diff mbox series

arm64: freescale/imx8mp-evk.dts: reorder nodes alphabetically

Message ID 20210707105309.1693138-1-u.kleine-koenig@pengutronix.de
State New
Headers show
Series arm64: freescale/imx8mp-evk.dts: reorder nodes alphabetically | expand

Commit Message

Uwe Kleine-König July 7, 2021, 10:53 a.m. UTC
The nodes after the root nodes are supposed to be ordered
alphabetically. So move &flexcan1, &flexcan2 and &pinctrl to their
proper place.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm64/boot/dts/freescale/imx8mp-evk.dts | 144 +++++++++----------
 1 file changed, 72 insertions(+), 72 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index 7b99fad6e4d6..4122323d3ea3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -67,20 +67,6 @@  reg_usdhc2_vmmc: regulator-usdhc2 {
 	};
 };
 
-&flexcan1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan1>;
-	xceiver-supply = <&reg_can1_stby>;
-	status = "okay";
-};
-
-&flexcan2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_flexcan2>;
-	xceiver-supply = <&reg_can2_stby>;
-	status = "disabled";/* can2 pin conflict with pdm */
-};
-
 &eqos {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_eqos>;
@@ -124,6 +110,20 @@  ethphy1: ethernet-phy@1 {
 	};
 };
 
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_can1_stby>;
+	status = "okay";
+};
+
+&flexcan2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	xceiver-supply = <&reg_can2_stby>;
+	status = "disabled";/* can2 pin conflict with pdm */
+};
+
 &i2c1 {
 	clock-frequency = <400000>;
 	pinctrl-names = "default";
@@ -224,64 +224,6 @@  pca6416: gpio@20 {
 	};
 };
 
-&snvs_pwrkey {
-	status = "okay";
-};
-
-&uart2 {
-	/* console */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2>;
-	status = "okay";
-};
-
-&usb3_phy1 {
-	status = "okay";
-};
-
-&usb3_1 {
-	status = "okay";
-};
-
-&usb_dwc3_1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb1_vbus>;
-	dr_mode = "host";
-	status = "okay";
-};
-
-&usdhc2 {
-	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
-	assigned-clock-rates = <400000000>;
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
-	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
-	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
-	vmmc-supply = <&reg_usdhc2_vmmc>;
-	bus-width = <4>;
-	status = "okay";
-};
-
-&usdhc3 {
-	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
-	assigned-clock-rates = <400000000>;
-	pinctrl-names = "default", "state_100mhz", "state_200mhz";
-	pinctrl-0 = <&pinctrl_usdhc3>;
-	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
-
 &iomuxc {
 	pinctrl_eqos: eqosgrp {
 		fsl,pins = <
@@ -490,3 +432,61 @@  MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0x166
 		>;
 	};
 };
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 {
+	/* console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1_vbus>;
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};