| Message ID | 20210714121116.v2.5.I933f1532d7a1b2910843a9644c86a7d94a4b44e1@changeid |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Add support to the mmsys driver to be a reset controller | expand |
On Wed, 14 Jul 2021 12:11:39 +0200, Enric Balletbo i Serra wrote: > Reset the DSI hardware is needed to prevent different settings between > the bootloader and the kernel. > > While here, also remove the undocumented and also not used > 'mediatek,syscon-dsi' property. > > Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> > --- > > (no changes since v1) > > arch/arm64/boot/dts/mediatek/mt8183.dtsi | 3 ++- > include/dt-bindings/reset/mt8183-resets.h | 3 +++ > 2 files changed, 5 insertions(+), 1 deletion(-) > Acked-by: Rob Herring <robh@kernel.org>
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi index 4ef0b5b23047..7ae108f8ba89 100644 --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi @@ -1251,6 +1251,7 @@ mmsys: syscon@14000000 { compatible = "mediatek,mt8183-mmsys", "syscon"; reg = <0 0x14000000 0 0x1000>; #clock-cells = <1>; + #reset-cells = <1>; mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>, <&gce 1 CMDQ_THR_PRIO_HIGHEST>; mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>; @@ -1365,11 +1366,11 @@ dsi0: dsi@14014000 { reg = <0 0x14014000 0 0x1000>; interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_LOW>; power-domains = <&spm MT8183_POWER_DOMAIN_DISP>; - mediatek,syscon-dsi = <&mmsys 0x140>; clocks = <&mmsys CLK_MM_DSI0_MM>, <&mmsys CLK_MM_DSI0_IF>, <&mipi_tx0>; clock-names = "engine", "digital", "hs"; + resets = <&mmsys MT8183_MMSYS_SW0_RST_B_DISP_DSI0>; phys = <&mipi_tx0>; phy-names = "dphy"; }; diff --git a/include/dt-bindings/reset/mt8183-resets.h b/include/dt-bindings/reset/mt8183-resets.h index a1bbd41e0d12..48c5d2de0a38 100644 --- a/include/dt-bindings/reset/mt8183-resets.h +++ b/include/dt-bindings/reset/mt8183-resets.h @@ -80,6 +80,9 @@ #define MT8183_INFRACFG_SW_RST_NUM 128 +/* MMSYS resets */ +#define MT8183_MMSYS_SW0_RST_B_DISP_DSI0 25 + #define MT8183_TOPRGU_MM_SW_RST 1 #define MT8183_TOPRGU_MFG_SW_RST 2 #define MT8183_TOPRGU_VENC_SW_RST 3
Reset the DSI hardware is needed to prevent different settings between the bootloader and the kernel. While here, also remove the undocumented and also not used 'mediatek,syscon-dsi' property. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> --- (no changes since v1) arch/arm64/boot/dts/mediatek/mt8183.dtsi | 3 ++- include/dt-bindings/reset/mt8183-resets.h | 3 +++ 2 files changed, 5 insertions(+), 1 deletion(-)