diff mbox series

[V5,16/44] arm: imx8ulp: add clock support

Message ID 20210807080113.16020-17-peng.fan@oss.nxp.com
State New
Headers show
Series imx: add i.MX8ULP support | expand

Commit Message

Peng Fan (OSS) Aug. 7, 2021, 8 a.m. UTC
From: Peng Fan <peng.fan@nxp.com>


Add i.MX8ULP clock support

Signed-off-by: Peng Fan <peng.fan@nxp.com>

---
 arch/arm/include/asm/arch-imx8ulp/cgc.h      | 130 ++++++
 arch/arm/include/asm/arch-imx8ulp/clock.h    |   9 +-
 arch/arm/include/asm/arch-imx8ulp/imx-regs.h |   1 +
 arch/arm/include/asm/arch-imx8ulp/pcc.h      | 139 ++++++
 arch/arm/mach-imx/imx8ulp/Makefile           |   2 +-
 arch/arm/mach-imx/imx8ulp/cgc.c              | 455 +++++++++++++++++++
 arch/arm/mach-imx/imx8ulp/clock.c            | 374 ++++++++++++++-
 arch/arm/mach-imx/imx8ulp/pcc.c              | 449 ++++++++++++++++++
 arch/arm/mach-imx/imx8ulp/soc.c              |   3 +
 9 files changed, 1558 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/include/asm/arch-imx8ulp/cgc.h
 create mode 100644 arch/arm/include/asm/arch-imx8ulp/pcc.h
 create mode 100644 arch/arm/mach-imx/imx8ulp/cgc.c
 create mode 100644 arch/arm/mach-imx/imx8ulp/pcc.c

-- 
2.30.0
diff mbox series

Patch

diff --git a/arch/arm/include/asm/arch-imx8ulp/cgc.h b/arch/arm/include/asm/arch-imx8ulp/cgc.h
new file mode 100644
index 0000000000..34a15fb59c
--- /dev/null
+++ b/arch/arm/include/asm/arch-imx8ulp/cgc.h
@@ -0,0 +1,130 @@ 
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2021 NXP
+ */
+
+#ifndef _ASM_ARCH_CGC_H
+#define _ASM_ARCH_CGC_H
+
+enum cgc1_clk {
+	DUMMY0_CLK,
+	DUMMY1_CLK,
+	LPOSC,
+	XBAR_BUSCLK,
+	SOSC,
+	SOSC_DIV1,
+	SOSC_DIV2,
+	SOSC_DIV3,
+	FRO,
+	FRO_DIV1,
+	FRO_DIV2,
+	FRO_DIV3,
+	PLL2,
+	PLL3,
+	PLL3_VCODIV,
+	PLL3_PFD0,
+	PLL3_PFD1,
+	PLL3_PFD2,
+	PLL3_PFD3,
+	PLL3_PFD0_DIV1,
+	PLL3_PFD0_DIV2,
+	PLL3_PFD1_DIV1,
+	PLL3_PFD1_DIV2,
+	PLL3_PFD2_DIV1,
+	PLL3_PFD2_DIV2,
+	PLL3_PFD3_DIV1,
+	PLL3_PFD3_DIV2,
+};
+
+struct cgc1_regs {
+	u32 verid;
+	u32 rsvd1[4];
+	u32 ca35clk;
+	u32 rsvd2[2];
+	u32 clkoutcfg;
+	u32 rsvd3[4];
+	u32 nicclk;
+	u32 xbarclk;
+	u32 rsvd4[21];
+	u32 clkdivrst;
+	u32 rsvd5[29];
+	u32 soscdiv;
+	u32 rsvd6[63];
+	u32 frodiv;
+	u32 rsvd7[189];
+	u32 pll2csr;
+	u32 rsvd8[3];
+	u32 pll2cfg;
+	u32 rsvd9;
+	u32 pll2denom;
+	u32 pll2num;
+	u32 pll2ss;
+	u32 rsvd10[55];
+	u32 pll3csr;
+	u32 pll3div_vco;
+	u32 pll3div_pfd0;
+	u32 pll3div_pfd1;
+	u32 pll3cfg;
+	u32 pll3pfdcfg;
+	u32 pll3denom;
+	u32 pll3num;
+	u32 pll3ss;
+	u32 pll3lock;
+	u32 rsvd11[54];
+	u32 enetstamp;
+	u32 rsvd12[67];
+	u32 pllusbcfg;
+	u32 rsvd13[59];
+	u32 aud_clk1;
+	u32 sai5_4_clk;
+	u32 tpm6_7clk;
+	u32 mqs1clk;
+	u32 rsvd14[60];
+	u32 lvdscfg;
+};
+
+struct cgc2_regs {
+	u32 verid;
+	u32 rsvd1[4];
+	u32 hificlk;
+	u32 rsvd2[2];
+	u32 clkoutcfg;
+	u32 rsvd3[6];
+	u32 niclpavclk;
+	u32 ddrclk;
+	u32 rsvd4[19];
+	u32 clkdivrst;
+	u32 rsvd5[29];
+	u32 soscdiv;
+	u32 rsvd6[63];
+	u32 frodiv;
+	u32 rsvd7[253];
+	u32 pll4csr;
+	u32 pll4div_vco;
+	u32 pll4div_pfd0;
+	u32 pll4div_pfd1;
+	u32 pll4cfg;
+	u32 pll4pfdcfg;
+	u32 pll4denom;
+	u32 pll4num;
+	u32 pll4ss;
+	u32 pll4lock;
+	u32 rsvd8[128];
+	u32 aud_clk2;
+	u32 sai7_6_clk;
+	u32 tpm8clk;
+	u32 rsvd9[1];
+	u32 spdifclk;
+	u32 rsvd10[59];
+	u32 lvdscfg;
+};
+
+u32 cgc1_clk_get_rate(enum cgc1_clk clk);
+void cgc1_pll3_init(void);
+void cgc1_pll2_init(void);
+void cgc1_soscdiv_init(void);
+void cgc1_init_core_clk(void);
+void cgc2_pll4_init(void);
+void cgc2_ddrclk_config(u32 src, u32 div);
+u32 cgc1_sosc_div(enum cgc1_clk clk);
+#endif
diff --git a/arch/arm/include/asm/arch-imx8ulp/clock.h b/arch/arm/include/asm/arch-imx8ulp/clock.h
index e145c33f01..58e3356e32 100644
--- a/arch/arm/include/asm/arch-imx8ulp/clock.h
+++ b/arch/arm/include/asm/arch-imx8ulp/clock.h
@@ -1,6 +1,6 @@ 
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2020 NXP
+ * Copyright 2021 NXP
  */
 
 #ifndef _ASM_ARCH_IMX8ULP_CLOCK_H
@@ -17,6 +17,7 @@  enum mxc_clock {
 	MXC_DDR_CLK,
 	MXC_ESDHC_CLK,
 	MXC_ESDHC2_CLK,
+	MXC_ESDHC3_CLK,
 	MXC_I2C_CLK,
 };
 
@@ -26,9 +27,15 @@  u32 get_lpuart_clk(void);
 int enable_i2c_clk(unsigned char enable, unsigned int i2c_num);
 u32 imx_get_i2cclk(unsigned int i2c_num);
 #endif
+void enable_usboh3_clk(unsigned char enable);
+int enable_usb_pll(ulong usb_phy_base);
 #ifdef CONFIG_MXC_OCOTP
 void enable_ocotp_clk(unsigned char enable);
 #endif
 void init_clk_usdhc(u32 index);
+void init_clk_fspi(int index);
+void init_clk_ddr(void);
+int set_ddr_clk(u32 phy_freq_mhz);
 void clock_init(void);
+void cgc1_enet_stamp_sel(u32 clk_src);
 #endif
diff --git a/arch/arm/include/asm/arch-imx8ulp/imx-regs.h b/arch/arm/include/asm/arch-imx8ulp/imx-regs.h
index 982f2a9b28..5231155089 100644
--- a/arch/arm/include/asm/arch-imx8ulp/imx-regs.h
+++ b/arch/arm/include/asm/arch-imx8ulp/imx-regs.h
@@ -7,6 +7,7 @@ 
 #define _IMX8ULP_REGS_H_
 #define ARCH_MXC
 
