diff mbox series

[v2,2/2] media: i2c: adv7180: fix adv7280 BT.656-4 compatibility

Message ID 20210604212217.70518-2-festevam@gmail.com
State New
Headers show
Series [v2,1/2] dt-bindings: adv7180: Introduce 'adv,force-bt656-4' property | expand

Commit Message

Fabio Estevam June 4, 2021, 9:22 p.m. UTC
From: Matthew Michilot <matthew.michilot@gmail.com>

Captured video would be out of sync when using the adv7280 with
the BT.656-4 protocol. Certain registers (0x04, 0x31, 0xE6) had to
be configured properly to ensure BT.656-4 compatibility.

An error in the adv7280 reference manual suggested that EAV/SAV mode
was enabled by default, however upon inspecting register 0x31, it was
determined to be disabled by default.

Signed-off-by: Matthew Michilot <matthew.michilot@gmail.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
[fabio: Introduce "adv,force-bt656-4" to not affect the existing users]
Signed-off-by: Fabio Estevam <festevam@gmail.com>
---
Changes since v1:
- Remove the part number from the property name (Rob)

 drivers/media/i2c/adv7180.c | 30 ++++++++++++++++++++++++++----
 1 file changed, 26 insertions(+), 4 deletions(-)

Comments

Tim Harvey July 1, 2021, 6:28 p.m. UTC | #1
On Fri, Jun 4, 2021 at 2:22 PM Fabio Estevam <festevam@gmail.com> wrote:
>
> From: Matthew Michilot <matthew.michilot@gmail.com>
>
> Captured video would be out of sync when using the adv7280 with
> the BT.656-4 protocol. Certain registers (0x04, 0x31, 0xE6) had to
> be configured properly to ensure BT.656-4 compatibility.
>
> An error in the adv7280 reference manual suggested that EAV/SAV mode
> was enabled by default, however upon inspecting register 0x31, it was
> determined to be disabled by default.
>
> Signed-off-by: Matthew Michilot <matthew.michilot@gmail.com>
> Reviewed-by: Tim Harvey <tharvey@gateworks.com>
> [fabio: Introduce "adv,force-bt656-4" to not affect the existing users]
> Signed-off-by: Fabio Estevam <festevam@gmail.com>
> ---
> Changes since v1:
> - Remove the part number from the property name (Rob)
>
>  drivers/media/i2c/adv7180.c | 30 ++++++++++++++++++++++++++----
>  1 file changed, 26 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c
> index 44bb6fe85644..a532df813d74 100644
> --- a/drivers/media/i2c/adv7180.c
> +++ b/drivers/media/i2c/adv7180.c
> @@ -94,6 +94,7 @@
>  #define ADV7180_REG_SHAP_FILTER_CTL_1  0x0017
>  #define ADV7180_REG_CTRL_2             0x001d
>  #define ADV7180_REG_VSYNC_FIELD_CTL_1  0x0031
> +#define ADV7180_VSYNC_FIELD_CTL_1_NEWAV 0x12
>  #define ADV7180_REG_MANUAL_WIN_CTL_1   0x003d
>  #define ADV7180_REG_MANUAL_WIN_CTL_2   0x003e
>  #define ADV7180_REG_MANUAL_WIN_CTL_3   0x003f
> @@ -216,6 +217,7 @@ struct adv7180_state {
>         struct i2c_client       *vpp_client;
>         const struct adv7180_chip_info *chip_info;
>         enum v4l2_field         field;
> +       bool                    force_bt656_4;
>  };
>  #define to_adv7180_sd(_ctrl) (&container_of(_ctrl->handler,            \
>                                             struct adv7180_state,       \
> @@ -963,10 +965,26 @@ static int adv7182_init(struct adv7180_state *state)
>                 adv7180_write(state, ADV7180_REG_EXTENDED_OUTPUT_CONTROL, 0x57);
>                 adv7180_write(state, ADV7180_REG_CTRL_2, 0xc0);
>         } else {
> -               if (state->chip_info->flags & ADV7180_FLAG_V2)
> -                       adv7180_write(state,
> -                                     ADV7180_REG_EXTENDED_OUTPUT_CONTROL,
> -                                     0x17);
> +               if (state->chip_info->flags & ADV7180_FLAG_V2) {
> +                       if (state->force_bt656_4) {
> +                               /* ITU-R BT.656-4 compatible */
> +                               adv7180_write(state,
> +                                             ADV7180_REG_EXTENDED_OUTPUT_CONTROL,
> +                                             ADV7180_EXTENDED_OUTPUT_CONTROL_NTSCDIS);
> +                               /* Manually set NEWAVMODE */
> +                               adv7180_write(state,
> +                                             ADV7180_REG_VSYNC_FIELD_CTL_1,
> +                                             ADV7180_VSYNC_FIELD_CTL_1_NEWAV);
> +                               /* Manually set V bit end position in NTSC mode */
> +                               adv7180_write(state,
> +                                            ADV7180_REG_NTSC_V_BIT_END,
> +                                            ADV7180_NTSC_V_BIT_END_MANUAL_NVEND);
> +                       } else {
> +                               adv7180_write(state,
> +                                             ADV7180_REG_EXTENDED_OUTPUT_CONTROL,
> +                                             0x17);
> +                       }
> +               }
>                 else
>                         adv7180_write(state,
>                                       ADV7180_REG_EXTENDED_OUTPUT_CONTROL,
> @@ -1314,6 +1332,7 @@ static int init_device(struct adv7180_state *state)
>  static int adv7180_probe(struct i2c_client *client,
>                          const struct i2c_device_id *id)
>  {
> +       struct device_node *np = client->dev.of_node;
>         struct adv7180_state *state;
>         struct v4l2_subdev *sd;
>         int ret;
> @@ -1338,6 +1357,9 @@ static int adv7180_probe(struct i2c_client *client,
>                 return ret;
>         }
>
> +       if (of_property_read_bool(np, "adv,force-bt656-4"))
> +               state->force_bt656_4 = true;
> +
>         if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) {
>                 state->csi_client = i2c_new_dummy_device(client->adapter,
>                                 ADV7180_DEFAULT_CSI_I2C_ADDR);
> --
> 2.25.1

Fabio,

Thanks for the submission. This does resolve NTSC capture on a
GW5410-G with an adv7280.

Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>

Best regards,

Tim
Fabio Estevam July 12, 2021, 3:59 p.m. UTC | #2
Hi Hans,

On Thu, Jul 1, 2021 at 3:29 PM Tim Harvey <tharvey@gateworks.com> wrote:

> Fabio,

>

> Thanks for the submission. This does resolve NTSC capture on a

> GW5410-G with an adv7280.

>

> Reviewed-by: Tim Harvey <tharvey@gateworks.com>

> Tested-by: Tim Harvey <tharvey@gateworks.com>


Do you think this series could be applied?

Thanks,

Fabio Estevam
Fabio Estevam July 19, 2021, 12:51 p.m. UTC | #3
On Mon, Jul 12, 2021 at 12:59 PM Fabio Estevam <festevam@gmail.com> wrote:
>

> Hi Hans,

>

> On Thu, Jul 1, 2021 at 3:29 PM Tim Harvey <tharvey@gateworks.com> wrote:

>

> > Fabio,

> >

> > Thanks for the submission. This does resolve NTSC capture on a

> > GW5410-G with an adv7280.

> >

> > Reviewed-by: Tim Harvey <tharvey@gateworks.com>

> > Tested-by: Tim Harvey <tharvey@gateworks.com>

>

> Do you think this series could be applied?


A gentle ping.

Thanks
diff mbox series

Patch

diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c
index 44bb6fe85644..a532df813d74 100644
--- a/drivers/media/i2c/adv7180.c
+++ b/drivers/media/i2c/adv7180.c
@@ -94,6 +94,7 @@ 
 #define ADV7180_REG_SHAP_FILTER_CTL_1	0x0017
 #define ADV7180_REG_CTRL_2		0x001d
 #define ADV7180_REG_VSYNC_FIELD_CTL_1	0x0031
+#define ADV7180_VSYNC_FIELD_CTL_1_NEWAV 0x12
 #define ADV7180_REG_MANUAL_WIN_CTL_1	0x003d
 #define ADV7180_REG_MANUAL_WIN_CTL_2	0x003e
 #define ADV7180_REG_MANUAL_WIN_CTL_3	0x003f
@@ -216,6 +217,7 @@  struct adv7180_state {
 	struct i2c_client	*vpp_client;
 	const struct adv7180_chip_info *chip_info;
 	enum v4l2_field		field;
+	bool			force_bt656_4;
 };
 #define to_adv7180_sd(_ctrl) (&container_of(_ctrl->handler,		\
 					    struct adv7180_state,	\
@@ -963,10 +965,26 @@  static int adv7182_init(struct adv7180_state *state)
 		adv7180_write(state, ADV7180_REG_EXTENDED_OUTPUT_CONTROL, 0x57);
 		adv7180_write(state, ADV7180_REG_CTRL_2, 0xc0);
 	} else {
-		if (state->chip_info->flags & ADV7180_FLAG_V2)
-			adv7180_write(state,
-				      ADV7180_REG_EXTENDED_OUTPUT_CONTROL,
-				      0x17);
+		if (state->chip_info->flags & ADV7180_FLAG_V2) {
+			if (state->force_bt656_4) {
+				/* ITU-R BT.656-4 compatible */
+				adv7180_write(state,
+					      ADV7180_REG_EXTENDED_OUTPUT_CONTROL,
+					      ADV7180_EXTENDED_OUTPUT_CONTROL_NTSCDIS);
+				/* Manually set NEWAVMODE */
+				adv7180_write(state,
+					      ADV7180_REG_VSYNC_FIELD_CTL_1,
+					      ADV7180_VSYNC_FIELD_CTL_1_NEWAV);
+				/* Manually set V bit end position in NTSC mode */
+				adv7180_write(state,
+					     ADV7180_REG_NTSC_V_BIT_END,
+					     ADV7180_NTSC_V_BIT_END_MANUAL_NVEND);
+			} else {
+				adv7180_write(state,
+					      ADV7180_REG_EXTENDED_OUTPUT_CONTROL,
+					      0x17);
+			}
+		}
 		else
 			adv7180_write(state,
 				      ADV7180_REG_EXTENDED_OUTPUT_CONTROL,
@@ -1314,6 +1332,7 @@  static int init_device(struct adv7180_state *state)
 static int adv7180_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
+	struct device_node *np = client->dev.of_node;
 	struct adv7180_state *state;
 	struct v4l2_subdev *sd;
 	int ret;
@@ -1338,6 +1357,9 @@  static int adv7180_probe(struct i2c_client *client,
 		return ret;
 	}
 
+	if (of_property_read_bool(np, "adv,force-bt656-4"))
+		state->force_bt656_4 = true;
+
 	if (state->chip_info->flags & ADV7180_FLAG_MIPI_CSI2) {
 		state->csi_client = i2c_new_dummy_device(client->adapter,
 				ADV7180_DEFAULT_CSI_I2C_ADDR);