| Message ID | 1428669263-10990-1-git-send-email-srinivas.kandagatla@linaro.org |
|---|---|
| State | New |
| Headers | show |
On 10/04/15 18:24, Stephen Boyd wrote: > On 04/10/15 05:34, Srinivas Kandagatla wrote: >> This patch adds AHCI based SATA controller support to APQ8064. >> Tested on IFC6410 board. >> >> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> >> --- >> arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 9 ++++++++ >> arch/arm/boot/dts/qcom-apq8064.dtsi | 35 ++++++++++++++++++++++++++++++ >> 2 files changed, 44 insertions(+) >> >> diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts >> index 122bf34..c9c9c5e 100644 >> --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts >> +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts >> @@ -116,6 +116,15 @@ >> }; >> }; >> >> + sata_phy0: sata-phy@1b400000{ > > Space before '{' please. Yeo, Will fix it in next version. > >> + status = "okay"; >> + }; >> + >> + sata0: sata@29000000 { >> + status = "okay"; >> + target-supply = <&pm8921_s4>; >> + }; >> + >> /* OTG */ >> usb1_phy: phy@12500000 { >> status = "okay"; >> diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi >> index 5aac9a5..56cc65e 100644 >> --- a/arch/arm/boot/dts/qcom-apq8064.dtsi >> +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi >> @@ -379,6 +379,41 @@ >> usb-phy = <&usb4_phy>; >> }; >> >> + sata_phy0: sata-phy@1b400000{ > > Space before '{' please. Also I wonder if it should just be called > phy@1b400000 because phy is more standard than sata-phy. Make sense, I will fix it in next version. > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts index 122bf34..c9c9c5e 100644 --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts @@ -116,6 +116,15 @@ }; }; + sata_phy0: sata-phy@1b400000{ + status = "okay"; + }; + + sata0: sata@29000000 { + status = "okay"; + target-supply = <&pm8921_s4>; + }; + /* OTG */ usb1_phy: phy@12500000 { status = "okay"; diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index 5aac9a5..56cc65e 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -379,6 +379,41 @@ usb-phy = <&usb4_phy>; }; + sata_phy0: sata-phy@1b400000{ + compatible = "qcom,apq8064-sata-phy"; + status = "disabled"; + reg = <0x1b400000 0x200>; + reg-names = "phy_mem"; + clocks = <&gcc SATA_PHY_CFG_CLK>; + clock-names = "cfg"; + #phy-cells = <0>; + }; + + sata0: sata@29000000 { + compatible = "generic-ahci"; + status = "disabled"; + reg = <0x29000000 0x180>; + interrupts = <GIC_SPI 209 IRQ_TYPE_NONE>; + + clocks = <&gcc SFAB_SATA_S_H_CLK>, + <&gcc SATA_H_CLK>, + <&gcc SATA_A_CLK>, + <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + clock-names = "slave_iface", + "iface", + "bus", + "rxoob", + "core_pmalive"; + + assigned-clocks = <&gcc SATA_RXOOB_CLK>, + <&gcc SATA_PMALIVE_CLK>; + assigned-clock-rates = <100000000>, <100000000>; + + phys = <&sata_phy0>; + phy-names = "sata-phy"; + }; + /* Temporary fixed regulator */ vsdcc_fixed: vsdcc-regulator { compatible = "regulator-fixed";
This patch adds AHCI based SATA controller support to APQ8064. Tested on IFC6410 board. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> --- arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 9 ++++++++ arch/arm/boot/dts/qcom-apq8064.dtsi | 35 ++++++++++++++++++++++++++++++ 2 files changed, 44 insertions(+)