+#include <linux/bitops.h>
 #include <linux/sizes.h>
 
 #define PBRIDGE0_BASE		0x28000000
diff --git a/arch/arm/include/asm/arch-imx8ulp/pcc.h b/arch/arm/include/asm/arch-imx8ulp/pcc.h
new file mode 100644
index 0000000000..091d0175dd
--- /dev/null
+++ b/arch/arm/include/asm/arch-imx8ulp/pcc.h
@@ -0,0 +1,139 @@ 
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2021 NXP
+ */
+
+#ifndef _ASM_ARCH_IMX8ULP_PCC_H
+#define _ASM_ARCH_IMX8ULP_PCC_H
+
+#include <asm/arch/cgc.h>
+
+enum pcc3_entry {
+	DMA1_MP_PCC3_SLOT = 1,
+	DMA1_CH0_PCC3_SLOT = 2,
+	DMA1_CH1_PCC3_SLOT = 3,
+	DMA1_CH2_PCC3_SLOT = 4,
+	DMA1_CH3_PCC3_SLOT = 5,
+	DMA1_CH4_PCC3_SLOT = 6,
+	DMA1_CH5_PCC3_SLOT = 7,
+	DMA1_CH6_PCC3_SLOT = 8,
+	DMA1_CH7_PCC3_SLOT = 9,
+	DMA1_CH8_PCC3_SLOT = 10,
+	DMA1_CH9_PCC3_SLOT = 11,
+	DMA1_CH10_PCC3_SLOT = 12,
+	DMA1_CH11_PCC3_SLOT = 13,
+	DMA1_CH12_PCC3_SLOT = 14,
+	DMA1_CH13_PCC3_SLOT = 15,
+	DMA1_CH14_PCC3_SLOT = 16,
+	DMA1_CH15_PCC3_SLOT = 17,
+	DMA1_CH16_PCC3_SLOT = 18,
+	DMA1_CH17_PCC3_SLOT = 19,
+	DMA1_CH18_PCC3_SLOT = 20,
+	DMA1_CH19_PCC3_SLOT = 21,
+	DMA1_CH20_PCC3_SLOT = 22,
+	DMA1_CH21_PCC3_SLOT = 23,
+	DMA1_CH22_PCC3_SLOT = 24,
+	DMA1_CH23_PCC3_SLOT = 25,
+	DMA1_CH24_PCC3_SLOT = 26,
+	DMA1_CH25_PCC3_SLOT = 27,
+	DMA1_CH26_PCC3_SLOT = 28,
+	DMA1_CH27_PCC3_SLOT = 29,
+	DMA1_CH28_PCC3_SLOT = 30,
+	DMA1_CH29_PCC3_SLOT = 31,
+	DMA1_CH30_PCC3_SLOT = 32,
+	DMA1_CH31_PCC3_SLOT = 33,
+	MU0_B_PCC3_SLOT = 34,
+	MU3_A_PCC3_SLOT = 35,
+	LLWU1_PCC3_SLOT = 38,
+	UPOWER_PCC3_SLOT = 40,
+	WDOG3_PCC3_SLOT = 42,
+	WDOG4_PCC3_SLOT = 43,
+	XRDC_MGR_PCC3_SLOT = 47,
+	SEMA42_1_PCC3_SLOT = 48,
+	ROMCP1_PCC3_SLOT = 49,
+	LPIT1_PCC3_SLOT = 50,
+	TPM4_PCC3_SLOT = 51,
+	TPM5_PCC3_SLOT = 52,
+	FLEXIO1_PCC3_SLOT = 53,
+	I3C2_PCC3_SLOT = 54,
+	LPI2C4_PCC3_SLOT = 55,
+	LPI2C5_PCC3_SLOT = 56,
+	LPUART4_PCC3_SLOT = 57,
+	LPUART5_PCC3_SLOT = 58,
+	LPSPI4_PCC3_SLOT = 59,
+	LPSPI5_PCC3_SLOT = 60,
+};
+
+enum pcc4_entry {
+	FLEXSPI2_PCC4_SLOT = 1,
+	TPM6_PCC4_SLOT = 2,
+	TPM7_PCC4_SLOT = 3,
+	LPI2C6_PCC4_SLOT = 4,
+	LPI2C7_PCC4_SLOT = 5,
+	LPUART6_PCC4_SLOT = 6,
+	LPUART7_PCC4_SLOT = 7,
+	SAI4_PCC4_SLOT = 8,
+	SAI5_PCC4_SLOT = 9,
+	PCTLE_PCC4_SLOT = 10,
+	PCTLF_PCC4_SLOT = 11,
+	SDHC0_PCC4_SLOT = 13,
+	SDHC1_PCC4_SLOT = 14,
+	SDHC2_PCC4_SLOT = 15,
+	USB0_PCC4_SLOT = 16,
+	USBPHY_PCC4_SLOT = 17,
+	USB1_PCC4_SLOT = 18,
+	USB1PHY_PCC4_SLOT = 19,
+	USB_XBAR_PCC4_SLOT = 20,
+	ENET_PCC4_SLOT = 21,
+	SFA1_PCC4_SLOT = 22,
+	RGPIOE_PCC4_SLOT = 30,
+	RGPIOF_PCC4_SLOT = 31,
+};
+
+/* PCC registers */
+#define PCC_PR_OFFSET	31
+#define PCC_PR_MASK		(0x1 << PCC_PR_OFFSET)
+#define PCC_CGC_OFFSET	30
+#define PCC_CGC_MASK	(0x1 << PCC_CGC_OFFSET)
+#define PCC_INUSE_OFFSET	29
+#define PCC_INUSE_MASK		(0x1 << PCC_INUSE_OFFSET)
+#define PCC_PCS_OFFSET	24
+#define PCC_PCS_MASK	(0x7 << PCC_PCS_OFFSET)
+#define PCC_FRAC_OFFSET	3
+#define PCC_FRAC_MASK	(0x1 << PCC_FRAC_OFFSET)
+#define PCC_PCD_OFFSET	0
+#define PCC_PCD_MASK	(0x7 << PCC_PCD_OFFSET)
+
+enum pcc_clksrc_type {
+	CLKSRC_PER_PLAT = 0,
+	CLKSRC_PER_BUS = 1,
+	CLKSRC_NO_PCS = 2,
+};
+
+enum pcc_div_type {
+	PCC_HAS_DIV,
+	PCC_NO_DIV,
+};
+
+enum pcc_rst_b {
+	PCC_HAS_RST_B,
+	PCC_NO_RST_B,
+};
+
+/* This structure keeps info for each pcc slot */
+struct pcc_entry {
+	u32 pcc_base;
+	u32 pcc_slot;
+	enum pcc_clksrc_type clksrc;
+	enum pcc_div_type div;
+	enum pcc_rst_b rst_b;
+};
+
+int pcc_clock_enable(int pcc_controller, int pcc_clk_slot, bool enable);
+int pcc_clock_sel(int pcc_controller, int pcc_clk_slot, enum cgc1_clk src);
+int pcc_clock_div_config(int pcc_controller, int pcc_clk_slot, bool frac, u8 div);
+bool pcc_clock_is_enable(int pcc_controller, int pcc_clk_slot);
+int pcc_clock_get_clksrc(int pcc_controller, int pcc_clk_slot, enum cgc1_clk *src);
+int pcc_reset_peripheral(int pcc_controller, int pcc_clk_slot, bool reset);
+u32 pcc_clock_get_rate(int pcc_controller, int pcc_clk_slot);
+#endif
diff --git a/arch/arm/mach-imx/imx8ulp/Makefile b/arch/arm/mach-imx/imx8ulp/Makefile
index e8970dc04f..78c81d78bb 100644
--- a/arch/arm/mach-imx/imx8ulp/Makefile
+++ b/arch/arm/mach-imx/imx8ulp/Makefile
@@ -4,4 +4,4 @@ 
 #
 
