From patchwork Tue Apr 14 06:15:36 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Jun Nie X-Patchwork-Id: 47137 Return-Path: X-Original-To: linaro@patches.linaro.org Delivered-To: linaro@patches.linaro.org Received: from mail-wg0-f69.google.com (mail-wg0-f69.google.com [74.125.82.69]) by ip-10-151-82-157.ec2.internal (Postfix) with ESMTPS id CDDB52121F for ; Tue, 14 Apr 2015 06:16:06 +0000 (UTC) Received: by wgtl5 with SMTP id l5sf26204wgt.1 for ; Mon, 13 Apr 2015 23:16:06 -0700 (PDT) X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20130820; h=x-gm-message-state:mime-version:delivered-to:from:to:cc:subject :date:message-id:sender:precedence:list-id:x-original-sender :x-original-authentication-results:mailing-list:list-post:list-help :list-archive:list-unsubscribe; bh=m//UmmnfkRr02SavsIui4jAlt6Xd12m1RjT/XS5Dgnc=; b=O47V1xlIrdgWakreoNsjr1fN29LcGeIxnfyxJa4LKfFSyUfA8jaHV89f5l+dUk5iKJ rJPzPj1Ylu0bnVWVGLiqOS4CdHyVtnxwf/x7SxGlYwSmLvjr+BOE0tuRR7H42EQNotlf Zb3LvFtax0e8PpeW2FFUQ187+9n17Bnjj5mMl2zT2dI642iiLazx28MDfoDePeTcS2XR 5diPu5C0iX90gGE+bnEBIdr0sydpAgOI1IwKxCcdfQF7noAf2V2/y902M09egYwdspDG F2BS1wBr16Rur8DgPz/rm6t3YGGnj/FVKIpDrIKIVokwaJ61wumMKT4/+cCHK8H7ZiMy 6FFg== X-Gm-Message-State: ALoCoQmI8D/Niu4FUpQjAO+3nLyw/e0i6rqJSBLv9RDhhnsprtIYm1jY1iM+IqKXieH7Sq27ClWT X-Received: by 10.112.26.5 with SMTP id h5mr3072964lbg.4.1428992165968; Mon, 13 Apr 2015 23:16:05 -0700 (PDT) MIME-Version: 1.0 X-BeenThere: patchwork-forward@linaro.org Received: by 10.152.27.10 with SMTP id p10ls292lag.29.gmail; Mon, 13 Apr 2015 23:16:05 -0700 (PDT) X-Received: by 10.152.234.108 with SMTP id ud12mr16542094lac.81.1428992165668; Mon, 13 Apr 2015 23:16:05 -0700 (PDT) Received: from mail-lb0-f179.google.com (mail-lb0-f179.google.com. [209.85.217.179]) by mx.google.com with ESMTPS id kw12si14845lac.3.2015.04.13.23.16.05 for (version=TLSv1.2 cipher=ECDHE-RSA-AES128-GCM-SHA256 bits=128/128); Mon, 13 Apr 2015 23:16:05 -0700 (PDT) Received-SPF: pass (google.com: domain of patch+caf_=patchwork-forward=linaro.org@linaro.org designates 209.85.217.179 as permitted sender) client-ip=209.85.217.179; Received: by lbbzk7 with SMTP id zk7so100771lbb.0 for ; Mon, 13 Apr 2015 23:16:05 -0700 (PDT) X-Received: by 10.112.140.231 with SMTP id rj7mr16137715lbb.76.1428992165280; Mon, 13 Apr 2015 23:16:05 -0700 (PDT) X-Forwarded-To: patchwork-forward@linaro.org X-Forwarded-For: patch@linaro.org patchwork-forward@linaro.org Delivered-To: patch@linaro.org Received: by 10.112.67.65 with SMTP id l1csp1645469lbt; Mon, 13 Apr 2015 23:16:03 -0700 (PDT) X-Received: by 10.67.4.138 with SMTP id ce10mr33497416pad.102.1428992162242; Mon, 13 Apr 2015 23:16:02 -0700 (PDT) Received: from vger.kernel.org (vger.kernel.org. [209.132.180.67]) by mx.google.com with ESMTP id k9si17572pdp.27.2015.04.13.23.16.01 for ; Mon, 13 Apr 2015 23:16:02 -0700 (PDT) Received-SPF: none (google.com: linux-serial-owner@vger.kernel.org does not designate permitted sender hosts) client-ip=209.132.180.67; Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751002AbbDNGQA (ORCPT ); Tue, 14 Apr 2015 02:16:00 -0400 Received: from mail-pd0-f181.google.com ([209.85.192.181]:33442 "EHLO mail-pd0-f181.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750992AbbDNGP7 (ORCPT ); Tue, 14 Apr 2015 02:15:59 -0400 Received: by pdbnk13 with SMTP id nk13so218937pdb.0 for ; Mon, 13 Apr 2015 23:15:59 -0700 (PDT) X-Received: by 10.70.29.4 with SMTP id f4mr23025771pdh.23.1428992159135; Mon, 13 Apr 2015 23:15:59 -0700 (PDT) Received: from localhost.localdomain ([107.6.117.179]) by mx.google.com with ESMTPSA id cp10sm5213020pdb.44.2015.04.13.23.15.49 (version=TLSv1.2 cipher=ECDHE-RSA-AES128-SHA bits=128/128); Mon, 13 Apr 2015 23:15:57 -0700 (PDT) From: Jun Nie To: peter@hurleysoftware.com, linux@arm.linux.org.uk, Andrew.Jackson@arm.com, gregkh@linuxfoundation.org, linux-serial@vger.kernel.org, shawn.guo@linaro.org, zte-lt@lists.linaro.org Cc: Jun Nie Subject: [PATCH v5 1/3] uart: pl011: Support registers offset with LUT Date: Tue, 14 Apr 2015 14:15:36 +0800 Message-Id: <1428992138-29158-1-git-send-email-jun.nie@linaro.org> X-Mailer: git-send-email 1.9.1 Sender: linux-serial-owner@vger.kernel.org Precedence: list List-ID: X-Mailing-List: linux-serial@vger.kernel.org X-Removed-Original-Auth: Dkim didn't pass. X-Original-Sender: jun.nie@linaro.org X-Original-Authentication-Results: mx.google.com; spf=pass (google.com: domain of patch+caf_=patchwork-forward=linaro.org@linaro.org designates 209.85.217.179 as permitted