| Message ID | 20210608052010.15656-1-a-govindraju@ti.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v2] dt-bindings: spi: omap-spi: Convert to json-schema | expand |
On Tue, Jun 08, 2021 at 10:50:09AM +0530, Aswath Govindraju wrote: > Convert omap-spi dt-binding documentation from txt to yaml format. > > Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> > --- > > changes since v1: > - split the series according to their respective trees > > link to v1: > https://lore.kernel.org/patchwork/project/lkml/list/?series=502255 > > .../devicetree/bindings/spi/omap-spi.txt | 48 ------- > .../devicetree/bindings/spi/omap-spi.yaml | 126 ++++++++++++++++++ > 2 files changed, 126 insertions(+), 48 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/spi/omap-spi.txt > create mode 100644 Documentation/devicetree/bindings/spi/omap-spi.yaml > > diff --git a/Documentation/devicetree/bindings/spi/omap-spi.txt b/Documentation/devicetree/bindings/spi/omap-spi.txt > deleted file mode 100644 > index 487208c256c0..000000000000 > --- a/Documentation/devicetree/bindings/spi/omap-spi.txt > +++ /dev/null > @@ -1,48 +0,0 @@ > -OMAP2+ McSPI device > - > -Required properties: > -- compatible : > - - "ti,am654-mcspi" for AM654. > - - "ti,omap2-mcspi" for OMAP2 & OMAP3. > - - "ti,omap4-mcspi" for OMAP4+. > -- ti,spi-num-cs : Number of chipselect supported by the instance. > -- ti,hwmods: Name of the hwmod associated to the McSPI > -- ti,pindir-d0-out-d1-in: Select the D0 pin as output and D1 as > - input. The default is D0 as input and > - D1 as output. > - > -Optional properties: > -- dmas: List of DMA specifiers with the controller specific format > - as described in the generic DMA client binding. A tx and rx > - specifier is required for each chip select. > -- dma-names: List of DMA request names. These strings correspond > - 1:1 with the DMA specifiers listed in dmas. The string naming > - is to be "rxN" and "txN" for RX and TX requests, > - respectively, where N equals the chip select number. > - > -Examples: > - > -[hwmod populated DMA resources] > - > -mcspi1: mcspi@1 { > - #address-cells = <1>; > - #size-cells = <0>; > - compatible = "ti,omap4-mcspi"; > - ti,hwmods = "mcspi1"; > - ti,spi-num-cs = <4>; > -}; > - > -[generic DMA request binding] > - > -mcspi1: mcspi@1 { > - #address-cells = <1>; > - #size-cells = <0>; > - compatible = "ti,omap4-mcspi"; > - ti,hwmods = "mcspi1"; > - ti,spi-num-cs = <2>; > - dmas = <&edma 42 > - &edma 43 > - &edma 44 > - &edma 45>; > - dma-names = "tx0", "rx0", "tx1", "rx1"; > -}; > diff --git a/Documentation/devicetree/bindings/spi/omap-spi.yaml b/Documentation/devicetree/bindings/spi/omap-spi.yaml > new file mode 100644 > index 000000000000..cd20704f2edc > --- /dev/null > +++ b/Documentation/devicetree/bindings/spi/omap-spi.yaml > @@ -0,0 +1,126 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/spi/omap-spi.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: SPI controller bindings for OMAP and K3 SoCs > + > +maintainers: > + - Mark Brown <broonie@kernel.org> A TI person here please. You need a ref to spi-controller.yaml > + > +properties: > + compatible: > + oneOf: > + - items: > + - enum: > + - ti,am654-mcspi > + - ti,am4372-mcspi > + - const: ti,omap4-mcspi > + - items: > + - enum: > + - ti,omap2-mcspi > + - ti,omap4-mcspi > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + '#address-cells': > + const: 1 > + > + '#size-cells': > + const: 0 Don't need these, covered by spi-controller.yaml. > + > + power-domains: > + maxItems: 1 > + > + ti,spi-num-cs: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: Number of chipselect supported by the instance. > + minimum: 1 > + maximum: 4 > + > + ti,hwmods: > + $ref: /schemas/types.yaml#/definitions/string > + description: > + Must be "mcspi<n>", n being the instance number (1-based). > + This property is applicable only on legacy platforms mainly omap2/3 > + and ti81xx and should not be used on other platforms. > + deprecated: true > + > + ti,pindir-d0-out-d1-in: > + description: > + Select the D0 pin as output and D1 as input. The default is D0 > + as input and D1 as output. > + type: boolean > + > + dmas: > + description: > + List of DMA specifiers with the controller specific format as > + described in the generic DMA client binding. A tx and rx > + specifier is required for each chip select. > + minItems: 1 > + maxItems: 8 > + > + dma-names: > + description: > + List of DMA request names. These strings correspond 1:1 with > + the DMA sepecifiers listed in dmas. The string names is to be > + "rxN" and "txN" for RX and TX requests, respectively. Where N > + is the chip select number. > + minItems: 1 > + maxItems: 8 > + > +patternProperties: > + "@[0-9a-f]+$": > + type: object > + description: > + Flash devices are defined as a sub-node of the spi controller Covered by spi-controller.yaml. > + > +required: > + - compatible > + - reg > + - interrupts > + > +additionalProperties: false > + > +if: > + properties: > + compatible: > + oneOf: > + - const: ti,omap2-mcspi > + - const: ti,omap4-mcspi > + > +then: > + properties: > + ti,hwmods: > + items: > + - pattern: "^mcspi([1-9])$" > + > +else: > + properties: > + ti,hwmods: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + #include <dt-bindings/interrupt-controller/arm-gic.h> > + #include <dt-bindings/soc/ti,sci_pm_domain.h> > + > + main_spi0: spi@2100000 { Drop unused labels. > + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; > + reg = <0x2100000 0x400>; > + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&k3_clks 137 1>; > + power-domains = <&k3_pds 137 TI_SCI_PD_EXCLUSIVE>; > + #address-cells = <1>; > + #size-cells = <0>; > + dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>; > + dma-names = "tx0", "rx0"; > + }; > -- > 2.17.1 > >