 obj-y += lowlevel_init.o
-obj-y += soc.o clock.o iomux.o
+obj-y += soc.o clock.o iomux.o pcc.o cgc.o
diff --git a/arch/arm/mach-imx/imx8ulp/cgc.c b/arch/arm/mach-imx/imx8ulp/cgc.c
new file mode 100644
index 0000000000..7bfc3862cd
--- /dev/null
+++ b/arch/arm/mach-imx/imx8ulp/cgc.c
@@ -0,0 +1,455 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 NXP
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <asm/io.h>
+#include <errno.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/cgc.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/global_data.h>
+#include <linux/delay.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct cgc1_regs *cgc1_regs = (struct cgc1_regs *)0x292C0000UL;
+static struct cgc2_regs *cgc2_regs = (struct cgc2_regs *)0x2da60000UL;
+
+void cgc1_soscdiv_init(void)
+{
+	/* Configure SOSC/FRO DIV1 ~ DIV3 */
+	clrbits_le32(&cgc1_regs->soscdiv, BIT(7));
+	clrbits_le32(&cgc1_regs->soscdiv, BIT(15));
+	clrbits_le32(&cgc1_regs->soscdiv, BIT(23));
+	clrbits_le32(&cgc1_regs->soscdiv, BIT(31));
+
+	clrbits_le32(&cgc1_regs->frodiv, BIT(7));
+}
+
+void cgc1_pll2_init(void)
+{
+	u32 reg;
+
+	if (readl(&cgc1_regs->pll2csr) & BIT(23))
+		clrbits_le32(&cgc1_regs->pll2csr, BIT(23));
+
+	/* Disable PLL2 */
+	clrbits_le32(&cgc1_regs->pll2csr, BIT(0));
+	mdelay(1);
+
+	/* wait valid bit false */
+	while ((readl(&cgc1_regs->pll2csr) & BIT(24)))
+		;
+
+	/* Select SOSC as source, freq = 31 * 24 =744mhz */
+	reg = 31 << 16;
+	writel(reg, &cgc1_regs->pll2cfg);
+
+	/* Enable PLL2 */
+	setbits_le32(&cgc1_regs->pll2csr, BIT(0));
+
+	/* Wait for PLL2 clock ready */
+	while (!(readl(&cgc1_regs->pll2csr) & BIT(24)))
+		;
+}
+
+static void cgc1_set_a35_clk(u32 clk_src, u32 div_core)
+{
+	u32 reg;
+
+	/* ulock */
+	if (readl(&cgc1_regs->ca35clk) & BIT(31))
+		clrbits_le32(&cgc1_regs->ca35clk, BIT(31));
+
+	reg = readl(&cgc1_regs->ca35clk);
+	reg &= ~GENMASK(29, 21);
+	reg |= ((clk_src & 0x3) << 28);
+	reg |= (((div_core - 1) & 0x3f) << 21);
+	writel(reg, &cgc1_regs->ca35clk);
+
+	while (!(readl(&cgc1_regs->ca35clk) & BIT(27)))
+		;
+}
+
+void cgc1_init_core_clk(void)
+{
+	u32 reg = readl(&cgc1_regs->ca35clk);
+
+	/* if already selected to PLL2, switch to FRO firstly */
+	if (((reg >> 28) & 0x3) == 0x1)
+		cgc1_set_a35_clk(0, 1);
+
+	/* Set pll2 to 750Mhz for 1V  */
+	cgc1_pll2_init();
+
+	/* Set A35 clock to pll2 */
+	cgc1_set_a35_clk(1, 1);
+}
+
+void cgc1_enet_stamp_sel(u32 clk_src)
+{
+	writel((clk_src & 0x7) << 24, &cgc1_regs->enetstamp);
+}
+
+void cgc1_pll3_init(void)
+{
+	/* Gate off VCO */
+	setbits_le32(&cgc1_regs->pll3div_vco, BIT(7));
+
+	/* Disable PLL3 */
+	clrbits_le32(&cgc1_regs->pll3csr, BIT(0));
+
+	/* Gate off PFDxDIV */
+	setbits_le32(&cgc1_regs->pll3div_pfd0, BIT(7) | BIT(15) | BIT(23) | BIT(31));
+	setbits_le32(&cgc1_regs->pll3div_pfd1, BIT(7) | BIT(15) | BIT(23) | BIT(31));
+
+	/* Gate off PFDx */
+	setbits_le32(&cgc1_regs->pll3pfdcfg, BIT(7));
+	setbits_le32(&cgc1_regs->pll3pfdcfg, BIT(15));
+	setbits_le32(&cgc1_regs->pll3pfdcfg, BIT(23));
+	setbits_le32(&cgc1_regs->pll3pfdcfg, BIT(31));
+
+	/* Select SOSC as source */
+	clrbits_le32(&cgc1_regs->pll3cfg, BIT(0));
+
+	//setbits_le32(&cgc1_regs->pll3cfg, 22 << 16);
+	writel(22 << 16, &cgc1_regs->pll3cfg);
+
+	writel(578, &cgc1_regs->pll3num);
+	writel(1000, &cgc1_regs->pll3denom);
+
+	/* Enable PLL3 */
+	setbits_le32(&cgc1_regs->pll3csr, BIT(0));
+
+	/* Wait for PLL3 clock ready */
+	while (!(readl(&cgc1_regs->pll3csr) & BIT(24)))
+		;
+	/* Gate on VCO */
+	clrbits_le32(&cgc1_regs->pll3div_vco, BIT(7));
+
+	/*
+	 * PFD0: 380MHz/396/396/328
+	 */
+	clrbits_le32(&cgc1_regs->pll3pfdcfg, 0x3F);
+	setbits_le32(&cgc1_regs->pll3pfdcfg, 25 << 0);
+	clrbits_le32(&cgc1_regs->pll3pfdcfg, BIT(7));
+	while (!(readl(&cgc1_regs->pll3pfdcfg) & BIT(6)))
+		;
+
+	clrbits_le32(&cgc1_regs->pll3pfdcfg, 0x3F << 8);
+	setbits_le32(&cgc1_regs->pll3pfdcfg, 24 << 8);
+	clrbits_le32(&cgc1_regs->pll3pfdcfg, BIT(15));
+	while (!(readl(&cgc1_regs->pll3pfdcfg) & BIT(14)))
+		;
+
+	clrbits_le32(&cgc1_regs->pll3pfdcfg, 0x3F << 16);
+	setbits_le32(&cgc1_regs->pll3pfdcfg, 24 << 16);
+	clrbits_le32(&cgc1_regs->pll3pfdcfg, BIT(23));
+	while (!(readl(&cgc1_regs->pll3pfdcfg) & BIT(22)))
+		;
+
+	clrbits_le32(&cgc1_regs->pll3pfdcfg, 0x3F << 24);
+	setbits_le32(&cgc1_regs->pll3pfdcfg, 29 << 24);
+	clrbits_le32(&cgc1_regs->pll3pfdcfg, BIT(31));
+	while (!(readl(&cgc1_regs->pll3pfdcfg) & BIT(30)))
+		;
+
+	clrbits_le32(&cgc1_regs->pll3div_pfd0, BIT(7));
+	clrbits_le32(&cgc1_regs->pll3div_pfd0, BIT(15));
+	clrbits_le32(&cgc1_regs->pll3div_pfd0, BIT(23));
+	clrbits_le32(&cgc1_regs->pll3div_pfd0, BIT(31));
+
+	clrbits_le32(&cgc1_regs->pll3div_pfd1, BIT(7));
+	clrbits_le32(&cgc1_regs->pll3div_pfd1, BIT(15));
+	clrbits_le32(&cgc1_regs->pll3div_pfd1, BIT(23));
+	clrbits_le32(&cgc1_regs->pll3div_pfd1, BIT(31));
+}
+
+void cgc2_pll4_init(void)
+{
+	/* Disable PFD DIV and clear DIV */
+	writel(0x80808080, &cgc2_regs->pll4div_pfd0);
+	writel(0x80808080, &cgc2_regs->pll4div_pfd1);
+
+	/* Gate off and clear PFD  */
+	writel(0x80808080, &cgc2_regs->pll4pfdcfg);
+
+	/* Disable PLL4 */
+	writel(0x0, &cgc2_regs->pll4csr);
+
+	/* Configure PLL4 to 528Mhz and clock source from SOSC */
+	writel(22 << 16, &cgc2_regs->pll4cfg);
+	writel(0x1, &cgc2_regs->pll4csr);
+
+	/* wait for PLL4 output valid */
+	while (!(readl(&cgc2_regs->pll4csr) & BIT(24)))
+		;
+
+	/* Enable all 4 PFDs */
+	setbits_le32(&cgc2_regs->pll4pfdcfg, 30 << 0); /* 316.8Mhz for NIC_LPAV */
+	setbits_le32(&cgc2_regs->pll4pfdcfg, 18 << 8);