sender) smtp.mail=patch+caf_=patchwork-forward=linaro.org@linaro.org Mailing-list: list patchwork-forward@linaro.org; contact patchwork-forward+owners@linaro.org X-Google-Group-Id: 836684582541 List-Post: , List-Help: , List-Archive: List-Unsubscribe: , Both ARM and ST uart use the same pl011 IP, but some registers have different offset. Support the different offset with look up table. Signed-off-by: Jun Nie --- drivers/tty/serial/amba-pl011.c | 343 ++++++++++++++++++++++++---------------- include/linux/amba/serial.h | 4 + 2 files changed, 209 insertions(+), 138 deletions(-) diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 8d94c19..c1c27c0 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -29,7 +29,6 @@ * and hooked into this driver. */ - #if defined(CONFIG_SERIAL_AMBA_PL011_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) #define SUPPORT_SYSRQ #endif @@ -66,6 +65,8 @@ #define SERIAL_AMBA_NR UART_NR #define AMBA_ISR_PASS_LIMIT 256 +#define REG_NR 19 +#define IDX(x) ((x) >> 2) #define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE) #define UART_DUMMY_DR_RX (1 << 16) @@ -73,8 +74,7 @@ /* There is by now at least one vendor with differing details, so handle it */ struct vendor_data { unsigned int ifls; - unsigned int lcrh_tx; - unsigned int lcrh_rx; + u8 *reg_lut; bool oversampling; bool dma_threshold; bool cts_event_workaround; @@ -87,10 +87,32 @@ static unsigned int get_fifosize_arm(struct amba_device *dev) return amba_rev(dev) < 3 ? 16 : 32; } +static u8 arm_reg[] = { + /* All registers offset are in order except [8]=0x2c */ + [IDX(UART01x_DR)] = UART01x_DR, + [IDX(UART01x_RSR)] = UART01x_RSR, + [IDX(ST_UART011_DMAWM)] = ST_UART011_DMAWM, + [IDX(UART010_LCRM)] = UART010_LCRM, + [IDX(UART010_LCRL)] = UART010_LCRL, + [IDX(UART010_CR)] = UART010_CR, + [IDX(UART01x_FR)] = UART01x_FR, + [IDX(UART011_LCRH_RX)] = UART011_LCRH, /* remapped */ + [IDX(UART01x_ILPR)] = UART01x_ILPR, + [IDX(UART011_IBRD)] = UART011_IBRD, + [IDX(UART011_FBRD)] = UART011_FBRD, + [IDX(UART011_LCRH_TX)] = UART011_LCRH_TX, + [IDX(UART011_CR)] = UART011_CR, + [IDX(UART011_IFLS)] = UART011_IFLS, + [IDX(UART011_IMSC)] = UART011_IMSC, + [IDX(UART011_RIS)] = UART011_RIS, + [IDX(UART011_MIS)] = UART011_MIS, + [IDX(UART011_ICR)] = UART011_ICR, + [IDX(UART011_DMACR)] = UART011_DMACR, +}; + static struct vendor_data vendor_arm = { .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, - .lcrh_tx = UART011_LCRH, - .lcrh_rx = UART011_LCRH, + .reg_lut = arm_reg, .oversampling = false, .dma_threshold = false, .cts_event_workaround = false, @@ -102,10 +124,32 @@ static unsigned int get_fifosize_st(struct amba_device *dev) return 64; } +static u8 st_reg[] = { + /* All registers offset are in order */ + [IDX(UART01x_DR)] = UART01x_DR, + [IDX(UART01x_RSR)] = UART01x_RSR, + [IDX(ST_UART011_DMAWM)] = ST_UART011_DMAWM, + [IDX(UART010_LCRM)] = UART010_LCRM, + [IDX(UART010_LCRL)] = UART010_LCRL, + [IDX(UART010_CR)] = UART010_CR, + [IDX(UART01x_FR)] = UART01x_FR, + [IDX(UART011_LCRH_RX)] = UART011_LCRH_RX, + [IDX(UART01x_ILPR)] = UART01x_ILPR, + [IDX(UART011_IBRD)] = UART011_IBRD, + [IDX(UART011_FBRD)] = UART011_FBRD, + [IDX(UART011_LCRH_TX)] = UART011_LCRH_TX, + [IDX(UART011_CR)] = UART011_CR, + [IDX(UART011_IFLS)] = UART011_IFLS, + [IDX(UART011_IMSC)] = UART011_IMSC, + [IDX(UART011_RIS)] = UART011_RIS, + [IDX(UART011_MIS)] = UART011_MIS, + [IDX(UART011_ICR)] = UART011_ICR, + [IDX(UART011_DMACR)] = UART011_DMACR, +}; + static struct vendor_data vendor_st = { .ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF, - .lcrh_tx = ST_UART011_LCRH_TX, - .lcrh_rx = ST_UART011_LCRH_RX, + .reg_lut = st_reg, .oversampling = true, .dma_threshold = true, .cts_event_workaround = true, @@ -148,13 +192,12 @@ struct pl011_dmatx_data { struct uart_amba_port { struct uart_port port; struct clk *clk; + u8 *reg_lut; const struct vendor_data *vendor; unsigned int dmacr; /* dma control reg */ unsigned int im; /* interrupt mask */ unsigned int old_status; unsigned int fifosize; /* vendor-specific */ - unsigned int lcrh_tx; /* vendor-specific */ - unsigned int lcrh_rx; /* vendor-specific */ unsigned int old_cr; /* state during shutdown */ bool autorts; char type[12]; @@ -167,6 +210,24 @@ struct uart_amba_port { #endif }; +static unsigned int pl011_readw(struct uart_amba_port *uap, int index) +{ + WARN_ON(index > (REG_NR << 2)); + return readw_relaxed(uap->port.membase + uap->reg_lut[index >> 2]); +} + +static void pl011_writew(struct uart_amba_port *uap, int val, int index) +{ + WARN_ON(index > (REG_NR << 2)); + writew_relaxed(val, uap->port.membase + uap->reg_lut[index >> 2]); +} + +static void pl011_writeb(struct uart_amba_port *uap, u8 val, int index) +{ + WARN_ON(index > (REG_NR << 2)); + writeb_relaxed(val, uap->port.membase + uap->reg_lut[index >> 2]); +} + /* * Reads up to 256 characters from the FIFO or until it's empty and * inserts them into the TTY layer. Returns the number of characters @@ -179,12 +240,12 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap) int fifotaken = 0; while (max_count--) { - status = readw(uap->port.membase + UART01x_FR); + status = pl011_readw(uap, UART01x_FR); if (status & UART01x_FR_RXFE) break; /* Take chars from the FIFO and update status */ - ch = readw(uap->port.membase + UART01x_DR) | + ch = pl011_readw(uap, UART01x_DR) | UART_DUMMY_DR_RX; flag = TTY_NORMAL; uap->port.icount.rx++; @@ -266,7 +327,7 @@ static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port * /* DMA is the sole user of the platform data right now */ struct amba_pl011_data *plat = dev_get_platdata(uap->port.dev); struct dma_slave_config tx_conf = { - .dst_addr = uap->port.mapbase + UART01x_DR, + .dst_addr = uap->port.mapbase + uap->reg_lut[UART01x_DR], .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, .direction = DMA_MEM_TO_DEV, .dst_maxburst = uap->fifosize >> 1, @@ -316,7 +377,7 @@ static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port * if (chan) { struct dma_slave_config rx_conf = { - .src_addr = uap->port.mapbase + UART01x_DR, + .src_addr = uap->port.mapbase + uap->reg_lut[UART01x_DR], .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, .direction = DMA_DEV_TO_MEM, .src_maxburst = uap->fifosize >> 2, @@ -461,7 +522,7 @@ static void pl011_dma_tx_callback(void *data) dmacr = uap->dmacr; uap->dmacr = dmacr & ~UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_writew(uap, uap->dmacr, UART011_DMACR); /* * If TX DMA was disabled, it means that we've stopped the DMA for @@ -485,7 +546,7 @@ static void pl011_dma_tx_callback(void *data) * have data pending to be sent. Re-enable the TX IRQ. */ uap->im |= UART011_TXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_writew(uap, uap->im, UART011_IMSC); } spin_unlock_irqrestore(&uap->port.lock, flags); } @@ -576,7 +637,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap) dma_dev->device_issue_pending(chan); uap->dmacr |= UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_writew(uap, uap->dmacr, UART011_DMACR); uap->dmatx.queued = true; /* @@ -612,9 +673,9 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap) */ if (uap->dmatx.queued) { uap->dmacr |= UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_writew(uap, uap->dmacr, UART011_DMACR); uap->im &= ~UART011_TXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_writew(uap, uap->im, UART011_IMSC); return true; } @@ -624,7 +685,7 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap) */ if (pl011_dma_tx_refill(uap) > 0) { uap->im &= ~UART011_TXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_writew(uap, uap->im, UART011_IMSC); return true; } return false; @@ -638,7 +699,7 @@ static inline void pl011_dma_tx_stop(struct uart_amba_port *uap) { if (uap->dmatx.queued) { uap->dmacr &= ~UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_writew(uap, uap->dmacr, UART011_DMACR); } } @@ -669,11 +730,10 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) uap->im |= UART011_TXIM; ret = false; } - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_writew(uap, uap->im, UART011_IMSC); } else if (!(uap->dmacr & UART011_TXDMAE)) { uap->dmacr |= UART011_TXDMAE; - writew(uap->dmacr, - uap->port.membase + UART011_DMACR); + pl011_writew(uap, uap->dmacr, UART011_DMACR); } return ret; } @@ -684,9 +744,9 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) */ dmacr = uap->dmacr; uap->dmacr &= ~UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_writew(uap, uap->dmacr, UART011_DMACR); - if (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) { + if (pl011_readw(uap, UART01x_FR) & UART01x_FR_TXFF) { /* * No space in the FIFO, so enable the transmit interrupt * so we know when there is space. Note that once we've @@ -695,13 +755,13 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) return false; } - writew(uap->port.x_char, uap->port.membase + UART01x_DR); + pl011_writew(uap, uap->port.x_char, UART01x_DR); uap->port.icount.tx++; uap->port.x_char = 0; /* Success - restore the DMA state */ uap->dmacr = dmacr; - writew(dmacr, uap->port.membase + UART011_DMACR); + pl011_writew(uap, dmacr, UART011_DMACR); return true; } @@ -729,7 +789,7 @@ __acquires(&uap->port.lock) DMA_TO_DEVICE); uap->dmatx.queued = false; uap->dmacr &= ~UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_writew(uap, uap->dmacr, UART011_DMACR); } } @@ -769,11 +829,11 @@ static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap) dma_async_issue_pending(rxchan); uap->dmacr |= UART011_RXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_writew(uap, uap->dmacr, UART011_DMACR); uap->dmarx.running = true; uap->im &= ~UART011_RXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_writew(uap, uap->im, UART011_IMSC); return 0; } @@ -831,8 +891,9 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap, */ if (dma_count == pending && readfifo) { /* Clear any error flags */ - writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS, - uap->port.membase + UART011_ICR); + pl011_writew(uap, + UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS, + UART011_ICR); /* * If we read all the DMA'd characters, and we had an @@ -880,7 +941,7 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap) /* Disable RX DMA - incoming data will wait in the FIFO */ uap->dmacr &= ~UART011_RXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_writew(uap, uap->dmacr, UART011_DMACR); uap->dmarx.running = false; pending = sgbuf->sg.length - state.residue; @@ -900,7 +961,7 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap) dev_dbg(uap->port.dev, "could not retrigger RX DMA job " "fall back to interrupt mode\n"); uap->im |= UART011_RXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_writew(uap, uap->im, UART011_IMSC); } } @@ -948,7 +1009,7 @@ static void pl011_dma_rx_callback(void *data) dev_dbg(uap->port.dev, "could not retrigger RX DMA job " "fall back to interrupt mode\n"); uap->im |= UART011_RXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_writew(uap, uap->im, UART011_IMSC); } } @@ -961,7 +1022,7 @@ static inline void pl011_dma_rx_stop(struct uart_amba_port *uap) { /* FIXME. Just disable the DMA enable */ uap->dmacr &= ~UART011_RXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_writew(uap, uap->dmacr, UART011_DMACR); } /* @@ -1005,7 +1066,7 @@ static void pl011_dma_rx_poll(unsigned long args) spin_lock_irqsave(&uap->port.lock, flags); pl011_dma_rx_stop(uap); uap->im |= UART011_RXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_writew(uap, uap->im, UART011_IMSC); spin_unlock_irqrestore(&uap->port.lock, flags); uap->dmarx.running = false; @@ -1064,7 +1125,7 @@ static void pl011_dma_startup(struct uart_amba_port *uap) skip_rx: /* Turn on DMA error (RX/TX will be enabled on demand) */ uap->dmacr |= UART011_DMAONERR; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_writew(uap, uap->dmacr, UART011_DMACR); /* * ST Micro variants has some specific dma burst threshold @@ -1072,8 +1133,9 @@ skip_rx: * be issued above/below 16 bytes. */ if (uap->vendor->dma_threshold) - writew(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16, - uap->port.membase + ST_UART011_DMAWM); + pl011_writew(uap, + ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16, + ST_UART011_DMAWM); if (uap->using_rx_dma) { if (pl011_dma_rx_trigger_dma(uap)) @@ -1098,12 +1160,12 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap) return; /* Disable RX and TX DMA */ - while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY) + while (pl011_readw(uap, UART01x_FR) & UART01x_FR_BUSY) barrier(); spin_lock_irq(&uap->port.lock); uap->dmacr &= ~(UART011_DMAONERR | UART011_RXDMAE | UART011_TXDMAE); - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_writew(uap, uap->dmacr, UART011_DMACR); spin_unlock_irq(&uap->port.lock); if (uap->using_tx_dma) { @@ -1204,7 +1266,7 @@ static void pl011_stop_tx(struct uart_port *port) container_of(port, struct uart_amba_port, port); uap->im &= ~UART011_TXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_writew(uap, uap->im, UART011_IMSC); pl011_dma_tx_stop(uap); } @@ -1215,7 +1277,7 @@ static void pl011_start_tx(struct uart_port *port) if (!pl011_dma_tx_start(uap)) { uap->im |= UART011_TXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_writew(uap, uap->im, UART011_IMSC); } } @@ -1226,7 +1288,7 @@ static void pl011_stop_rx(struct uart_port *port) uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM| UART011_PEIM|UART011_BEIM|UART011_OEIM); - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_writew(uap, uap->im, UART011_IMSC); pl011_dma_rx_stop(uap); } @@ -1237,7 +1299,7 @@ static void pl011_enable_ms(struct uart_port *port) container_of(port, struct uart_amba_port, port); uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_writew(uap, uap->im, UART011_IMSC); } static void pl011_rx_chars(struct uart_amba_port *uap) @@ -1257,7 +1319,7 @@ __acquires(&uap->port.lock) dev_dbg(uap->port.dev, "could not trigger RX DMA job " "fall back to interrupt mode again\n"); uap->im |= UART011_RXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_writew(uap, uap->im, UART011_IMSC); } else { #ifdef CONFIG_DMA_ENGINE /* Start Rx DMA poll */ @@ -1280,7 +1342,7 @@ static void pl011_tx_chars(struct uart_amba_port *uap) int count; if (uap->port.x_char) { - writew(uap->port.x_char, uap->port.membase + UART01x_DR); + pl011_writew(uap, uap->port.x_char, UART01x_DR); uap->port.icount.tx++; uap->port.x_char = 0; return; @@ -1296,7 +1358,7 @@ static void pl011_tx_chars(struct uart_amba_port *uap) count = uap->fifosize >> 1; do { - writew(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR); + pl011_writew(uap, xmit->buf[xmit->tail], UART01x_DR); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); uap->port.icount.tx++; if (uart_circ_empty(xmit)) @@ -1314,7 +1376,7 @@ static void pl011_modem_status(struct uart_amba_port *uap) { unsigned int status, delta; - status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + status = pl011_readw(uap, UART01x_FR) & UART01x_FR_MODEM_ANY; delta = status ^ uap->old_status; uap->old_status = status; @@ -1343,25 +1405,27 @@ static irqreturn_t pl011_int(int irq, void *dev_id) unsigned int dummy_read; spin_lock_irqsave(&uap->port.lock, flags); - status = readw(uap->port.membase + UART011_MIS); + status = pl011_readw(uap, UART011_MIS); if (status) { do { if (uap->vendor->cts_event_workaround) { /* workaround to make sure that all bits are unlocked.. */ - writew(0x00, uap->port.membase + UART011_ICR); + pl011_writew(uap, 0x00, UART011_ICR); /* * WA: introduce 26ns(1 uart clk) delay before W1C; * single apb access will incur 2 pclk(133.12Mhz) delay, * so add 2 dummy reads */ - dummy_read = readw(uap->port.membase + UART011_ICR); - dummy_read = readw(uap->port.membase + UART011_ICR); + dummy_read = pl011_readw(uap, + UART011_ICR); + dummy_read = pl011_readw(uap, + UART011_ICR); } - writew(status & ~(UART011_TXIS|UART011_RTIS| - UART011_RXIS), - uap->port.membase + UART011_ICR); + pl011_writew(uap, + status & ~(UART011_TXIS|UART011_RTIS|UART011_RXIS), + UART011_ICR); if (status & (UART011_RTIS|UART011_RXIS)) { if (pl011_dma_rx_running(uap)) @@ -1378,7 +1442,7 @@ static irqreturn_t pl011_int(int irq, void *dev_id) if (pass_counter-- == 0) break; - status = readw(uap->port.membase + UART011_MIS); + status = pl011_readw(uap, UART011_MIS); } while (status != 0); handled = 1; } @@ -1392,16 +1456,17 @@ static unsigned int pl011_tx_empty(struct uart_port *port) { struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); - unsigned int status = readw(uap->port.membase + UART01x_FR); + + unsigned int status = pl011_readw(uap, UART01x_FR); return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT; } static unsigned int pl011_get_mctrl(struct uart_port *port) { + unsigned int result = 0; struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); - unsigned int result = 0; - unsigned int status = readw(uap->port.membase + UART01x_FR); + unsigned int status = pl011_readw(uap, UART01x_FR); #define TIOCMBIT(uartbit, tiocmbit) \ if (status & uartbit) \ @@ -1421,7 +1486,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl) container_of(port, struct uart_amba_port, port); unsigned int cr; - cr = readw(uap->port.membase + UART011_CR); + cr = pl011_readw(uap, UART011_CR); #define TIOCMBIT(tiocmbit, uartbit) \ if (mctrl & tiocmbit) \ @@ -1441,7 +1506,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl) } #undef TIOCMBIT - writew(cr, uap->port.membase + UART011_CR); + pl011_writew(uap, cr, UART011_CR); } static void pl011_break_ctl(struct uart_port *port, int break_state) @@ -1452,12 +1517,12 @@ static void pl011_break_ctl(struct uart_port *port, int break_state) unsigned int lcr_h; spin_lock_irqsave(&uap->port.lock, flags); - lcr_h = readw(uap->port.membase + uap->lcrh_tx); + lcr_h = pl011_readw(uap, UART011_LCRH_TX); if (break_state == -1) lcr_h |= UART01x_LCRH_BRK; else lcr_h &= ~UART01x_LCRH_BRK; - writew(lcr_h, uap->port.membase + uap->lcrh_tx); + pl011_writew(uap, lcr_h, UART011_LCRH_TX); spin_unlock_irqrestore(&uap->port.lock, flags); } @@ -1467,9 +1532,8 @@ static void