diff mbox series

[net-next,01/11] net: z85230: remove redundant blank lines

Message ID 1623569903-47930-2-git-send-email-huangguangbin2@huawei.com
State Superseded
Headers show
Series [net-next,01/11] net: z85230: remove redundant blank lines | expand

Commit Message

huangguangbin (A) June 13, 2021, 7:38 a.m. UTC
From: Peng Li <lipeng321@huawei.com>

This patch removes some redundant blank lines.

Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
---
 drivers/net/wan/z85230.c | 34 +---------------------------------
 1 file changed, 1 insertion(+), 33 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wan/z85230.c b/drivers/net/wan/z85230.c
index 002b8c99..f074cb1 100644
--- a/drivers/net/wan/z85230.c
+++ b/drivers/net/wan/z85230.c
@@ -55,7 +55,6 @@ 
 
 #include "z85230.h"
 
-
 /**
  *	z8530_read_port - Architecture specific interface function
  *	@p: port to read
@@ -95,7 +94,6 @@  static inline int z8530_read_port(unsigned long p)
  *	dread 5uS sanity delay.
  */
 
-
 static inline void z8530_write_port(unsigned long p, u8 d)
 {
 	outb(d,Z8530_PORT_OF(p));
@@ -103,12 +101,9 @@  static inline void z8530_write_port(unsigned long p, u8 d)
 		udelay(5);
 }
 
-
-
 static void z8530_rx_done(struct z8530_channel *c);
 static void z8530_tx_done(struct z8530_channel *c);
 
-
 /**
  *	read_zsreg - Read a register from a Z85230 
  *	@c: Z8530 channel to read from (2 per chip)
@@ -159,7 +154,6 @@  static inline void write_zsreg(struct z8530_channel *c, u8 reg, u8 val)
 	if(reg)
 		z8530_write_port(c->ctrlio, reg);
 	z8530_write_port(c->ctrlio, val);
-
 }
 
 /**
@@ -182,8 +176,6 @@  static inline void write_zsctrl(struct z8530_channel *c, u8 val)
  *
  *	Write directly to the data register on the Z8530
  */
-
-
 static inline void write_zsdata(struct z8530_channel *c, u8 val)
 {
 	z8530_write_port(c->dataio, val);
@@ -204,7 +196,6 @@  EXPORT_SYMBOL(z8530_dead_port);
  *	Register loading parameters for currently supported circuit types
  */
 
-
 /*
  *	Data clocked by telco end. This is the correct data for the UK
  *	"kilostream" service, and most other similar services.
@@ -352,7 +343,6 @@  static void z8530_rx(struct z8530_channel *c)
 
 		if(stat&END_FR)
 		{
-		
 			/*
 			 *	Error ?
 			 */
@@ -392,7 +382,6 @@  static void z8530_rx(struct z8530_channel *c)
 	write_zsctrl(c, RES_H_IUS);
 }
 
-
 /**
  *	z8530_tx - Handle a PIO transmit event
  *	@c: Z8530 channel to process
@@ -423,7 +412,6 @@  static void z8530_tx(struct z8530_channel *c)
 		}
 	}
 
-	
 	/*
 	 *	End of frame TX - fire another one
 	 */
@@ -474,7 +462,6 @@  static void z8530_status(struct z8530_channel *chan)
 			if (chan->netdevice)
 				netif_carrier_off(chan->netdevice);
 		}
-
 	}
 	write_zsctrl(chan, RES_EXT_INT);
 	write_zsctrl(chan, RES_H_IUS);
@@ -564,7 +551,6 @@  static void z8530_dma_status(struct z8530_channel *chan)
 	
 	chan->status=status;
 
-
 	if(chan->dma_tx)
 	{
 		if(status&TxEOM)
@@ -621,7 +607,6 @@  static struct z8530_irqhandler z8530_txdma_sync = {
  *	(eg the MacII) we must clear the interrupt cause or die.
  */
 
-
 static void z8530_rx_clear(struct z8530_channel *c)
 {
 	/*
@@ -680,7 +665,6 @@  struct z8530_irqhandler z8530_nop = {
 	.status = z8530_status_clear,
 };
 
-
 EXPORT_SYMBOL(z8530_nop);
 
