diff mbox series

[1/6] dt-bindings: clock: qcom,dispcc-sm8x50: add mmcx power domain

Message ID 20210630133149.3204290-2-dmitry.baryshkov@linaro.org
State Superseded
Headers show
Series [1/6] dt-bindings: clock: qcom,dispcc-sm8x50: add mmcx power domain | expand

Commit Message

Dmitry Baryshkov June 30, 2021, 1:31 p.m. UTC
On sm8250 dispcc requires MMCX power domain to be powered up before
clock controller's registers become available. For now sm8250 was using
external regulator driven by the power domain to describe this
relationship. Switch into specifying power-domain and required opp-state
directly.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

---
 .../bindings/clock/qcom,dispcc-sm8x50.yaml    | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

-- 
2.30.2

Comments

Ulf Hansson July 1, 2021, 4:16 p.m. UTC | #1
On Wed, 30 Jun 2021 at 15:31, Dmitry Baryshkov
<dmitry.baryshkov@linaro.org> wrote:
>
> On sm8250 dispcc requires MMCX power domain to be powered up before
> clock controller's registers become available. For now sm8250 was using
> external regulator driven by the power domain to describe this
> relationship. Switch into specifying power-domain and required opp-state
> directly.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>  .../bindings/clock/qcom,dispcc-sm8x50.yaml    | 19 +++++++++++++++++++
>  1 file changed, 19 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
> index 0cdf53f41f84..48d86fb34fa7 100644
> --- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
> +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
> @@ -55,6 +55,16 @@ properties:
>    reg:
>      maxItems: 1
>
> +  power-domains:
> +    description:
> +      A phandle and PM domain specifier for the MMCX power domain.
> +    maxItems: 1
> +

Should you perhaps state that this is a parent domain? Or it isn't?

Related to this and because this is a power domain provider, you
should probably reference the common power-domain bindings somewhere
here. Along the lines of this:

- $ref: power-domain.yaml#

As an example, you could have a look at
Documentation/devicetree/bindings/power/pd-samsung.yaml.

> +  required-opps:
> +    description:
> +      Performance state to use for MMCX to enable register access.
> +    maxItems: 1

According to the previous discussions, I was under the assumption that
this property belongs to a consumer node rather than in the provider
node, no?

> +
>  required:
>    - compatible
>    - reg
> @@ -64,6 +74,15 @@ required:
>    - '#reset-cells'
>    - '#power-domain-cells'
>
> +# Either both properties are present or both are absent
> +dependencies:
> +  power-domains:
> +    required:
> +      - required-opps
> +  required-opps:
> +    required:
> +      - power-domains
> +
>  additionalProperties: false
>
>  examples:
> --
> 2.30.2
>

Kind regards
Uffe
Dmitry Baryshkov July 1, 2021, 4:39 p.m. UTC | #2
On Thu, 1 Jul 2021 at 19:17, Ulf Hansson <ulf.hansson@linaro.org> wrote:
>

> On Wed, 30 Jun 2021 at 15:31, Dmitry Baryshkov

> <dmitry.baryshkov@linaro.org> wrote:

> >

> > On sm8250 dispcc requires MMCX power domain to be powered up before

> > clock controller's registers become available. For now sm8250 was using

> > external regulator driven by the power domain to describe this

> > relationship. Switch into specifying power-domain and required opp-state

> > directly.

> >

> > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> > ---

> >  .../bindings/clock/qcom,dispcc-sm8x50.yaml    | 19 +++++++++++++++++++

> >  1 file changed, 19 insertions(+)

> >

> > diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml

> > index 0cdf53f41f84..48d86fb34fa7 100644

> > --- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml

> > +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml

> > @@ -55,6 +55,16 @@ properties:

> >    reg:

> >      maxItems: 1

> >

> > +  power-domains:

> > +    description:

> > +      A phandle and PM domain specifier for the MMCX power domain.

> > +    maxItems: 1

> > +

>

> Should you perhaps state that this is a parent domain? Or it isn't?

>

> Related to this and because this is a power domain provider, you

> should probably reference the common power-domain bindings somewhere

> here. Along the lines of this:

>

> - $ref: power-domain.yaml#

>

> As an example, you could have a look at

> Documentation/devicetree/bindings/power/pd-samsung.yaml.