+	setbits_le32(&cgc2_regs->pll4pfdcfg, 12 << 16);
+	setbits_le32(&cgc2_regs->pll4pfdcfg, 24 << 24);
+
+	clrbits_le32(&cgc2_regs->pll4pfdcfg, BIT(7) | BIT(15) | BIT(23) | BIT(31));
+
+	while ((readl(&cgc2_regs->pll4pfdcfg) & (BIT(30) | BIT(22) | BIT(14) | BIT(6)))
+		!= (BIT(30) | BIT(22) | BIT(14) | BIT(6)))
+		;
+
+	/* Enable PFD DIV */
+	clrbits_le32(&cgc2_regs->pll4div_pfd0, BIT(7) | BIT(15) | BIT(23) | BIT(31));
+	clrbits_le32(&cgc2_regs->pll4div_pfd1, BIT(7) | BIT(15) | BIT(23) | BIT(31));
+}
+
+void cgc2_ddrclk_config(u32 src, u32 div)
+{
+	writel((src << 28) | (div << 21), &cgc2_regs->ddrclk);
+	/* wait for DDRCLK switching done */
+	while (!(readl(&cgc2_regs->ddrclk) & BIT(27)))
+		;
+}
+
+u32 decode_pll(enum cgc1_clk pll)
+{
+	u32 reg, infreq, mult;
+	u32 num, denom;
+
+	infreq = 24000000U;
+	/*
+	 * Alought there are four choices for the bypass src,
+	 * we choose SOSC 24M which is the default set in ROM.
+	 * TODO: check more the comments
+	 */
+	switch (pll) {
+	case PLL2:
+		reg = readl(&cgc1_regs->pll2csr);
+		if (!(reg & BIT(24)))
+			return 0;
+
+		reg = readl(&cgc1_regs->pll2cfg);
+		mult = (reg >> 16) & 0x7F;
+		denom = readl(&cgc1_regs->pll2denom) & 0x3FFFFFFF;
+		num = readl(&cgc1_regs->pll2num) & 0x3FFFFFFF;
+
+		return (u64)infreq * mult + (u64)infreq * num / denom;
+	case PLL3:
+		reg = readl(&cgc1_regs->pll3csr);
+		if (!(reg & BIT(24)))
+			return 0;
+
+		reg = readl(&cgc1_regs->pll3cfg);
+		mult = (reg >> 16) & 0x7F;
+		denom = readl(&cgc1_regs->pll3denom) & 0x3FFFFFFF;
+		num = readl(&cgc1_regs->pll3num) & 0x3FFFFFFF;
+
+		return (u64)infreq * mult + (u64)infreq * num / denom;
+	default:
+		printf("Unsupported pll clocks %d\n", pll);
+		break;
+	}
+
+	return 0;
+}
+
+u32 cgc1_pll3_vcodiv_rate(void)
+{
+	u32 reg, gate, div;
+
+	reg = readl(&cgc1_regs->pll3div_vco);
+	gate = BIT(7) & reg;
+	div = reg & 0x3F;
+
+	return gate ? 0 : decode_pll(PLL3) / (div + 1);
+}
+
+u32 cgc1_pll3_pfd_rate(enum cgc1_clk clk)
+{
+	u32 index, gate, vld, reg;
+
+	switch (clk) {
+	case PLL3_PFD0:
+		index = 0;
+		break;
+	case PLL3_PFD1:
+		index = 1;
+		break;
+	case PLL3_PFD2:
+		index = 2;
+		break;
+	case PLL3_PFD3:
+		index = 3;
+		break;
+	default:
+		return 0;
+	}
+
+	reg = readl(&cgc1_regs->pll3pfdcfg);
+	gate = reg & (BIT(7) << (index * 8));
+	vld = reg & (BIT(6) << (index * 8));
+
+	if (gate || !vld)
+		return 0;
+
+	return (u64)decode_pll(PLL3) * 18 / ((reg >> (index * 8)) & 0x3F);
+}
+
+u32 cgc1_pll3_pfd_div(enum cgc1_clk clk)
+{
+	void __iomem *base;
+	u32 pfd, index, gate, reg;
+
+	switch (clk) {
+	case PLL3_PFD0_DIV1:
+		base = &cgc1_regs->pll3div_pfd0;
+		pfd = PLL3_PFD0;
+		index = 0;
+		break;
+	case PLL3_PFD0_DIV2:
+		base = &cgc1_regs->pll3div_pfd0;
+		pfd = PLL3_PFD0;
+		index = 1;
+		break;
+	case PLL3_PFD1_DIV1:
+		base = &cgc1_regs->pll3div_pfd0;
+		pfd = PLL3_PFD1;
+		index = 2;
+		break;
+	case PLL3_PFD1_DIV2:
+		base = &cgc1_regs->pll3div_pfd0;
+		pfd = PLL3_PFD1;
+		index = 3;
+		break;
+	case PLL3_PFD2_DIV1:
+		base = &cgc1_regs->pll3div_pfd1;
+		pfd = PLL3_PFD2;
+		index = 0;
+		break;
+	case PLL3_PFD2_DIV2:
+		base = &cgc1_regs->pll3div_pfd1;
+		pfd = PLL3_PFD2;
+		index = 1;
+		break;
+	case PLL3_PFD3_DIV1:
+		base = &cgc1_regs->pll3div_pfd1;
+		pfd = PLL3_PFD3;
+		index = 2;
+		break;
+	case PLL3_PFD3_DIV2:
+		base = &cgc1_regs->pll3div_pfd1;
+		pfd = PLL3_PFD3;
+		index = 3;
+		break;
+	default:
+		return 0;
+	}
+
+	reg = readl(base);
+	gate = reg & (BIT(7) << (index * 8));
+
+	if (gate)
+		return 0;
+
+	return cgc1_pll3_pfd_rate(pfd) / (((reg >> (index * 8)) & 0x3F) + 1);
+}
+
+u32 cgc1_sosc_div(enum cgc1_clk clk)
+{
+	u32 reg, gate, index;
+
+	switch (clk) {
+	case SOSC:
+		return 24000000;
+	case SOSC_DIV1:
+		index = 0;
+		break;
+	case SOSC_DIV2:
+		index = 1;
+		break;
+	case SOSC_DIV3:
+		index = 2;
+		break;
+	default:
+		return 0;
+	}
+
+	reg = readl(&cgc1_regs->soscdiv);
+	gate = reg & (BIT(7) << (index * 8));
+
+	if (gate)
+		return 0;
+
+	return 24000000 / (((reg >> (index * 8)) & 0x3F) + 1);
+}
+
+u32 cgc1_fro_div(enum cgc1_clk clk)
+{
+	u32 reg, gate, vld, index;
+
+	switch (clk) {
+	case FRO:
+		return 192000000;
+	case FRO_DIV1:
+		index = 0;
+		break;
+	case FRO_DIV2:
+		index = 1;
+		break;
+	case FRO_DIV3:
+		index = 2;
+		break;
+	default:
+		return 0;
+	}
+
+	reg = readl(&cgc1_regs->frodiv);
+	gate = reg & (BIT(7) << (index * 8));
+	vld = reg & (BIT(6) << (index * 8));
+
+	if (gate || !vld)
+		return 0;
+
+	return 24000000 / (((reg >> (index * 8)) & 0x3F) + 1);
+}
+
+u32 cgc1_clk_get_rate(enum cgc1_clk clk)
+{
+	switch (clk) {
+	case SOSC:
+	case SOSC_DIV1:
+	case SOSC_DIV2:
+	case SOSC_DIV3:
+		return cgc1_sosc_div(clk);
+	case FRO:
+	case FRO_DIV1:
+	case FRO_DIV2:
+	case FRO_DIV3:
+		return cgc1_fro_div(clk);
+	case PLL2:
+		return decode_pll(PLL2);
+	case PLL3:
+		return decode_pll(PLL3);
+	case PLL3_VCODIV:
+		return cgc1_pll3_vcodiv_rate();
+	case PLL3_PFD0:
+	case PLL3_PFD1:
+	case PLL3_PFD2:
+	case PLL3_PFD3:
+		return cgc1_pll3_pfd_rate(clk);
+	case PLL3_PFD0_DIV1:
+	case PLL3_PFD0_DIV2:
+	case PLL3_PFD1_DIV1:
+	case PLL3_PFD1_DIV2:
+	case PLL3_PFD2_DIV1:
+	case PLL3_PFD2_DIV2:
+	case PLL3_PFD3_DIV1:
+	case PLL3_PFD3_DIV2:
+		return cgc1_pll3_pfd_div(clk);
+	default:
+		printf("Unsupported cgc1 clock: %d\n", clk);
+		return 0;
+	}
+}
diff --git a/arch/arm/mach-imx/imx8ulp/clock.c b/arch/arm/mach-imx/imx8ulp/clock.c
index f866809fc2..ebbaad4106 100644
--- a/arch/arm/mach-imx/imx8ulp/clock.c
+++ b/arch/arm/mach-imx/imx8ulp/clock.c
@@ -4,24 +4,394 @@ 
  */
 
