diff mbox series

[v2,8/9] tools: mkeficapsule: allow for specifying GUID explicitly

Message ID 20210727091054.512050-9-takahiro.akashi@linaro.org
State New
Headers show
Series efi_loader: capsule: improve capsule authentication support | expand

Commit Message

AKASHI Takahiro July 27, 2021, 9:10 a.m. UTC
The existing options, "--fit" and "--raw," are only used to put a proper
GUID in a capsule header, where GUID identifies a particular FMP (Firmware
Management Protocol) driver which then would handle the firmware binary in
a capsule. In fact, mkeficapsule does the exact same job in creating
a capsule file whatever the firmware binary type is.

To prepare for the future extension, the command syntax will be a bit
modified to allow users to specify arbitrary GUID for their own FMP driver.
OLD:
   [--fit <image> | --raw <image>] <capsule file>
NEW:
   [--fit | --raw | --guid <guid-string>] <image> <capsule file>

Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>

---
 doc/mkeficapsule.1   | 19 ++++++++++++------
 tools/mkeficapsule.c | 46 +++++++++++++++++++++++++++-----------------
 2 files changed, 41 insertions(+), 24 deletions(-)

-- 
2.31.0
diff mbox series

Patch

diff --git a/doc/mkeficapsule.1 b/doc/mkeficapsule.1
index 7c2341160ea4..ab2aa3719744 100644
--- a/doc/mkeficapsule.1
+++ b/doc/mkeficapsule.1
@@ -5,7 +5,7 @@  mkeficapsule \- Generate EFI capsule file for U-Boot
 
 .SH SYNOPSIS
 .B mkeficapsule
-.RB [\fIoptions\fP] " \fIcapsule-file\fP"
+.RB [\fIoptions\fP] " \fIimage-blob\fP \fIcapsule-file\fP"
 
 .SH "DESCRIPTION"
 The
@@ -21,7 +21,7 @@  Optionally, a capsule file can be signed with a given private key.
 In this case, the update will be authenticated by verifying the signature
 before applying.
 
-\fBmkeficapsule\fP supports two different format of image files:
+\fBmkeficapsule\fP takes any type of image files, including:
 .TP
 .I raw image
 format is a single binary blob of any type of firmware.
@@ -33,15 +33,22 @@  is the same as used in the new \fIuImage\fP format and allows for
 multiple binary blobs in a single capsule file.
 This type of image file can be generated by \fBmkimage\fP.
 
+If you want to use other types than above two, you should explicitly
+specify a guid for the FMP driver.
+
 .SH "OPTIONS"
 
 .TP
-.BI "-f, --fit \fIfit-image-file\fP"
-Specify a FIT image file
+.BI "-f, --fit
+Indicate that the blob is a FIT image file
+
+.TP
+.BI "-r, --raw
+Indicate that the blob is a raw image file
 
 .TP
-.BI "-r, --raw \fIraw-image-file\fP"
-Specify a raw image file
+.BI "-g, --guid \fIguid-string\fP"
+Specify guid for image blob type
 
 .TP
 .BI "-i, --index \fIindex\fP"
diff --git a/tools/mkeficapsule.c b/tools/mkeficapsule.c
index 798706c7b5f7..8ac1811c68bd 100644
--- a/tools/mkeficapsule.c
+++ b/tools/mkeficapsule.c
@@ -14,7 +14,7 @@ 
 
 #include <sys/stat.h>
 #include <sys/types.h>
-
+#include <uuid/uuid.h>
 #include <linux/kconfig.h>
 #ifdef CONFIG_TOOLS_LIBCRYPTO
 #include <openssl/asn1.h>
@@ -51,14 +51,15 @@  efi_guid_t efi_guid_image_type_uboot_raw =
 efi_guid_t efi_guid_cert_type_pkcs7 = EFI_CERT_TYPE_PKCS7_GUID;
 
 #ifdef CONFIG_TOOLS_LIBCRYPTO
-static const char *opts_short = "f:r:i:I:v:p:c:m:dh";
+static const char *opts_short = "frg:i:I:v:p:c:m:dh";
 #else
-static const char *opts_short = "f:r:i:I:v:h";
+static const char *opts_short = "frg:i:I:v:h";
 #endif
 
 static struct option options[] = {
-	{"fit", required_argument, NULL, 'f'},
-	{"raw", required_argument, NULL, 'r'},
+	{"fit", no_argument, NULL, 'f'},
+	{"raw", no_argument, NULL, 'r'},
+	{"guid", required_argument, NULL, 'g'},
 	{"index", required_argument, NULL, 'i'},
 	{"instance", required_argument, NULL, 'I'},
 #ifdef CONFIG_TOOLS_LIBCRYPTO
@@ -73,11 +74,12 @@  static struct option options[] = {
 
 static void print_usage(void)
 {
-	printf("Usage: %s [options] <output file>\n"
+	printf("Usage: %s [options] <image blob> <output file>\n"
 	       "Options:\n"
 
-	       "\t-f, --fit <fit image>       new FIT image file\n"
-	       "\t-r, --raw <raw image>       new raw image file\n"
+	       "\t-f, --fit                   FIT image type\n"
+	       "\t-r, --raw                   raw image type\n"
+	       "\t-g, --guid <guid string>    guid for image blob type\n"
 	       "\t-i, --index <index>         update image index\n"
 	       "\t-I, --instance <instance>   update hardware instance\n"
 #ifdef CONFIG_TOOLS_LIBCRYPTO
@@ -427,14 +429,13 @@  err_1:
 
 int main(int argc, char **argv)
 {
-	char *file;
 	efi_guid_t *guid;
+	unsigned char uuid_buf[16];
 	unsigned long index, instance;
 	uint64_t mcount;
 	char *privkey_file, *cert_file;
 	int c, idx;
 
-	file = NULL;
 	guid = NULL;
 	index = 0;
 	instance = 0;
@@ -449,21 +450,30 @@  int main(int argc, char **argv)
 
 		switch (c) {
 		case 'f':
-			if (file) {
-				printf("Image already specified\n");
+			if (guid) {
+				printf("Image type already specified\n");
 				return -1;
 			}
-			file = optarg;
 			guid = &efi_guid_image_type_uboot_fit;
 			break;
 		case 'r':
-			if (file) {
-				printf("Image already specified\n");
+			if (guid) {
+				printf("Image type already specified\n");
 				return -1;
 			}
-			file = optarg;
 			guid = &efi_guid_image_type_uboot_raw;
 			break;
+		case 'g':
+			if (guid) {
+				printf("Image type already specified\n");
+				return -1;
+			}
+			if (uuid_parse(optarg, uuid_buf)) {
+				printf("Wrong guid format\n");
+				return -1;
+			}
+			guid = (efi_guid_t *)uuid_buf;
+			break;
 		case 'i':
 			index = strtoul(optarg, NULL, 0);
 			break;
@@ -499,14 +509,14 @@  int main(int argc, char **argv)
 	}
 
 	/* check necessary parameters */
-	if ((argc != optind + 1) || !file ||
+	if ((argc != optind + 2) || !guid ||
 	    ((privkey_file && !cert_file) ||
 	     (!privkey_file && cert_file))) {
 		print_usage();
 		exit(EXIT_FAILURE);
 	}
 
-	if (create_fwbin(argv[optind], file, guid, index, instance,
+	if (create_fwbin(argv[argc - 1], argv[argc - 2], guid, index, instance,
 			 mcount, privkey_file, cert_file) < 0) {
 		printf("Creating firmware capsule failed\n");
 		exit(EXIT_FAILURE);