diff mbox series

[next] net: phy: realtek: net: Fix less than zero comparison of a u16

Message ID 20210609171748.298027-1-colin.king@canonical.com
State New
Headers show
Series [next] net: phy: realtek: net: Fix less than zero comparison of a u16 | expand

Commit Message

Colin King June 9, 2021, 5:17 p.m. UTC 
From: Colin Ian King <colin.king@canonical.com>

The comparisons of the u16 values priv->phycr1 and priv->phycr2 to less
than zero always false because they are unsigned. Fix this by using an
int for the assignment and less than zero check.

Addresses-Coverity: ("Unsigned compared against 0")
Fixes: 0a4355c2b7f8 ("net: phy: realtek: add dt property to disable CLKOUT clock")
Fixes: d90db36a9e74 ("net: phy: realtek: add dt property to enable ALDPS mode")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
 drivers/net/phy/realtek.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/phy/realtek.c b/drivers/net/phy/realtek.c
index 1b844a06fe72..11be60333fa8 100644
--- a/drivers/net/phy/realtek.c
+++ b/drivers/net/phy/realtek.c
@@ -94,24 +94,25 @@  static int rtl821x_probe(struct phy_device *phydev)
 {
 	struct device *dev = &phydev->mdio.dev;
 	struct rtl821x_priv *priv;
+	int ret;
 
 	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 	if (!priv)
 		return -ENOMEM;
 
-	priv->phycr1 = phy_read_paged(phydev, 0xa43, RTL8211F_PHYCR1);
-	if (priv->phycr1 < 0)
-		return priv->phycr1;
+	ret = phy_read_paged(phydev, 0xa43, RTL8211F_PHYCR1);
+	if (ret < 0)
+		return ret;
 
-	priv->phycr1 &= (RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_XTAL_OFF);
+	priv->phycr1 = ret & (RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_XTAL_OFF);
 	if (of_property_read_bool(dev->of_node, "realtek,aldps-enable"))
 		priv->phycr1 |= RTL8211F_ALDPS_PLL_OFF | RTL8211F_ALDPS_ENABLE | RTL8211F_ALDPS_XTAL_OFF;
 
-	priv->phycr2 = phy_read_paged(phydev, 0xa43, RTL8211F_PHYCR2);
-	if (priv->phycr2 < 0)
-		return priv->phycr2;
+	ret = phy_read_paged(phydev, 0xa43, RTL8211F_PHYCR2);
+	if (ret < 0)
+		return ret;
 
-	priv->phycr2 &= RTL8211F_CLKOUT_EN;
+	priv->phycr2 = ret & RTL8211F_CLKOUT_EN;
 	if (of_property_read_bool(dev->of_node, "realtek,clkout-disable"))
 		priv->phycr2 &= ~RTL8211F_CLKOUT_EN;