I'll take a look.

>

> > +  required-opps:

> > +    description:

> > +      Performance state to use for MMCX to enable register access.

> > +    maxItems: 1

>

> According to the previous discussions, I was under the assumption that

> this property belongs to a consumer node rather than in the provider

> node, no?


It is both a consumer and a provider. It consumes SM8250_MMCX from
rpmhpd and provides MMSC_GDSC.

>

> > +

> >  required:

> >    - compatible

> >    - reg

> > @@ -64,6 +74,15 @@ required:

> >    - '#reset-cells'

> >    - '#power-domain-cells'

> >

> > +# Either both properties are present or both are absent

> > +dependencies:

> > +  power-domains:

> > +    required:

> > +      - required-opps

> > +  required-opps:

> > +    required:

> > +      - power-domains

> > +

> >  additionalProperties: false

> >

> >  examples:

> > --

> > 2.30.2

> >

>

> Kind regards

> Uffe




-- 
With best wishes
Dmitry
Ulf Hansson July 1, 2021, 4:58 p.m. UTC | #3
On Thu, 1 Jul 2021 at 18:39, Dmitry Baryshkov
<dmitry.baryshkov@linaro.org> wrote:
>

> On Thu, 1 Jul 2021 at 19:17, Ulf Hansson <ulf.hansson@linaro.org> wrote:

> >

> > On Wed, 30 Jun 2021 at 15:31, Dmitry Baryshkov

> > <dmitry.baryshkov@linaro.org> wrote:

> > >

> > > On sm8250 dispcc requires MMCX power domain to be powered up before

> > > clock controller's registers become available. For now sm8250 was using

> > > external regulator driven by the power domain to describe this

> > > relationship. Switch into specifying power-domain and required opp-state

> > > directly.

> > >

> > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

> > > ---

> > >  .../bindings/clock/qcom,dispcc-sm8x50.yaml    | 19 +++++++++++++++++++

> > >  1 file changed, 19 insertions(+)

> > >

> > > diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml

> > > index 0cdf53f41f84..48d86fb34fa7 100644

> > > --- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml

> > > +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml

> > > @@ -55,6 +55,16 @@ properties:

> > >    reg:

> > >      maxItems: 1

> > >

> > > +  power-domains:

> > > +    description:

> > > +      A phandle and PM domain specifier for the MMCX power domain.

> > > +    maxItems: 1

> > > +

> >

> > Should you perhaps state that this is a parent domain? Or it isn't?

> >

> > Related to this and because this is a power domain provider, you

> > should probably reference the common power-domain bindings somewhere

> > here. Along the lines of this:

> >

> > - $ref: power-domain.yaml#

> >

> > As an example, you could have a look at

> > Documentation/devicetree/bindings/power/pd-samsung.yaml.

>

> I'll take a look.

>

> >

> > > +  required-opps:

> > > +    description:

> > > +      Performance state to use for MMCX to enable register access.

> > > +    maxItems: 1

> >

> > According to the previous discussions, I was under the assumption that

> > this property belongs to a consumer node rather than in the provider

> > node, no?

>

> It is both a consumer and a provider. It consumes SM8250_MMCX from

> rpmhpd and provides MMSC_GDSC.


That sounds a bit weird to me.

In my view and per the common power domain bindings (as pointed to
above): If a power domain provider is a consumer of another power
domain, that per definition means that there is a parent domain
specified.

[...]

Kind regards
Uffe
Bjorn Andersson July 1, 2021, 7:26 p.m. UTC | #4
On Thu 01 Jul 11:58 CDT 2021, Ulf Hansson wrote:

> On Thu, 1 Jul 2021 at 18:39, Dmitry Baryshkov
> <dmitry.baryshkov@linaro.org> wrote:
> >
> > On Thu, 1 Jul 2021 at 19:17, Ulf Hansson <ulf.hansson@linaro.org> wrote:
> > >
> > > On Wed, 30 Jun 2021 at 15:31, Dmitry Baryshkov
> > > <dmitry.baryshkov@linaro.org> wrote:
> > > >
> > > > On sm8250 dispcc requires MMCX power domain to be powered up before
> > > > clock controller's registers become available. For now sm8250 was using
> > > > external regulator driven by the power domain to describe this
> > > > relationship. Switch into specifying power-domain and required opp-state
> > > > directly.
> > > >
> > > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> > > > ---
> > > >  .../bindings/clock/qcom,dispcc-sm8x50.yaml    | 19 +++++++++++++++++++
> > > >  1 file changed, 19 insertions(+)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
> > > > index 0cdf53f41f84..48d86fb34fa7 100644
> > > > --- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
> > > > +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
> > > > @@ -55,6 +55,16 @@ properties:
> > > >    reg:
> > > >      maxItems: 1
> > > >
> > > > +  power-domains:
> > > > +    description:
> > > > +      A phandle and PM domain specifier for the MMCX power domain.
> > > > +    maxItems: 1
> > > > +
> > >
> > > Should you perhaps state that this is a parent domain? Or it isn't?
> > >
> > > Related to this and because this is a power domain provider, you
> > > should probably reference the common power-domain bindings somewhere
> > > here. Along the lines of this:
> > >
> > > - $ref: power-domain.yaml#
> > >
> > > As an example, you could have a look at
> > > Documentation/devicetree/bindings/power/pd-samsung.yaml.
> >
> > I'll take a look.
> >
> > >
> > > > +  required-opps:
> > > > +    description:
> > > > +      Performance state to use for MMCX to enable register access.
> > > > +    maxItems: 1
> > >
> > > According to the previous discussions, I was under the assumption that
> > > this property belongs to a consumer node rather than in the provider
> > > node, no?
> >
> > It is both a consumer and a provider. It consumes SM8250_MMCX from
> > rpmhpd and provides MMSC_GDSC.
> 
> That sounds a bit weird to me.
> 

dispcc is a hardware block powered by MMCX, so it is a consumer of it
and needs to control MMCX.

> In my view and per the common power domain bindings (as pointed to
> above): If a power domain provider is a consumer of another power
> domain, that per definition means that there is a parent domain
> specified.
> 

And in addition to needing MMCX to access the dispcc, the exposed
power-domain "MDSS_GDSC" is powered by the same MMCX and as such
MDSS_GDSC should be a subdomain of MMCX.


But what I was trying to say yesterday is that the power-domain property
should be sufficient and that we shouldn't need to drive MMCX to a
particular performance_state in order to access the registers.

Then as clients make votes on clock rates that requires higher
performance_state, they would describe this in their opp-tables etc.


But without any performance_state requests, pd->corner will in
rpmhpd_power_on() be 0 and as such powering on the power-domain won't
actually do anything. Similarly dev_pm_genpd_set_performance_state(dev,
0) on an active power-domain from rpmhpd will turn it off.


So the reason why Dmitry is adding the required-opps to the binding is
to get rpmhpd to actually tell the hardware to turn on the power domain.
And I don't think this is in accordance with the framework's
expectations.