 /**
@@ -718,7 +702,6 @@  irqreturn_t z8530_interrupt(int irq, void *dev_id)
 
 	while(++work<5000)
 	{
-
 		intr = read_zsreg(&dev->chanA, R3);
 		if(!(intr & (CHARxIP|CHATxIP|CHAEXT|CHBRxIP|CHBTxIP|CHBEXT)))
 			break;
@@ -772,7 +755,6 @@  static const u8 reg_init[16]=
 	0x55,0,0,0
 };
 
-
 /**
  *	z8530_sync_open - Open a Z8530 channel for PIO
  *	@dev:	The network interface we are using
@@ -808,7 +790,6 @@  int z8530_sync_open(struct net_device *dev, struct z8530_channel *c)
 	return 0;
 }
 
-
 EXPORT_SYMBOL(z8530_sync_open);
 
 /**
@@ -1070,7 +1051,6 @@  int z8530_sync_txdma_open(struct net_device *dev, struct z8530_channel *c)
 
 	c->tx_dma_buf[1] = c->tx_dma_buf[0] + PAGE_SIZE/2;
 
-
 	spin_lock_irqsave(c->lock, cflags);
 
 	/*
@@ -1150,7 +1130,6 @@  int z8530_sync_txdma_close(struct net_device *dev, struct z8530_channel *c)
 	unsigned long dflags, cflags;
 	u8 chk;
 
-	
 	spin_lock_irqsave(c->lock, cflags);
 	
 	c->irqs = &z8530_nop;
@@ -1195,10 +1174,8 @@  int z8530_sync_txdma_close(struct net_device *dev, struct z8530_channel *c)
 	return 0;
 }
 
-
 EXPORT_SYMBOL(z8530_sync_txdma_close);
 
-
 /*
  *	Name strings for Z8530 chips. SGI claim to have a 130, Zilog deny
  *	it exists...
@@ -1333,7 +1310,6 @@  int z8530_init(struct z8530_dev *dev)
 	return ret;
 }
 
-
 EXPORT_SYMBOL(z8530_init);
 
 /**
@@ -1408,7 +1384,6 @@  int z8530_channel_load(struct z8530_channel *c, u8 *rtable)
 
 EXPORT_SYMBOL(z8530_channel_load);
 
-
 /**
  *	z8530_tx_begin - Begin packet transmission
  *	@c: The Z8530 channel to kick
@@ -1455,8 +1430,7 @@  static void z8530_tx_begin(struct z8530_channel *c)
 	else
 	{
 		c->txcount=c->tx_skb->len;
-		
-		
+
 		if(c->dma_tx)
 		{
 			/*
@@ -1490,7 +1464,6 @@  static void z8530_tx_begin(struct z8530_channel *c)
 		}
 		else
 		{
-
 			/* ABUNDER off */
 			write_zsreg(c, R10, c->regs[10]);
 			write_zsctrl(c, RES_Tx_CRC);
@@ -1500,7 +1473,6 @@  static void z8530_tx_begin(struct z8530_channel *c)
 				write_zsreg(c, R8, *c->tx_ptr++);
 				c->txcount--;
 			}
-
 		}
 	}
 	/*
@@ -1573,14 +1545,12 @@  static void z8530_rx_done(struct z8530_channel *c)
 	/*
 	 *	Is our receive engine in DMA mode
 	 */
-	 
 	if(c->rxdma_on)
 	{
 		/*
 		 *	Save the ready state and the buffer currently
 		 *	being used as the DMA target
 		 */
-		 
 		int ready=c->dma_ready;
 		unsigned char *rxb=c->rx_buf[c->dma_num];
 		unsigned long flags;
@@ -1588,7 +1558,6 @@  static void z8530_rx_done(struct z8530_channel *c)
 		/*
 		 *	Complete this DMA. Necessary to find the length
 		 */		
-		 
 		flags=claim_dma_lock();
 		
 		disable_dma(c->rxdma);
@@ -1731,7 +1700,6 @@  netdev_tx_t z8530_queue_xmit(struct z8530_channel *c, struct sk_buff *skb)
 	if(c->tx_next_skb)
 		return NETDEV_TX_BUSY;
 
-	
 	/* PC SPECIFIC - DMA limits */
 	
 	/*