pl011_quiesce_irqs(struct uart_port *port) { struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); - unsigned char __iomem *regs = uap->port.membase; - writew(readw(regs + UART011_MIS), regs + UART011_ICR); + pl011_writew(uap, pl011_readw(uap, UART011_MIS), UART011_ICR); /* * There is no way to clear TXIM as this is "ready to transmit IRQ", so * we simply mask it. start_tx() will unmask it. @@ -1483,14 +1547,15 @@ static void pl011_quiesce_irqs(struct uart_port *port) * (including tx queue), so we're also fine with start_tx()'s caller * side. */ - writew(readw(regs + UART011_IMSC) & ~UART011_TXIM, regs + UART011_IMSC); + pl011_writew(uap, + pl011_readw(uap, UART011_IMSC) & ~UART011_TXIM, UART011_IMSC); } static int pl011_get_poll_char(struct uart_port *port) { + unsigned int status; struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); - unsigned int status; /* * The caller might need IRQs lowered, e.g. if used with KDB NMI @@ -1498,11 +1563,11 @@ static int pl011_get_poll_char(struct uart_port *port) */ pl011_quiesce_irqs(port); - status = readw(uap->port.membase + UART01x_FR); + status = pl011_readw(uap, UART01x_FR); if (status & UART01x_FR_RXFE) return NO_POLL_CHAR; - return readw(uap->port.membase + UART01x_DR); + return pl011_readw(uap, UART01x_DR); } static void pl011_put_poll_char(struct uart_port *port, @@ -1511,10 +1576,10 @@ static void pl011_put_poll_char(struct uart_port *port, struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); - while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) + while (pl011_readw(uap, UART01x_FR) & UART01x_FR_TXFF) barrier(); - writew(ch, uap->port.membase + UART01x_DR); + pl011_writew(uap, ch, UART01x_DR); } #endif /* CONFIG_CONSOLE_POLL */ @@ -1538,15 +1603,16 @@ static int pl011_hwinit(struct uart_port *port) uap->port.uartclk = clk_get_rate(uap->clk); /* Clear pending error and receive interrupts */ - writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS | - UART011_RTIS | UART011_RXIS, uap->port.membase + UART011_ICR); + pl011_writew(uap, + UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS | + UART011_RTIS | UART011_RXIS, UART011_ICR); /* * Save interrupts enable mask, and enable RX interrupts in case if * the interrupt is used for NMI entry. */ - uap->im = readw(uap->port.membase + UART011_IMSC); - writew(UART011_RTIM | UART011_RXIM, uap->port.membase + UART011_IMSC); + uap->im = pl011_readw(uap, UART011_IMSC); + pl011_writew(uap, UART011_RTIM | UART011_RXIM, UART011_IMSC); if (dev_get_platdata(uap->port.dev)) { struct amba_pl011_data *plat; @@ -1560,16 +1626,16 @@ static int pl011_hwinit(struct uart_port *port) static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h) { - writew(lcr_h, uap->port.membase + uap->lcrh_rx); - if (uap->lcrh_rx != uap->lcrh_tx) { + pl011_writew(uap, lcr_h, UART011_LCRH_TX); + if (uap->reg_lut[UART011_LCRH_TX] != uap->reg_lut[UART011_LCRH_RX]) { int i; /* * Wait 10 PCLKs before writing LCRH_TX register, * to get this delay write read only register 10 times */ for (i = 0; i < 10; ++i) - writew(0xff, uap->port.membase + UART011_MIS); - writew(lcr_h, uap->port.membase + uap->lcrh_tx); + pl011_writew(uap, 0xff, UART011_MIS); + pl011_writew(uap, lcr_h, UART011_LCRH_TX); } } @@ -1584,7 +1650,7 @@ static int pl011_startup(struct uart_port *port) if (retval) goto clk_dis; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_writew(uap, uap->im, UART011_IMSC); /* * Allocate the IRQ @@ -1593,7 +1659,7 @@ static int pl011_startup(struct uart_port *port) if (retval) goto clk_dis; - writew(uap->vendor->ifls, uap->port.membase + UART011_IFLS); + pl011_writew(uap, uap->vendor->ifls, UART011_IFLS); /* * Provoke TX FIFO interrupt into asserting. Taking care to preserve @@ -1602,34 +1668,34 @@ static int pl011_startup(struct uart_port *port) */ spin_lock_irq(&uap->port.lock); - fbrd = readw(uap->port.membase + UART011_FBRD); - ibrd = readw(uap->port.membase + UART011_IBRD); - lcr_h = readw(uap->port.membase + uap->lcrh_rx); + fbrd = pl011_readw(uap, UART011_FBRD); + ibrd = pl011_readw(uap, UART011_IBRD); + lcr_h = pl011_readw(uap, UART011_LCRH_RX); cr = UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_LBE; - writew(cr, uap->port.membase + UART011_CR); - writew(0, uap->port.membase + UART011_FBRD); - writew(1, uap->port.membase + UART011_IBRD); + pl011_writew(uap, cr, UART011_CR); + pl011_writew(uap, 0, UART011_FBRD); + pl011_writew(uap, 1, UART011_IBRD); pl011_write_lcr_h(uap, 0); - writew(0, uap->port.membase + UART01x_DR); - while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY) + pl011_writew(uap, 0, UART01x_DR); + while (pl011_readw(uap, UART01x_FR) & UART01x_FR_BUSY) barrier(); - writew(fbrd, uap->port.membase + UART011_FBRD); - writew(ibrd, uap->port.membase + UART011_IBRD); + pl011_writew(uap, fbrd, UART011_FBRD); + pl011_writew(uap, ibrd, UART011_IBRD); pl011_write_lcr_h(uap, lcr_h); /* restore RTS and DTR */ cr = uap->old_cr & (UART011_CR_RTS | UART011_CR_DTR); cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE; - writew(cr, uap->port.membase + UART011_CR); + pl011_writew(uap, cr, UART011_CR); spin_unlock_irq(&uap->port.lock); /* * initialise the old status of the modem signals */ - uap->old_status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + uap->old_status = pl011_readw(uap, UART01x_FR) & UART01x_FR_MODEM_ANY; /* Startup DMA */ pl011_dma_startup(uap); @@ -1641,29 +1707,33 @@ static int pl011_startup(struct uart_port *port) */ spin_lock_irq(&uap->port.lock); /* Clear out any spuriously appearing RX interrupts */ - writew(UART011_RTIS | UART011_RXIS, - uap->port.membase + UART011_ICR); + pl011_writew(uap, UART011_RTIS | UART011_RXIS, UART011_ICR); uap->im = UART011_RTIM; if (!pl011_dma_rx_running(uap)) uap->im |= UART011_RXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_writew(uap, uap->im, UART011_IMSC); spin_unlock_irq(&uap->port.lock); return 0; - clk_dis: +clk_dis: clk_disable_unprepare(uap->clk); return retval; } -static void pl011_shutdown_channel(struct uart_amba_port *uap, - unsigned int lcrh) +static void pl011_shutdown_channel(struct uart_amba_port *uap) { - unsigned long val; + unsigned long val; + + val = pl011_readw(uap, UART011_LCRH_RX); + val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN); + pl011_writew(uap, val, UART011_LCRH_RX); - val = readw(uap->port.membase + lcrh); - val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN); - writew(val, uap->port.membase + lcrh); + if (uap->reg_lut[UART011_LCRH_RX] != uap->reg_lut[UART011_LCRH_TX]) { + val = pl011_readw(uap, UART011_LCRH_TX); + val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN); + pl011_writew(uap, val, UART011_LCRH_TX); + } } static void pl011_shutdown(struct uart_port *port) @@ -1677,8 +1747,8 @@ static void pl011_shutdown(struct uart_port *port) */ spin_lock_irq(&uap->port.lock); uap->im = 0; - writew(uap->im, uap->port.membase + UART011_IMSC); - writew(0xffff, uap->port.membase + UART011_ICR); + pl011_writew(uap, uap->im, UART011_IMSC); + pl011_writew(uap, 0xffff, UART011_ICR); spin_unlock_irq(&uap->port.lock); pl011_dma_shutdown(uap); @@ -1696,19 +1766,17 @@ static void pl011_shutdown(struct uart_port *port) */ uap->autorts = false; spin_lock_irq(&uap->port.lock); - cr = readw(uap->port.membase + UART011_CR); + cr = pl011_readw(uap, UART011_CR); uap->old_cr = cr; cr &= UART011_CR_RTS | UART011_CR_DTR; cr |= UART01x_CR_UARTEN | UART011_CR_TXE; - writew(cr, uap->port.membase + UART011_CR); + pl011_writew(uap, cr, UART011_CR); spin_unlock_irq(&uap->port.lock); /* * disable break condition and fifos */ - pl011_shutdown_channel(uap, uap->lcrh_rx); - if (uap->lcrh_rx != uap->lcrh_tx) - pl011_shutdown_channel(uap, uap->lcrh_tx); + pl011_shutdown_channel(uap); /* * Shut down the clock producer @@ -1825,8 +1893,8 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, pl011_enable_ms(port); /* first, disable everything */ - old_cr = readw(port->membase + UART011_CR); - writew(0, port->membase + UART011_CR); + old_cr = pl011_readw(uap, UART011_CR); + pl011_writew(uap, 0, UART011_CR); if (termios->c_cflag & CRTSCTS) { if (old_cr & UART011_CR_RTS) @@ -1859,8 +1927,8 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, quot -= 2; } /* Set baud rate */ - writew(quot & 0x3f, port->membase + UART011_FBRD); - writew(quot >> 6, port->membase + UART011_IBRD); + pl011_writew(uap, quot & 0x3f, UART011_FBRD); + pl011_writew(uap, quot >> 6, UART011_IBRD); /* * ----------v----------v----------v----------v----- @@ -1869,7 +1937,7 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, * ----------^----------^----------^----------^----- */ pl011_write_lcr_h(uap, lcr_h); - writew(old_cr, port->membase + UART011_CR); + pl011_writew(uap, old_cr, UART011_CR); spin_unlock_irqrestore(&port->lock, flags); } @@ -1955,12 +2023,9 @@ static struct uart_amba_port *amba_ports[UART_NR]; static void pl011_console_putchar(struct uart_port *port, int ch) { - struct uart_amba_port *uap = - container_of(port, struct