Regards,
Bjorn
Ulf Hansson July 6, 2021, 7:23 a.m. UTC | #5
On Thu, 1 Jul 2021 at 21:26, Bjorn Andersson <bjorn.andersson@linaro.org> wrote:
>
> On Thu 01 Jul 11:58 CDT 2021, Ulf Hansson wrote:
>
> > On Thu, 1 Jul 2021 at 18:39, Dmitry Baryshkov
> > <dmitry.baryshkov@linaro.org> wrote:
> > >
> > > On Thu, 1 Jul 2021 at 19:17, Ulf Hansson <ulf.hansson@linaro.org> wrote:
> > > >
> > > > On Wed, 30 Jun 2021 at 15:31, Dmitry Baryshkov
> > > > <dmitry.baryshkov@linaro.org> wrote:
> > > > >
> > > > > On sm8250 dispcc requires MMCX power domain to be powered up before
> > > > > clock controller's registers become available. For now sm8250 was using
> > > > > external regulator driven by the power domain to describe this
> > > > > relationship. Switch into specifying power-domain and required opp-state
> > > > > directly.
> > > > >
> > > > > Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> > > > > ---
> > > > >  .../bindings/clock/qcom,dispcc-sm8x50.yaml    | 19 +++++++++++++++++++
> > > > >  1 file changed, 19 insertions(+)
> > > > >
> > > > > diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
> > > > > index 0cdf53f41f84..48d86fb34fa7 100644
> > > > > --- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
> > > > > +++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
> > > > > @@ -55,6 +55,16 @@ properties:
> > > > >    reg:
> > > > >      maxItems: 1
> > > > >
> > > > > +  power-domains:
> > > > > +    description:
> > > > > +      A phandle and PM domain specifier for the MMCX power domain.
> > > > > +    maxItems: 1
> > > > > +
> > > >
> > > > Should you perhaps state that this is a parent domain? Or it isn't?
> > > >
> > > > Related to this and because this is a power domain provider, you
> > > > should probably reference the common power-domain bindings somewhere
> > > > here. Along the lines of this:
> > > >
> > > > - $ref: power-domain.yaml#
> > > >
> > > > As an example, you could have a look at
> > > > Documentation/devicetree/bindings/power/pd-samsung.yaml.
> > >
> > > I'll take a look.
> > >
> > > >
> > > > > +  required-opps:
> > > > > +    description:
> > > > > +      Performance state to use for MMCX to enable register access.
> > > > > +    maxItems: 1
> > > >
> > > > According to the previous discussions, I was under the assumption that
> > > > this property belongs to a consumer node rather than in the provider
> > > > node, no?
> > >
> > > It is both a consumer and a provider. It consumes SM8250_MMCX from
> > > rpmhpd and provides MMSC_GDSC.
> >
> > That sounds a bit weird to me.
> >
>
> dispcc is a hardware block powered by MMCX, so it is a consumer of it
> and needs to control MMCX.

Right, that sounds reasonable.

>
> > In my view and per the common power domain bindings (as pointed to
> > above): If a power domain provider is a consumer of another power
> > domain, that per definition means that there is a parent domain
> > specified.
> >
>
> And in addition to needing MMCX to access the dispcc, the exposed
> power-domain "MDSS_GDSC" is powered by the same MMCX and as such
> MDSS_GDSC should be a subdomain of MMCX.

What do you mean by "exposed"? It sounds like you are saying that
"MDSS_GDSC" is an artificial power domain, no?

If that's the case, more exactly, why is it like this?

My apologies if I bother you with details, but as a maintainer of
genpd, it is very useful to me to have the complete picture.

>
>
> But what I was trying to say yesterday is that the power-domain property
> should be sufficient and that we shouldn't need to drive MMCX to a
> particular performance_state in order to access the registers.
>
> Then as clients make votes on clock rates that requires higher
> performance_state, they would describe this in their opp-tables etc.
>
>
> But without any performance_state requests, pd->corner will in
> rpmhpd_power_on() be 0 and as such powering on the power-domain won't
> actually do anything. Similarly dev_pm_genpd_set_performance_state(dev,
> 0) on an active power-domain from rpmhpd will turn it off.

Yes, I noticed the patches you posted. Thanks for helping out here!

>
>
> So the reason why Dmitry is adding the required-opps to the binding is
> to get rpmhpd to actually tell the hardware to turn on the power domain.
> And I don't think this is in accordance with the framework's
> expectations.

I agree!

>
> Regards,
> Bjorn

Kind regards
Uffe
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
index 0cdf53f41f84..48d86fb34fa7 100644
--- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
@@ -55,6 +55,16 @@  properties:
   reg:
     maxItems: 1
 
+  power-domains:
+    description:
+      A phandle and PM domain specifier for the MMCX power domain.
+    maxItems: 1
+
+  required-opps:
+    description:
+      Performance state to use for MMCX to enable register access.
+    maxItems: 1
+
 required:
   - compatible
   - reg
@@ -64,6 +74,15 @@  required:
   - '#reset-cells'
   - '#power-domain-cells'
 
+# Either both properties are present or both are absent
+dependencies:
+  power-domains:
+    required:
+      - required-opps
+  required-opps:
+    required:
+      - power-domains
+
 additionalProperties: false
 
 examples: