diff mbox series

[v4,2/3] mac80211: Add support for beacon tx mode

Message ID 1623164855-15910-3-git-send-email-mkenna@codeaurora.org
State Superseded
Headers show
Series Add support to configure beacon tx mode | expand

Commit Message

Maharaja Kennadyrajan June 8, 2021, 3:07 p.m. UTC
Pass the beacon tx mode value from the nl80211/cfg80211
layer to the driver via ieee80211_ops and driver ops.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-00480-QCAHKSWPL_SILICONZ-1

Signed-off-by: Maharaja Kennadyrajan <mkenna@codeaurora.org>
---
 include/net/mac80211.h | 2 ++
 net/mac80211/cfg.c     | 2 ++
 2 files changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 445b66c..ff0e51e 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -631,6 +631,7 @@  struct ieee80211_fils_discovery {
  * @s1g: BSS is S1G BSS (affects Association Request format).
  * @beacon_tx_rate: The configured beacon transmit rate that needs to be passed
  *	to driver when rate control is offloaded to firmware.
+ * @beacon_tx_mode: Beacon Tx Mode setting.
  */
 struct ieee80211_bss_conf {
 	const u8 *bssid;
@@ -700,6 +701,7 @@  struct ieee80211_bss_conf {
 	u32 unsol_bcast_probe_resp_interval;
 	bool s1g;
 	struct cfg80211_bitrate_mask beacon_tx_rate;
+	enum nl80211_beacon_tx_mode beacon_tx_mode;
 };
 
 /**
diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c
index 7a99892..18e0d98 100644
--- a/net/mac80211/cfg.c
+++ b/net/mac80211/cfg.c
@@ -1063,6 +1063,7 @@  static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev,
 
 	prev_beacon_int = sdata->vif.bss_conf.beacon_int;
 	sdata->vif.bss_conf.beacon_int = params->beacon_interval;
+	sdata->vif.bss_conf.beacon_tx_mode = params->beacon_tx_mode;
 
 	if (params->he_cap && params->he_oper) {
 		sdata->vif.bss_conf.he_support = true;
@@ -2094,6 +2095,7 @@  static int copy_mesh_setup(struct ieee80211_if_mesh *ifmsh,
 
 	sdata->vif.bss_conf.beacon_int = setup->beacon_interval;
 	sdata->vif.bss_conf.dtim_period = setup->dtim_period;
+	sdata->vif.bss_conf.beacon_tx_mode = setup->beacon_tx_mode;
 
 	sdata->beacon_rate_set = false;
 	if (wiphy_ext_feature_isset(sdata->local->hw.wiphy,