@@ -23,7 +23,7 @@
#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include <linux/spinlock.h>
-#include <linux/clk.h>
+#include <linux/pm_runtime.h>
#include <linux/of.h>
#include <linux/coresight.h>
#include <linux/amba/bus.h>
@@ -104,7 +104,6 @@ enum tmc_mem_intf_width {
* @dev: the device entity associated to this component.
* @csdev: component vitals needed by the framework.
* @miscdev: specifics to handle "/dev/xyz.tmc" entry.
- * @clk: the clock this component is associated to.
* @spinlock: only one at a time pls.
* @read_count: manages preparation of buffer for reading.
* @buf: area of memory where trace data get sent.
@@ -120,7 +119,6 @@ struct tmc_drvdata {
struct device *dev;
struct coresight_device *csdev;
struct miscdevice miscdev;
- struct clk *clk;
spinlock_t spinlock;
int read_count;
bool reading;
@@ -242,17 +240,14 @@ static void tmc_etf_enable_hw(struct tmc_drvdata *drvdata)
static int tmc_enable(struct tmc_drvdata *drvdata, enum tmc_mode mode)
{
- int ret;
unsigned long flags;
- ret = clk_prepare_enable(drvdata->clk);
- if (ret)
- return ret;
+ pm_runtime_get_sync(drvdata->dev);
spin_lock_irqsave(&drvdata->spinlock, flags);
if (drvdata->reading) {
spin_unlock_irqrestore(&drvdata->spinlock, flags);
- clk_disable_unprepare(drvdata->clk);
+ pm_runtime_put(drvdata->dev);
return -EBUSY;
}
@@ -386,7 +381,7 @@ out:
drvdata->enable = false;
spin_unlock_irqrestore(&drvdata->spinlock, flags);
- clk_disable_unprepare(drvdata->clk);
+ pm_runtime_put(drvdata->dev);
dev_info(drvdata->dev, "TMC disabled\n");
}
@@ -700,11 +695,6 @@ static int tmc_probe(struct amba_device *adev, const struct amba_id *id)
spin_lock_init(&drvdata->spinlock);
- drvdata->clk = adev->pclk;
- ret = clk_prepare_enable(drvdata->clk);
- if (ret)
- return ret;
-
devid = readl_relaxed(drvdata->base + CORESIGHT_DEVID);
drvdata->config_type = BMVAL(devid, 6, 7);
@@ -719,7 +709,7 @@ static int tmc_probe(struct amba_device *adev, const struct amba_id *id)
drvdata->size = readl_relaxed(drvdata->base + TMC_RSZ) * 4;
}
- clk_disable_unprepare(drvdata->clk);
+ pm_runtime_put(&adev->dev);
if (drvdata->config_type == TMC_CONFIG_TYPE_ETR) {
drvdata->vaddr = dma_alloc_coherent(dev, drvdata->size,
This uses runtime PM to manage the PCLK ("amba_pclk") instead of screwing around with the framework by going in and taking a copy from the amba device. The amba bus core will uprepare and disable the clock when the device is unused when CONFIG_PM is selected, else the clock will be always on. Prior to this patch, as the AMBA primecell bus code enables the PCLK, it would be left on after probe as the clk_prepare_enable() and clk_disable_unprepare() was called and thus just increase and decreas the refcount by one, without it reaching zero and actually disabling the clock. Now the runtime PM callbacks will make sure the PCLK is properly disabled after probe. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v1->v2: - Rebased on the coresight git tree. - Added Ulf's review tag. --- drivers/hwtracing/coresight/coresight-tmc.c | 20 +++++--------------- 1 file changed, 5 insertions(+), 15 deletions(-)