jason Lee <jason_lee@sunix.com>
Cc: Taian Chen <taian.chen@sunix.com>
Signed-off-by: Morris Ku <saumah@gmail.com>
---
 Kconfig  | 6 ++++++
 Makefile | 1 +
 2 files changed, 7 insertions(+)

Comments

Greg Kroah-Hartman May 28, 2021, 9:27 a.m. UTC | #1
On Fri, May 28, 2021 at 05:22:40PM +0800, Moriis Ku wrote:
> From: Morris Ku <saumah@gmail.com>
> 
> SUNIX SDC serial port driver.
> 
> Cc: Jason Lee <jason_lee@sunix.com>
> Cc: Taian Chen <taian.chen@sunix.com>
> Signed-off-by: Morris Ku <saumah@gmail.com>
> ---
>  Kconfig  | 6 ++++++
>  Makefile | 1 +
>  2 files changed, 7 insertions(+)
> 

Hi,

This is the friendly patch-bot of Greg Kroah-Hartman.  You have sent him
a patch that has triggered this response.  He used to manually respond
to these common problems, but in order to save his sanity (he kept
writing the same thing over and over, yet to different people), I was
created.  Hopefully you will not take offence and will fix the problem
in your patch and resubmit it so that it can be accepted into the Linux
kernel tree.

You are receiving this message because of the following common error(s)
as indicated below:

- You sent multiple patches, yet no indication of which ones should be
  applied in which order.  Greg could just guess, but if you are
  receiving this email, he guessed wrong and the patches didn't apply.
  Please read the section entitled "The canonical patch format" in the
  kernel file, Documentation/SubmittingPatches for a description of how
  to do this so that Greg has a chance to apply these correctly.

- You did not specify a description of why the patch is needed, or
  possibly, any description at all, in the email body.  Please read the
  section entitled "The canonical patch format" in the kernel file,
  Documentation/SubmittingPatches for what is needed in order to
  properly describe the change.

- You did not write a descriptive Subject: for the patch, allowing Greg,
  and everyone else, to know what this patch is all about.  Please read
  the section entitled "The canonical patch format" in the kernel file,
  Documentation/SubmittingPatches for what a proper Subject: line should
  look like.

- This looks like a new version of a previously submitted patch, but you
  did not list below the --- line any changes from the previous version.
  Please read the section entitled "The canonical patch format" in the
  kernel file, Documentation/SubmittingPatches for what needs to be done
  here to properly describe this.

If you wish to discuss this problem further, or you have questions about
how to resolve this issue, please feel free to respond to this email and
Greg will reply once he has dug out from the pending patches received
from other developers.

thanks,

greg k-h's patch email bot
diff mbox series

Patch

diff --git a/drivers/tty/serial/8250/Kconfig b//drivers/tty/serial/8250/Kconfig
index d6d408c..3fcd4d3 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -479,6 +479,12 @@  config SERIAL_8250_PXA
 	  applicable to both devicetree and legacy boards, and early console is
 	  part of its support.
 
+config SERIAL_8250_SDC
+	tristate "SUNIX SDC serial port support"
+	depends on SERIAL_8250 && MFD_SUNIX_SDC
+	help
+	  Support for SUNIX SDC serial port
+
 config SERIAL_OF_PLATFORM
 	tristate "Devicetree based probing for 8250 ports"
 	depends on SERIAL_8250 && OF
diff --git a/Makefile b/Makefile
index 53d483d..df5cbb5 100644
--- a/Makefile
+++ b/Makefile
@@ -37,6 +37,7 @@  obj-$(CONFIG_SERIAL_8250_LPSS)		+= 8250_lpss.o
 obj-$(CONFIG_SERIAL_8250_MID)		+= 8250_mid.o
 obj-$(CONFIG_SERIAL_8250_PXA)		+= 8250_pxa.o
 obj-$(CONFIG_SERIAL_OF_PLATFORM)	+= 8250_of.o
+obj-$(CONFIG_SERIAL_8250_SDC)		+= 8250_sdc.o
 
 
 CFLAGS_8250_ingenic.o += -I$(srctree)/scripts/dtc/libfdt