diff mbox series

[v2,03/10] dt-bindings: remoteproc: qcom: Update Q6V5 Modem PIL binding

Message ID 1626775980-28637-4-git-send-email-sibis@codeaurora.org
State Superseded
Headers show
Series Add Modem support on SC7280 SoCs | expand

Commit Message

Sibi Sankar July 20, 2021, 10:12 a.m. UTC
Add a new modem compatible string for QTI SC7280 SoCs and introduce the
"qcom,ext-regs" and "qcom,qaccept-regs" properties needed by the modem
sub-system running on SC7280 SoCs.

Signed-off-by: Sibi Sankar <sibis@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
---

v2:
 * Misc. typos. [Matthias]

 .../devicetree/bindings/remoteproc/qcom,q6v5.txt   | 32 ++++++++++++++++++++--
 1 file changed, 30 insertions(+), 2 deletions(-)

Comments

Stephen Boyd July 21, 2021, 5:39 a.m. UTC | #1
Quoting Sibi Sankar (2021-07-20 03:12:53)
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt

> index 494257010629..bc1394f5d677 100644

> --- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt

> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt

> @@ -198,6 +205,9 @@ For the compatible string below the following supplies are required:

>         Definition: a phandle reference to a syscon representing TCSR followed

>                     by the three offsets within syscon for q6, modem and nc

>                     halt registers.

> +                   a phandle reference to a syscon representing TCSR followed

> +                   by the four offsets within syscon for q6, modem, nc and vq6

> +                   halt registers on SC7280 SoCs.


This seems to be duplicated? Maybe it should be combined with the
previous sentence and sc7280 called out?

>

>  For the compatible strings below the following phandle references are required:

>    "qcom,sc7180-mss-pil"
Sibi Sankar July 21, 2021, 5:04 p.m. UTC | #2
Hey Stephen,

Thanks for taking time to review
the series.

On 2021-07-21 11:09, Stephen Boyd wrote:
> Quoting Sibi Sankar (2021-07-20 03:12:53)
>> diff --git 
>> a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt 
>> b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
>> index 494257010629..bc1394f5d677 100644
>> --- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
>> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
>> @@ -198,6 +205,9 @@ For the compatible string below the following 
>> supplies are required:
>>         Definition: a phandle reference to a syscon representing TCSR 
>> followed
>>                     by the three offsets within syscon for q6, modem 
>> and nc
>>                     halt registers.
>> +                   a phandle reference to a syscon representing TCSR 
>> followed
>> +                   by the four offsets within syscon for q6, modem, 
>> nc and vq6
>> +                   halt registers on SC7280 SoCs.
> 
> This seems to be duplicated? Maybe it should be combined with the
> previous sentence and sc7280 called out?

yeah noticed ^^ but that's the style
we've maintained till now. This
would get cleanup up when I do the
yaml conversion after the series
lands.

> 
>> 
>>  For the compatible strings below the following phandle references are 
>> required:
>>    "qcom,sc7180-mss-pil"
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
index 494257010629..bc1394f5d677 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt
@@ -15,6 +15,7 @@  on the Qualcomm Hexagon core.
 		    "qcom,msm8996-mss-pil"
 		    "qcom,msm8998-mss-pil"
 		    "qcom,sc7180-mss-pil"
+		    "qcom,sc7280-mss-pil"
 		    "qcom,sdm845-mss-pil"
 
 - reg:
@@ -47,6 +48,7 @@  on the Qualcomm Hexagon core.
 	qcom,msm8996-mss-pil:
 	qcom,msm8998-mss-pil:
 	qcom,sc7180-mss-pil:
+	qcom,sc7280-mss-pil:
 	qcom,sdm845-mss-pil:
 		    must be "wdog", "fatal", "ready", "handover", "stop-ack",
 		    "shutdown-ack"
@@ -87,6 +89,8 @@  on the Qualcomm Hexagon core.
 	qcom,sc7180-mss-pil:
 		    must be "iface", "bus", "xo", "snoc_axi", "mnoc_axi",
 		    "nav"
+	qcom,sc7280-mss-pil:
+		    must be "iface", "xo", "snoc_axi", "offline"
 	qcom,sdm845-mss-pil:
 		    must be "iface", "bus", "mem", "xo", "gpll0_mss",
 		    "snoc_axi", "mnoc_axi", "prng"
@@ -98,7 +102,7 @@  on the Qualcomm Hexagon core.
 		    reference to the list of 3 reset-controllers for the
 		    wcss sub-system
 		    reference to the list of 2 reset-controllers for the modem
-		    sub-system on SC7180, SDM845 SoCs
+		    sub-system on SC7180, SC7280, SDM845 SoCs
 
 - reset-names:
 	Usage: required
@@ -107,7 +111,7 @@  on the Qualcomm Hexagon core.
 		    must be "wcss_aon_reset", "wcss_reset", "wcss_q6_reset"
 		    for the wcss sub-system
 		    must be "mss_restart", "pdc_reset" for the modem
-		    sub-system on SC7180, SDM845 SoCs
+		    sub-system on SC7180, SC7280, SDM845 SoCs
 
 For devices where the mba and mpss sub-nodes are not specified, mba/mpss region
 should be referenced as follows:
@@ -173,6 +177,9 @@  For the compatible string below the following supplies are required:
 	qcom,msm8998-mss-pil:
 		    must be "cx", "mx"
 	qcom,sc7180-mss-pil:
+		    must be "cx", "mx", "mss"
+	qcom,sc7280-mss-pil:
+		    must be "cx", "mss"
 	qcom,sdm845-mss-pil:
 		    must be "cx", "mx", "mss"
 
@@ -198,6 +205,9 @@  For the compatible string below the following supplies are required:
 	Definition: a phandle reference to a syscon representing TCSR followed
 		    by the three offsets within syscon for q6, modem and nc
 		    halt registers.
+		    a phandle reference to a syscon representing TCSR followed
+		    by the four offsets within syscon for q6, modem, nc and vq6
+		    halt registers on SC7280 SoCs.
 
 For the compatible strings below the following phandle references are required:
   "qcom,sc7180-mss-pil"
@@ -208,6 +218,24 @@  For the compatible strings below the following phandle references are required:
 		    by the offset within syscon for conn_box_spare0 register
 		    used by the modem sub-system running on SC7180 SoC.
 
+For the compatible strings below the following phandle references are required:
+  "qcom,sc7280-mss-pil"
+- qcom,ext-regs:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: two phandle references to syscons representing TCSR_REG and
+		    TCSR register space followed by the two offsets within the syscon
+		    to force_clk_en/rscc_disable and axim1_clk_off/crypto_clk_off
+		    registers respectively.
+
+- qcom,qaccept-regs:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: a phandle reference to a syscon representing TCSR followed
+		    by the three offsets within syscon for mdm, cx and axi
+		    qaccept registers used by the modem sub-system running on
+		    SC7280 SoC.
+
 The Hexagon node must contain iommus property as described in ../iommu/iommu.txt
 on platforms which do not have TrustZone.