 #include <common.h>
+#include <command.h>
 #include <div64.h>
+#include <asm/arch/imx-regs.h>
 #include <asm/io.h>
 #include <errno.h>
 #include <asm/arch/clock.h>
+#include <asm/arch/pcc.h>
+#include <asm/arch/cgc.h>
 #include <asm/arch/sys_proto.h>
+#include <asm/global_data.h>
+#include <linux/delay.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#define PLL_USB_EN_USB_CLKS_MASK	(0x01 << 6)
+#define PLL_USB_PWR_MASK		(0x01 << 12)
+#define PLL_USB_ENABLE_MASK		(0x01 << 13)
+#define PLL_USB_BYPASS_MASK		(0x01 << 16)
+#define PLL_USB_REG_ENABLE_MASK		(0x01 << 21)
+#define PLL_USB_DIV_SEL_MASK		(0x07 << 22)
+#define PLL_USB_LOCK_MASK		(0x01 << 31)
+#define PCC5_LPDDR4_ADDR 0x2da70108
+
+static void lpuart_set_clk(u32 index, enum cgc1_clk clk)
+{
+	const u32 lpuart_pcc_slots[] = {
+		LPUART4_PCC3_SLOT,
+		LPUART5_PCC3_SLOT,
+		LPUART6_PCC4_SLOT,
+		LPUART7_PCC4_SLOT,
+	};
+
+	const u32 lpuart_pcc[] = {
+		3, 3, 4, 4,
+	};
+
+	if (index > 3)
+		return;
+
+	pcc_clock_enable(lpuart_pcc[index], lpuart_pcc_slots[index], false);
+	pcc_clock_sel(lpuart_pcc[index], lpuart_pcc_slots[index], clk);
+	pcc_clock_enable(lpuart_pcc[index], lpuart_pcc_slots[index], true);
+
+	pcc_reset_peripheral(lpuart_pcc[index], lpuart_pcc_slots[index], false);
+}
+
+static void init_clk_lpuart(void)
+{
+	u32 index = 0, i;
+
+	const u32 lpuart_array[] = {
+		LPUART4_RBASE,
+		LPUART5_RBASE,
+		LPUART6_RBASE,
+		LPUART7_RBASE,
+	};
+
+	for (i = 0; i < 4; i++) {
+		if (lpuart_array[i] == LPUART_BASE) {
+			index = i;
+			break;
+		}
+	}
+
+	lpuart_set_clk(index, SOSC_DIV2);
+}
+
+void init_clk_fspi(int index)
+{
+	pcc_clock_enable(4, FLEXSPI2_PCC4_SLOT, false);
+	pcc_clock_sel(4, FLEXSPI2_PCC4_SLOT, PLL3_PFD2_DIV1);
+	pcc_clock_div_config(4, FLEXSPI2_PCC4_SLOT, false, 8);
+	pcc_clock_enable(4, FLEXSPI2_PCC4_SLOT, true);
+	pcc_reset_peripheral(4, FLEXSPI2_PCC4_SLOT, false);
+}
+
+void setclkout_ddr(void)
+{
+	writel(0x12800000, 0x2DA60020);
+	writel(0xa00, 0x298C0000); /* PTD0 */
+}
+
+void ddrphy_pll_lock(void)
+{
+	writel(0x00011542, 0x2E065964);
+	writel(0x00011542, 0x2E06586C);
+
+	writel(0x00000B01, 0x2E062000);
+	writel(0x00000B01, 0x2E060000);
+}
+
+void init_clk_ddr(void)
+{
+	/* enable pll4 and ddrclk*/
+	cgc2_pll4_init();
+	cgc2_ddrclk_config(1, 1);
+
+	/* enable ddr pcc */
+	writel(0xd0000000, PCC5_LPDDR4_ADDR);
+
+	/* for debug */
+	/* setclkout_ddr(); */
+}
+
+int set_ddr_clk(u32 phy_freq_mhz)
+{
+	debug("%s %u\n", __func__, phy_freq_mhz);
+
+	if (phy_freq_mhz == 48) {
+		writel(0x90000000, PCC5_LPDDR4_ADDR); /* disable ddr pcc */
+		cgc2_ddrclk_config(2, 0); /* 24Mhz DDR clock */
+		writel(0xd0000000, PCC5_LPDDR4_ADDR); /* enable ddr pcc */
+	} else if (phy_freq_mhz == 384) {
+		writel(0x90000000, PCC5_LPDDR4_ADDR); /* disable ddr pcc */
+		cgc2_ddrclk_config(0, 0); /* 192Mhz DDR clock */
+		writel(0xd0000000, PCC5_LPDDR4_ADDR); /* enable ddr pcc */
+	} else if (phy_freq_mhz == 528) {
+		writel(0x90000000, PCC5_LPDDR4_ADDR); /* disable ddr pcc */
+		cgc2_ddrclk_config(4, 1); /* 264Mhz DDR clock */
+		writel(0xd0000000, PCC5_LPDDR4_ADDR); /* enable ddr pcc */
+	} else if (phy_freq_mhz == 264) {
+		writel(0x90000000, PCC5_LPDDR4_ADDR); /* disable ddr pcc */
+		cgc2_ddrclk_config(4, 3); /* 132Mhz DDR clock */
+		writel(0xd0000000, PCC5_LPDDR4_ADDR); /* enable ddr pcc */
+	} else if (phy_freq_mhz == 192) {
+		writel(0x90000000, PCC5_LPDDR4_ADDR); /* disable ddr pcc */
+		cgc2_ddrclk_config(0, 1); /* 96Mhz DDR clock */
+		writel(0xd0000000, PCC5_LPDDR4_ADDR); /* enable ddr pcc */
+	} else if (phy_freq_mhz == 96) {
+		writel(0x90000000, PCC5_LPDDR4_ADDR); /* disable ddr pcc */
+		cgc2_ddrclk_config(0, 3); /* 48Mhz DDR clock */
+		writel(0xd0000000, PCC5_LPDDR4_ADDR); /* enable ddr pcc */
+	} else {
+		printf("ddr phy clk %uMhz is not supported\n", phy_freq_mhz);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 void clock_init(void)
 {
+	cgc1_soscdiv_init();
+	cgc1_init_core_clk();
+
+	init_clk_lpuart();
+
+	pcc_clock_enable(4, SDHC0_PCC4_SLOT, false);
+	pcc_clock_sel(4, SDHC0_PCC4_SLOT, PLL3_PFD1_DIV2);
+	pcc_clock_enable(4, SDHC0_PCC4_SLOT, true);
+	pcc_reset_peripheral(4, SDHC0_PCC4_SLOT, false);
+
+	pcc_clock_enable(4, SDHC1_PCC4_SLOT, false);
+	pcc_clock_sel(4, SDHC1_PCC4_SLOT, PLL3_PFD2_DIV1);
+	pcc_clock_enable(4, SDHC1_PCC4_SLOT, true);
+	pcc_reset_peripheral(4, SDHC1_PCC4_SLOT, false);
+
+	pcc_clock_enable(4, SDHC2_PCC4_SLOT, false);
+	pcc_clock_sel(4, SDHC2_PCC4_SLOT, PLL3_PFD2_DIV1);
+	pcc_clock_enable(4, SDHC2_PCC4_SLOT, true);
+	pcc_reset_peripheral(4, SDHC2_PCC4_SLOT, false);
+
+	/* Enable upower mu1 clk */
+	pcc_clock_enable(3, UPOWER_PCC3_SLOT, true);
+
+	/*
+	 * Enable clock division
+	 * TODO: may not needed after ROM ready.
+	 */
+}
+
+#if IS_ENABLED(CONFIG_SYS_I2C_IMX_LPI2C)
+int enable_i2c_clk(unsigned char enable, u32 i2c_num)
+{
+	/* Set parent to FIRC DIV2 clock */
+	const u32 lpi2c_pcc_clks[] = {
+		LPI2C4_PCC3_SLOT << 8 | 3,
+		LPI2C5_PCC3_SLOT << 8 | 3,
+		LPI2C6_PCC4_SLOT << 8 | 4,
+		LPI2C7_PCC4_SLOT << 8 | 4,
+	};
+
+	if (i2c_num < 4 || i2c_num > 7)
+		return -EINVAL;
+
+	if (enable) {
+		pcc_clock_enable(lpi2c_pcc_clks[i2c_num - 4] & 0xff,
+				 lpi2c_pcc_clks[i2c_num - 4] >> 8, false);
+		pcc_clock_sel(lpi2c_pcc_clks[i2c_num - 4] & 0xff,
+			      lpi2c_pcc_clks[i2c_num - 4] >> 8, SOSC_DIV2);
+		pcc_clock_enable(lpi2c_pcc_clks[i2c_num - 4] & 0xff,
+				 lpi2c_pcc_clks[i2c_num - 4] >> 8, true);
+		pcc_reset_peripheral(lpi2c_pcc_clks[i2c_num - 4] & 0xff,
+				     lpi2c_pcc_clks[i2c_num - 4] >> 8, false);
+	} else {
+		pcc_clock_enable(lpi2c_pcc_clks[i2c_num - 4] & 0xff,
+				 lpi2c_pcc_clks[i2c_num - 4] >> 8, false);
+	}
+	return 0;
+}
+
+u32 imx_get_i2cclk(u32 i2c_num)
+{
+	const u32 lpi2c_pcc_clks[] = {
+		LPI2C4_PCC3_SLOT << 8 | 3,
+		LPI2C5_PCC3_SLOT << 8 | 3,
+		LPI2C6_PCC4_SLOT << 8 | 4,
+		LPI2C7_PCC4_SLOT << 8 | 4,
+	};
+
+	if (i2c_num < 4 || i2c_num > 7)
+		return 0;
+
+	return pcc_clock_get_rate(lpi2c_pcc_clks[i2c_num - 4] & 0xff,
+				  lpi2c_pcc_clks[i2c_num - 4] >> 8);
+}
+#endif
+
+void enable_usboh3_clk(unsigned char enable)
+{
+	if (enable) {
+		pcc_clock_enable(4, USB0_PCC4_SLOT, true);
+		pcc_clock_enable(4, USBPHY_PCC4_SLOT, true);
+		pcc_reset_peripheral(4, USB0_PCC4_SLOT, false);
+		pcc_reset_peripheral(4, USBPHY_PCC4_SLOT, false);
+
+#ifdef CONFIG_USB_MAX_CONTROLLER_COUNT
+		if (CONFIG_USB_MAX_CONTROLLER_COUNT > 1) {
+			pcc_clock_enable(4, USB1_PCC4_SLOT, true);
+			pcc_clock_enable(4, USB1PHY_PCC4_SLOT, true);
+			pcc_reset_peripheral(4, USB1_PCC4_SLOT, false);
+			pcc_reset_peripheral(4, USB1PHY_PCC4_SLOT, false);
+		}
+#endif
+
+		pcc_clock_enable(4, USB_XBAR_PCC4_SLOT, true);
+	} else {
+		pcc_clock_enable(4, USB0_PCC4_SLOT, false);
+		pcc_clock_enable(4, USB1_PCC4_SLOT, false);
+		pcc_clock_enable(4, USBPHY_PCC4_SLOT, false);
+		pcc_clock_enable(4, USB1PHY_PCC4_SLOT, false);
+		pcc_clock_enable(4, USB_XBAR_PCC4_SLOT, false);
+	}
 }
 
-unsigned int mxc_get_clock(enum mxc_clock clk)
+int enable_usb_pll(ulong usb_phy_base)
 {
+	u32 sosc_rate;
+	s32 timeout = 1000000;
+
+	struct usbphy_regs *usbphy =
+		(struct usbphy_regs *)usb_phy_base;
+
+	sosc_rate = cgc1_sosc_div(SOSC);
+	if (!sosc_rate)
+		return -EPERM;
+
+	if (!(readl(&usbphy->usb1_pll_480_ctrl) & PLL_USB_LOCK_MASK)) {
+		writel(0x1c00000, &usbphy->usb1_pll_480_ctrl_clr);
+
+		switch (sosc_rate) {
+		case 24000000:
+			writel(0xc00000, &usbphy->usb1_pll_480_ctrl_set);
+			break;
+
+		case 30000000:
+			writel(0x800000, &usbphy->usb1_pll_480_ctrl_set);
+			break;
+
+		case 19200000:
+			writel(0x1400000, &usbphy->usb1_pll_480_ctrl_set);
+			break;
+
+		default:
+			writel(0xc00000, &usbphy->usb1_pll_480_ctrl_set);
+			break;
+		}
+
+		/* Enable the regulator first */
+		writel(PLL_USB_REG_ENABLE_MASK,
+		       &usbphy->usb1_pll_480_ctrl_set);
+
+		/* Wait at least 15us */
+		udelay(15);
+
+		/* Enable the power */
+		writel(PLL_USB_PWR_MASK, &usbphy->usb1_pll_480_ctrl_set);
+
+		/* Wait lock */
+		while (timeout--) {
+			if (readl(&usbphy->usb1_pll_480_ctrl) &
+			    PLL_USB_LOCK_MASK)
+				break;
+		}
+
+		if (timeout <= 0) {
+			/* If timeout, we power down the pll */
+			writel(PLL_USB_PWR_MASK,
+			       &usbphy->usb1_pll_480_ctrl_clr);
+			return -ETIME;
+		}
+	}
+
+	/* Clear the bypass */
+	writel(PLL_USB_BYPASS_MASK, &usbphy->usb1_pll_480_ctrl_clr);
+
+	/* Enable the PLL clock out to USB */
+	writel((PLL_USB_EN_USB_CLKS_MASK | PLL_USB_ENABLE_MASK),
+	       &usbphy->usb1_pll_480_ctrl_set);
+
 	return 0;
 }
 
+u32 mxc_get_clock(enum mxc_clock clk)
+{
+	switch (clk) {
+	case MXC_ESDHC_CLK:
+		return pcc_clock_get_rate(4, SDHC0_PCC4_SLOT);
+	case MXC_ESDHC2_CLK:
+		return pcc_clock_get_rate(4, SDHC1_PCC4_SLOT);
+	case MXC_ESDHC3_CLK:
+		return pcc_clock_get_rate(4, SDHC2_PCC4_SLOT);
+	case MXC_ARM_CLK:
+		return cgc1_clk_get_rate(PLL2);
+	default:
+		return 0;
+	}
+}
+
 u32 get_lpuart_clk(void)
 {
-	return 24000000;
+	int index = 0;
+
+	const u32 lpuart_array[] = {
+		LPUART4_RBASE,
+		LPUART5_RBASE,
+		LPUART6_RBASE,
+		LPUART7_RBASE,
+	};
+
+	const u32 lpuart_pcc_slots[] = {
+		LPUART4_PCC3_SLOT,
+		LPUART5_PCC3_SLOT,
+		LPUART6_PCC4_SLOT,
+		LPUART7_PCC4_SLOT,
+	};
+
+	const u32 lpuart_pcc[] = {
+		3, 3, 4, 4,
+	};
+
+	for (index = 0; index < 4; index++) {
+		if (lpuart_array[index] == LPUART_BASE)
+			break;
+	}
+
+	if (index > 3)
+		return 0;
+
+	return pcc_clock_get_rate(lpuart_pcc[index], lpuart_pcc_slots[index]);
+}
+
+#ifndef CONFIG_SPL_BUILD
+/*
+ * Dump some core clockes.
+ */
+int do_mx8ulp_showclocks(struct cmd_tbl *cmdtp, int flag, int argc, char * const argv[])
+{
+	printf("SDHC0 %8d MHz\n", pcc_clock_get_rate(4, SDHC0_PCC4_SLOT) / 1000000);
+	printf("SDHC1 %8d MHz\n", pcc_clock_get_rate(4, SDHC1_PCC4_SLOT) / 1000000);
+	printf("SDHC2 %8d MHz\n", pcc_clock_get_rate(4, SDHC2_PCC4_SLOT) / 1000000);
+
+	printf("SOSC %8d MHz\n", cgc1_clk_get_rate(SOSC) / 1000000);
+	printf("FRO %8d MHz\n", cgc1_clk_get_rate(FRO) / 1000000);
+	printf("PLL2 %8d MHz\n", cgc1_clk_get_rate(PLL2) / 1000000);
+	printf("PLL3 %8d MHz\n", cgc1_clk_get_rate(PLL3) / 1000000);
+	printf("PLL3_VCODIV %8d MHz\n", cgc1_clk_get_rate(PLL3_VCODIV) / 1000000);
+	printf("PLL3_PFD0 %8d MHz\n", cgc1_clk_get_rate(PLL3_PFD0) / 1000000);
+	printf("PLL3_PFD1 %8d MHz\n", cgc1_clk_get_rate(PLL3_PFD1) / 1000000);
+	printf("PLL3_PFD2 %8d MHz\n", cgc1_clk_get_rate(PLL3_PFD2) / 1000000);
+	printf("PLL3_PFD3 %8d MHz\n", cgc1_clk_get_rate(PLL3_PFD3) / 1000000);
+
+	return 0;
 }
+
+U_BOOT_CMD(
+	clocks,	CONFIG_SYS_MAXARGS, 1, do_mx8ulp_showclocks,
+	"display clocks",
+	""
+);
+#endif
diff --git a/arch/arm/mach-imx/imx8ulp/pcc.c b/arch/arm/mach-imx/imx8ulp/pcc.c
new file mode 100644
index 0000000000..711b685cd7
--- /dev/null
+++ b/arch/arm/mach-imx/imx8ulp/pcc.c
@@ -0,0 +1,449 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2021 NXP
+ */
+
+#include <common.h>
+#include <div64.h>
+#include <asm/io.h>
+#include <errno.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/pcc.h>
+#include <asm/arch/cgc.h>
+#include <asm/arch/sys_proto.h>
+
+#define cgc1_clk_TYPES 2
+#define cgc1_clk_NUM 8
+
+static enum cgc1_clk pcc3_clksrc[][8] = {
+	{
+	},
+	{	DUMMY0_CLK,
+		LPOSC,
+		SOSC_DIV2,
+		FRO_DIV2,
+		XBAR_BUSCLK,
+		PLL3_PFD1_DIV1,
+		PLL3_PFD0_DIV2,
+		PLL3_PFD0_DIV1
+	}
+};
+
+static enum cgc1_clk pcc4_clksrc[][8] = {
+	{
+		DUMMY0_CLK,
+		SOSC_DIV1,
+		FRO_DIV1,
+		PLL3_PFD3_DIV2,
+		PLL3_PFD3_DIV1,
+		PLL3_PFD2_DIV2,
+		PLL3_PFD2_DIV1,
+		PLL3_PFD1_DIV2
+	},
+	{
+		DUMMY0_CLK,
+		DUMMY1_CLK,
+		LPOSC,
+		SOSC_DIV2,
+		FRO_DIV2,
+		XBAR_BUSCLK,
+		PLL3_VCODIV,
+		PLL3_PFD0_DIV1
+	}
+};
+
+static struct pcc_entry pcc3_arrays[] = {
+	{PCC3_RBASE, DMA1_MP_PCC3_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH0_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH1_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH2_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH3_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH4_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH5_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH6_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH7_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH8_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH9_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH10_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH11_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH12_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH13_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH14_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH15_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH16_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH17_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH18_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH19_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH20_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH21_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH22_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH23_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH24_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH25_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH26_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH27_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH28_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH29_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH30_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, DMA1_CH31_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, MU0_B_PCC3_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, MU3_A_PCC3_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, LLWU1_PCC3_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, UPOWER_PCC3_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, WDOG3_PCC3_SLOT,		CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B},
+	{PCC3_RBASE, WDOG4_PCC3_SLOT,		CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B},
+	{PCC3_RBASE, XRDC_MGR_PCC3_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, SEMA42_1_PCC3_SLOT,	CLKSRC_PER_BUS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, ROMCP1_PCC3_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B},
+	{PCC3_RBASE, LPIT1_PCC3_SLOT,		CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B},
+	{PCC3_RBASE, TPM4_PCC3_SLOT,		CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B},
+	{PCC3_RBASE, TPM5_PCC3_SLOT,		CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B},
+	{PCC3_RBASE, FLEXIO1_PCC3_SLOT,		CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B},
+	{PCC3_RBASE, I3C2_PCC3_SLOT,		CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B},
+	{PCC3_RBASE, LPI2C4_PCC3_SLOT,		CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B},
+	{PCC3_RBASE, LPI2C5_PCC3_SLOT,		CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B},
+	{PCC3_RBASE, LPUART4_PCC3_SLOT,		CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B},
+	{PCC3_RBASE, LPUART5_PCC3_SLOT,		CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B},
+	{PCC3_RBASE, LPSPI4_PCC3_SLOT,		CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B},
+	{PCC3_RBASE, LPSPI5_PCC3_SLOT,		CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B},