uart_amba_port, port); - - while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) + while (pl011_readw(uap, UART01x_FR) & UART01x_FR_TXFF) barrier(); - writew(ch, uap->port.membase + UART01x_DR); + pl011_writew(uap, ch, UART01x_DR); } static void @@ -1984,10 +2049,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count) /* * First save the CR then disable the interrupts */ - old_cr = readw(uap->port.membase + UART011_CR); + old_cr = pl011_readw(uap, UART011_CR); new_cr = old_cr & ~UART011_CR_CTSEN; new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE; - writew(new_cr, uap->port.membase + UART011_CR); + pl011_writew(uap, new_cr, UART011_CR); uart_console_write(&uap->port, s, count, pl011_console_putchar); @@ -1996,9 +2061,9 @@ pl011_console_write(struct console *co, const char *s, unsigned int count) * and restore the TCR */ do { - status = readw(uap->port.membase + UART01x_FR); + status = pl011_readw(uap, UART01x_FR); } while (status & UART01x_FR_BUSY); - writew(old_cr, uap->port.membase + UART011_CR); + pl011_writew(uap, old_cr, UART011_CR); if (locked) spin_unlock(&uap->port.lock); @@ -2011,10 +2076,10 @@ static void __init pl011_console_get_options(struct uart_amba_port *uap, int *baud, int *parity, int *bits) { - if (readw(uap->port.membase + UART011_CR) & UART01x_CR_UARTEN) { + if (pl011_readw(uap, UART011_CR) & UART01x_CR_UARTEN) { unsigned int lcr_h, ibrd, fbrd; - lcr_h = readw(uap->port.membase + uap->lcrh_tx); + lcr_h = pl011_readw(uap, UART011_LCRH_TX); *parity = 'n'; if (lcr_h & UART01x_LCRH_PEN) { @@ -2029,13 +2094,13 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud, else *bits = 8; - ibrd = readw(uap->port.membase + UART011_IBRD); - fbrd = readw(uap->port.membase + UART011_FBRD); + ibrd = pl011_readw(uap, UART011_IBRD); + fbrd = pl011_readw(uap, UART011_FBRD); *baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd); if (uap->vendor->oversampling) { - if (readw(uap->port.membase + UART011_CR) + if (pl011_readw(uap, UART011_CR) & ST_UART011_CR_OVSFACT) *baud *= 2; } @@ -2102,10 +2167,13 @@ static struct console amba_console = { static void pl011_putc(struct uart_port *port, int c) { - while (readl(port->membase + UART01x_FR) & UART01x_FR_TXFF) + struct uart_amba_port *uap = + container_of(port, struct uart_amba_port, port); + + while (pl011_readw(uap, UART01x_FR) & UART01x_FR_TXFF) ; - writeb(c, port->membase + UART01x_DR); - while (readl(port->membase + UART01x_FR) & UART01x_FR_BUSY) + pl011_writeb(uap, c, UART01x_DR); + while (pl011_readw(uap, UART01x_FR) & UART01x_FR_BUSY) ; } @@ -2204,9 +2272,8 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) if (IS_ERR(uap->clk)) return PTR_ERR(uap->clk); + uap->reg_lut = vendor->reg_lut; uap->vendor = vendor; - uap->lcrh_rx = vendor->lcrh_rx; - uap->lcrh_tx = vendor->lcrh_tx; uap->old_cr = 0; uap->fifosize = vendor->get_fifosize(dev); uap->port.dev = &dev->dev; @@ -2221,8 +2288,8 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) pl011_dma_probe(&dev->dev, uap); /* Ensure interrupts from this UART are masked and cleared */ - writew(0, uap->port.membase + UART011_IMSC); - writew(0xffff, uap->port.membase + UART011_ICR); + pl011_writew(uap, 0, UART011_IMSC); + pl011_writew(uap, 0xffff, UART011_ICR); snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev)); diff --git a/include/linux/amba/serial.h b/include/linux/amba/serial.h index 0ddb5c0..1fe1549 100644 --- a/include/linux/amba/serial.h +++ b/include/linux/amba/serial.h @@ -42,11 +42,13 @@ #define UART01x_FR 0x18 /* Flag register (Read only). */ #define UART010_IIR 0x1C /* Interrupt identification register (Read). */ #define UART010_ICR 0x1C /* Interrupt clear register (Write). */ +#define UART011_LCRH_RX 0x1C /* Rx line control register. */ #define ST_UART011_LCRH_RX 0x1C /* Rx line control register. */ #define UART01x_ILPR 0x20 /* IrDA low power counter register. */ #define UART011_IBRD 0x24 /* Integer baud rate divisor register. */ #define UART011_FBRD 0x28 /* Fractional baud rate divisor register. */ #define UART011_LCRH 0x2c /* Line control register. */ +#define UART011_LCRH_TX 0x2c /* Line control register. */ #define ST_UART011_LCRH_TX 0x2c /* Tx Line control register. */ #define UART011_CR 0x30 /* Control register. */ #define UART011_IFLS 0x34 /* Interrupt fifo level select. */ @@ -75,6 +77,8 @@ #define UART01x_RSR_PE 0x02 #define UART01x_RSR_FE 0x01 +#define UART011_FR_TXBUSY 0x100 +#define UART011_FR_RXBUSY 0x200 #define UART011_FR_RI 0x100 #define UART011_FR_TXFE 0x080 #define UART011_FR_RXFF 0x040