diff --git a/Documentation/devicetree/bindings/spi/omap-spi.txt b/Documentation/devicetree/bindings/spi/omap-spi.txt deleted file mode 100644 index 487208c256c0..000000000000 --- a/Documentation/devicetree/bindings/spi/omap-spi.txt +++ /dev/null @@ -1,48 +0,0 @@ -OMAP2+ McSPI device - -Required properties: -- compatible : - - "ti,am654-mcspi" for AM654. - - "ti,omap2-mcspi" for OMAP2 & OMAP3. - - "ti,omap4-mcspi" for OMAP4+. -- ti,spi-num-cs : Number of chipselect supported by the instance. -- ti,hwmods: Name of the hwmod associated to the McSPI -- ti,pindir-d0-out-d1-in: Select the D0 pin as output and D1 as - input. The default is D0 as input and - D1 as output. - -Optional properties: -- dmas: List of DMA specifiers with the controller specific format - as described in the generic DMA client binding. A tx and rx - specifier is required for each chip select. -- dma-names: List of DMA request names. These strings correspond - 1:1 with the DMA specifiers listed in dmas. The string naming - is to be "rxN" and "txN" for RX and TX requests, - respectively, where N equals the chip select number. - -Examples: - -[hwmod populated DMA resources] - -mcspi1: mcspi@1 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "ti,omap4-mcspi"; - ti,hwmods = "mcspi1"; - ti,spi-num-cs = <4>; -}; - -[generic DMA request binding] - -mcspi1: mcspi@1 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "ti,omap4-mcspi"; - ti,hwmods = "mcspi1"; - ti,spi-num-cs = <2>; - dmas = <&edma 42 - &edma 43 - &edma 44 - &edma 45>; - dma-names = "tx0", "rx0", "tx1", "rx1"; -}; diff --git a/Documentation/devicetree/bindings/spi/omap-spi.yaml b/Documentation/devicetree/bindings/spi/omap-spi.yaml new file mode 100644 index 000000000000..cd20704f2edc --- /dev/null +++ b/Documentation/devicetree/bindings/spi/omap-spi.yaml @@ -0,0 +1,126 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/omap-spi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SPI controller bindings for OMAP and K3 SoCs + +maintainers: + - Mark Brown <broonie@kernel.org> + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,am654-mcspi + - ti,am4372-mcspi + - const: ti,omap4-mcspi + - items: + - enum: + - ti,omap2-mcspi + - ti,omap4-mcspi + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + power-domains: + maxItems: 1 + + ti,spi-num-cs: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Number of chipselect supported by the instance. + minimum: 1 + maximum: 4 + + ti,hwmods: + $ref: /schemas/types.yaml#/definitions/string + description: + Must be "mcspi<n>", n being the instance number (1-based). + This property is applicable only on legacy platforms mainly omap2/3 + and ti81xx and should not be used on other platforms. + deprecated: true + + ti,pindir-d0-out-d1-in: + description: + Select the D0 pin as output and D1 as input. The default is D0 + as input and D1 as output. + type: boolean + + dmas: + description: + List of DMA specifiers with the controller specific format as + described in the generic DMA client binding. A tx and rx + specifier is required for each chip select. + minItems: 1 + maxItems: 8 + + dma-names: + description: + List of DMA request names. These strings correspond 1:1 with + the DMA sepecifiers listed in dmas. The string names is to be + "rxN" and "txN" for RX and TX requests, respectively. Where N + is the chip select number. + minItems: 1 + maxItems: 8 + +patternProperties: + "@[0-9a-f]+$": + type: object + description: + Flash devices are defined as a sub-node of the spi controller + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +if: + properties: + compatible: + oneOf: + - const: ti,omap2-mcspi + - const: ti,omap4-mcspi + +then: + properties: + ti,hwmods: + items: + - pattern: "^mcspi([1-9])$" + +else: + properties: + ti,hwmods: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/soc/ti,sci_pm_domain.h> + + main_spi0: spi@2100000 { + compatible = "ti,am654-mcspi","ti,omap4-mcspi"; + reg = <0x2100000 0x400>; + interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&k3_clks 137 1>; + power-domains = <&k3_pds 137 TI_SCI_PD_EXCLUSIVE>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>; + dma-names = "tx0", "rx0"; + };
Convert omap-spi dt-binding documentation from txt to yaml format. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> --- changes since v1: - split the series according to their respective trees link to v1: https://lore.kernel.org/patchwork/project/lkml/list/?series=502255 .../devicetree/bindings/spi/omap-spi.txt | 48 ------- .../devicetree/bindings/spi/omap-spi.yaml | 126 ++++++++++++++++++ 2 files changed, 126 insertions(+), 48 deletions(-) delete mode 100644 Documentation/devicetree/bindings/spi/omap-spi.txt create mode 100644 Documentation/devicetree/bindings/spi/omap-spi.yaml