diff mbox series

[V2,3/5] dt-bindings: gpio: Add bindings for gpio-virtio

Message ID 3257b21c1179b11a5c62a95e138735f2443c90aa.1626947324.git.viresh.kumar@linaro.org
State Superseded
Headers show
Series virtio: Add virtio-device bindings | expand

Commit Message

Viresh Kumar July 22, 2021, 9:56 a.m. UTC 
This patch adds binding for virtio GPIO controller, it is based on
virtio-device bindings.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 .../devicetree/bindings/gpio/gpio-virtio.yaml | 60 +++++++++++++++++++
 1 file changed, 60 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/gpio-virtio.yaml
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/gpio/gpio-virtio.yaml b/Documentation/devicetree/bindings/gpio/gpio-virtio.yaml
new file mode 100644
index 000000000000..96108cfb7a08
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-virtio.yaml
@@ -0,0 +1,60 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-virtio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Virtio GPIO controller
+
+maintainers:
+  - Viresh Kumar <viresh.kumar@linaro.org>
+
+allOf:
+  - $ref: /schemas/gpio/gpio.yaml#
+  - $ref: /schemas/virtio/virtio-device.yaml#
+
+description:
+  Virtio GPIO controller, see /schemas/virtio/virtio-device.yaml for more
+  details.
+
+properties:
+  $nodename:
+    pattern: '^gpio-virtio(-[a-z0-9]+)?$'
+
+  compatible:
+    const: virtio,29
+
+  gpio-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+
+required:
+  - compatible
+  - gpio-controller
+  - "#gpio-cells"
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    virtio@3000 {
+        compatible = "virtio,mmio";
+        reg = <0x3000 0x100>;
+        interrupts = <41>;
+
+        gpio: gpio-virtio {
+            compatible = "virtio,29";
+            gpio-controller;
+            #gpio-cells = <2>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+        };
+    };
+
+...