diff mbox series

[v2,net-next,5/6] net: dsa: targeted MTU notifiers should only match on one port

Message ID 20210621164219.3780244-6-olteanv@gmail.com
State New
Headers show
Series Improvement for DSA cross-chip setups | expand

Commit Message

Vladimir Oltean June 21, 2021, 4:42 p.m. UTC 
From: Vladimir Oltean <vladimir.oltean@nxp.com>

dsa_slave_change_mtu() calls dsa_port_mtu_change() twice:
- it sends a cross-chip notifier with the MTU of the CPU port which is
  used to update the DSA links.
- it sends one targeted MTU notifier which is supposed to only match the
  user port on which we are changing the MTU. The "propagate_upstream"
  variable is used here to bypass the cross-chip notifier system from
  switch.c

But due to a mistake, the second, targeted notifier matches not only on
the user port, but also on the DSA link which is a member of the same
switch, if that exists.

And because the DSA links of the entire dst were programmed in a
previous round to the largest_mtu via a "propagate_upstream == true"
notification, then the dsa_port_mtu_change(propagate_upstream == false)
call that is immediately upcoming will break the MTU on the one DSA link
which is chip-wise local to the dp whose MTU is changing right now.

Example given this daisy chain topology:

   sw0p0     sw0p1     sw0p2     sw0p3     sw0p4
[  cpu  ] [  user ] [  user ] [  dsa  ] [  user ]
[   x   ] [       ] [       ] [   x   ] [       ]
                                  |
                                  +---------+
                                            |
   sw1p0     sw1p1     sw1p2     sw1p3     sw1p4
[  user ] [  user ] [  user ] [  dsa  ] [  dsa  ]
[       ] [       ] [       ] [       ] [   x   ]

ip link set sw0p1 mtu 9000
ip link set sw1p1 mtu 9000 # at this stage, sw0p1 and sw1p1 can talk
                           # to one another using jumbo frames
ip link set sw0p2 mtu 1500 # this programs the sw0p3 DSA link first to
                           # the largest_mtu of 9000, then reprograms it to
                           # 1500 with the "propagate_upstream == false"
                           # notifier, breaking communication between
                           # sw0p1 and sw1p1

To escape from this situation, make the targeted match really match on a
single port - the user port, and rename the "propagate_upstream"
variable to "targeted_match" to clarify the intention and avoid future
issues.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
---
v1->v2: none

 net/dsa/dsa_priv.h | 4 ++--
 net/dsa/port.c     | 4 ++--
 net/dsa/slave.c    | 9 +++++----
 net/dsa/switch.c   | 9 ++++++---
 4 files changed, 15 insertions(+), 11 deletions(-)
diff mbox series

Patch

diff --git a/net/dsa/dsa_priv.h b/net/dsa/dsa_priv.h
index b8b17474b72b..b0811253d101 100644
--- a/net/dsa/dsa_priv.h
+++ b/net/dsa/dsa_priv.h
@@ -84,7 +84,7 @@  struct dsa_notifier_vlan_info {
 
 /* DSA_NOTIFIER_MTU */
 struct dsa_notifier_mtu_info {
-	bool propagate_upstream;
+	bool targeted_match;
 	int sw_index;
 	int port;
 	int mtu;
@@ -200,7 +200,7 @@  int dsa_port_vlan_filtering(struct dsa_port *dp, bool vlan_filtering,
 bool dsa_port_skip_vlan_configuration(struct dsa_port *dp);
 int dsa_port_ageing_time(struct dsa_port *dp, clock_t ageing_clock);
 int dsa_port_mtu_change(struct dsa_port *dp, int new_mtu,
-			bool propagate_upstream);
+			bool targeted_match);
 int dsa_port_fdb_add(struct dsa_port *dp, const unsigned char *addr,
 		     u16 vid);
 int dsa_port_fdb_del(struct dsa_port *dp, const unsigned char *addr,
diff --git a/net/dsa/port.c b/net/dsa/port.c
index 6379d66a6bb3..5c93f1e1a03d 100644
--- a/net/dsa/port.c
+++ b/net/dsa/port.c
@@ -567,11 +567,11 @@  int dsa_port_mrouter(struct dsa_port *dp, bool mrouter,
 }
 
 int dsa_port_mtu_change(struct dsa_port *dp, int new_mtu,
-			bool propagate_upstream)
+			bool targeted_match)
 {
 	struct dsa_notifier_mtu_info info = {
 		.sw_index = dp->ds->index,
-		.propagate_upstream = propagate_upstream,
+		.targeted_match = targeted_match,
 		.port = dp->index,
 		.mtu = new_mtu,
 	};
diff --git a/net/dsa/slave.c b/net/dsa/slave.c
index ac2ca5f75af3..5e668e529575 100644
--- a/net/dsa/slave.c
+++ b/net/dsa/slave.c
@@ -1586,14 +1586,15 @@  int dsa_slave_change_mtu(struct net_device *dev, int new_mtu)
 			goto out_master_failed;
 
 		/* We only need to propagate the MTU of the CPU port to
-		 * upstream switches.
+		 * upstream switches, so create a non-targeted notifier which
+		 * updates all switches.
 		 */
-		err = dsa_port_mtu_change(cpu_dp, cpu_mtu, true);
+		err = dsa_port_mtu_change(cpu_dp, cpu_mtu, false);
 		if (err)
 			goto out_cpu_failed;
 	}
 
-	err = dsa_port_mtu_change(dp, new_mtu, false);
+	err = dsa_port_mtu_change(dp, new_mtu, true);
 	if (err)
 		goto out_port_failed;
 
@@ -1607,7 +1608,7 @@  int dsa_slave_change_mtu(struct net_device *dev, int new_mtu)
 	if (new_master_mtu != old_master_mtu)
 		dsa_port_mtu_change(cpu_dp, old_master_mtu -
 				    dsa_tag_protocol_overhead(cpu_dp->tag_ops),
-				    true);
+				    false);
 out_cpu_failed:
 	if (new_master_mtu != old_master_mtu)
 		dev_set_mtu(master, old_master_mtu);
diff --git a/net/dsa/switch.c b/net/dsa/switch.c
index 8b601ced6b45..75f567390a6b 100644
--- a/net/dsa/switch.c
+++ b/net/dsa/switch.c
@@ -52,10 +52,13 @@  static int dsa_switch_ageing_time(struct dsa_switch *ds,
 static bool dsa_switch_mtu_match(struct dsa_switch *ds, int port,
 				 struct dsa_notifier_mtu_info *info)
 {
-	if (ds->index == info->sw_index)
-		return (port == info->port) || dsa_is_dsa_port(ds, port);
+	if (ds->index == info->sw_index && port == info->port)
+		return true;
 
-	if (!info->propagate_upstream)
+	/* Do not propagate to other switches in the tree if the notifier was
+	 * targeted for a single switch.
+	 */
+	if (info->targeted_match)
 		return false;
 
 	if (dsa_is_dsa_port(ds, port) || dsa_is_cpu_port(ds, port))