+	{}
+};
+
+static struct pcc_entry pcc4_arrays[] = {
+	{PCC4_RBASE, FLEXSPI2_PCC4_SLOT,	CLKSRC_PER_PLAT, PCC_HAS_DIV, PCC_HAS_RST_B },
+	{PCC4_RBASE, TPM6_PCC4_SLOT,		CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B },
+	{PCC4_RBASE, TPM7_PCC4_SLOT,		CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B },
+	{PCC4_RBASE, LPI2C6_PCC4_SLOT,		CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B },
+	{PCC4_RBASE, LPI2C7_PCC4_SLOT,		CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B },
+	{PCC4_RBASE, LPUART6_PCC4_SLOT,		CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B },
+	{PCC4_RBASE, LPUART7_PCC4_SLOT,		CLKSRC_PER_BUS, PCC_HAS_DIV, PCC_HAS_RST_B },
+	{PCC4_RBASE, SAI4_PCC4_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV, PCC_HAS_RST_B },
+	{PCC4_RBASE, SAI5_PCC4_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV, PCC_HAS_RST_B },
+	{PCC4_RBASE, PCTLE_PCC4_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B },
+	{PCC4_RBASE, PCTLF_PCC4_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B },
+	{PCC4_RBASE, SDHC0_PCC4_SLOT,		CLKSRC_PER_PLAT, PCC_HAS_DIV, PCC_HAS_RST_B },
+	{PCC4_RBASE, SDHC1_PCC4_SLOT,		CLKSRC_PER_PLAT, PCC_HAS_DIV, PCC_HAS_RST_B },
+	{PCC4_RBASE, SDHC2_PCC4_SLOT,		CLKSRC_PER_PLAT, PCC_HAS_DIV, PCC_HAS_RST_B },
+	{PCC4_RBASE, USB0_PCC4_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV, PCC_HAS_RST_B },
+	{PCC4_RBASE, USBPHY_PCC4_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV, PCC_HAS_RST_B },
+	{PCC4_RBASE, USB1_PCC4_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV, PCC_HAS_RST_B },
+	{PCC4_RBASE, USB1PHY_PCC4_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV, PCC_HAS_RST_B },
+	{PCC4_RBASE, USB_XBAR_PCC4_SLOT,	CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B },
+	{PCC4_RBASE, ENET_PCC4_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV, PCC_HAS_RST_B },
+	{PCC4_RBASE, SFA1_PCC4_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B },
+	{PCC4_RBASE, RGPIOE_PCC4_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B },
+	{PCC4_RBASE, RGPIOF_PCC4_SLOT,		CLKSRC_NO_PCS, PCC_NO_DIV, PCC_NO_RST_B },
+	{}
+};
+
+static int find_pcc_entry(int pcc_controller, int pcc_clk_slot, struct pcc_entry **out)
+{
+	struct pcc_entry *pcc_array;
+	int index = 0;
+
+	switch (pcc_controller) {
+	case 3:
+		pcc_array = pcc3_arrays;
+		*out = &pcc3_arrays[0];
+		break;
+	case 4:
+		pcc_array = pcc4_arrays;
+		*out = &pcc4_arrays[0];
+		break;
+	default:
+		printf("Not supported pcc_controller: %d\n", pcc_controller);
+		return -EINVAL;
+	}
+
+	while (pcc_array->pcc_base) {
+		if (pcc_array->pcc_slot == pcc_clk_slot)
+			return index;
+
+		pcc_array++;
+		index++;
+	}
+
+	return -ENOENT;
+}
+
+int pcc_clock_enable(int pcc_controller, int pcc_clk_slot, bool enable)
+{
+	u32 val;
+	void __iomem *reg;
+	int clk;
+	struct pcc_entry *pcc_array;
+
+	clk = find_pcc_entry(pcc_controller, pcc_clk_slot, &pcc_array);
+	if (clk < 0)
+		return -EINVAL;
+
+	reg = (void __iomem *)(uintptr_t)(pcc_array[clk].pcc_base + pcc_array[clk].pcc_slot * 4);
+
+	val = readl(reg);
+
+	debug("%s: clk %d, reg 0x%p, val 0x%x, enable %d\n", __func__, clk, reg, val, enable);
+
+	if (!(val & PCC_PR_MASK) || (val & PCC_INUSE_MASK))
+		return -EPERM;
+
+	if (enable)
+		val |= PCC_CGC_MASK;
+	else
+		val &= ~PCC_CGC_MASK;
+
+	writel(val, reg);
+
+	debug("%s: val 0x%x\n", __func__, val);
+
+	return 0;
+}
+
+/* The clock source select needs clock is disabled */
+int pcc_clock_sel(int pcc_controller, int pcc_clk_slot, enum cgc1_clk src)
+{
+	u32 val, i, clksrc_type;
+	void __iomem *reg;
+	struct pcc_entry *pcc_array;
+	enum cgc1_clk *cgc1_clk_array;
+	int clk;
+
+	clk = find_pcc_entry(pcc_controller, pcc_clk_slot, &pcc_array);
+	if (clk < 0)
+		return -EINVAL;
+
+	reg = (void __iomem *)(uintptr_t)(pcc_array[clk].pcc_base + pcc_array[clk].pcc_slot * 4);
+
+	clksrc_type = pcc_array[clk].clksrc;
+	if (clksrc_type >= CLKSRC_NO_PCS) {
+		printf("No PCS field for the PCC %d, clksrc type %d\n",
+		       clk, clksrc_type);
+		return -EPERM;
+	}
+
+	if (pcc_controller == 3)
+		cgc1_clk_array = pcc3_clksrc[clksrc_type];
+	else
+		cgc1_clk_array = pcc4_clksrc[clksrc_type];
+
+	for (i = 0; i < cgc1_clk_NUM; i++) {
+		if (cgc1_clk_array[i] == src) {
+			/* Find the clock src, then set it to PCS */
+			break;
+		}
+	}
+
+	if (i == cgc1_clk_NUM) {
+		printf("No parent in PCS of PCC %d, invalid scg_clk %d\n", clk, src);
+		return -EINVAL;
+	}
+
+	val = readl(reg);
+
+	debug("%s: clk %d, reg 0x%p, val 0x%x, clksrc_type %d\n",
+	      __func__, clk, reg, val, clksrc_type);
+
+	if (!(val & PCC_PR_MASK) || (val & PCC_INUSE_MASK) ||
+	    (val & PCC_CGC_MASK)) {
+		printf("Not permit to select clock source val = 0x%x\n", val);
+		return -EPERM;
+	}
+
+	val &= ~PCC_PCS_MASK;
+	val |= i << PCC_PCS_OFFSET;
+
+	writel(val, reg);
+
+	debug("%s: val 0x%x\n", __func__, val);
+
+	return 0;
+}
+
+int pcc_clock_div_config(int pcc_controller, int pcc_clk_slot, bool frac, u8 div)
+{
+	u32 val;
+	void __iomem *reg;
+	struct pcc_entry *pcc_array;
+	int clk;
+
+	clk = find_pcc_entry(pcc_controller, pcc_clk_slot, &pcc_array);
+	if (clk < 0)
+		return -EINVAL;
+
+	reg = (void __iomem *)(uintptr_t)(pcc_array[clk].pcc_base + pcc_array[clk].pcc_slot * 4);
+
+	if (div > 8 || (div == 1 && frac != 0))
+		return -EINVAL;
+
+	if (pcc_array[clk].div >= PCC_NO_DIV) {
+		printf("No DIV/FRAC field for the PCC %d\n", clk);
+		return -EPERM;
+	}
+
+	val = readl(reg);
+
+	if (!(val & PCC_PR_MASK) || (val & PCC_INUSE_MASK) ||
+	    (val & PCC_CGC_MASK)) {
+		printf("Not permit to set div/frac val = 0x%x\n", val);
+		return -EPERM;
+	}
+
+	if (frac)
+		val |= PCC_FRAC_MASK;
+	else
+		val &= ~PCC_FRAC_MASK;
+
+	val &= ~PCC_PCD_MASK;
+	val |= (div - 1) & PCC_PCD_MASK;
+
+	writel(val, reg);
+
+	return 0;
+}
+
+bool pcc_clock_is_enable(int pcc_controller, int pcc_clk_slot)
+{
+	u32 val;
+	void __iomem *reg;
+	struct pcc_entry *pcc_array;
+	int clk;
+
+	clk = find_pcc_entry(pcc_controller, pcc_clk_slot, &pcc_array);
+	if (clk < 0)
+		return -EINVAL;
+
+	reg = (void __iomem *)(uintptr_t)(pcc_array[clk].pcc_base + pcc_array[clk].pcc_slot * 4);
+	val = readl(reg);
+
+	if ((val & PCC_INUSE_MASK) || (val & PCC_CGC_MASK))
+		return true;
+
+	return false;
+}
+
+int pcc_clock_get_clksrc(int pcc_controller, int pcc_clk_slot, enum cgc1_clk *src)
+{
+	u32 val, clksrc_type;
+	void __iomem *reg;
+	struct pcc_entry *pcc_array;
+	int clk;
+	enum cgc1_clk *cgc1_clk_array;
+
+	clk = find_pcc_entry(pcc_controller, pcc_clk_slot, &pcc_array);
+	if (clk < 0)
+		return -EINVAL;
+
+	clksrc_type = pcc_array[clk].clksrc;
+	if (clksrc_type >= CLKSRC_NO_PCS) {
+		printf("No PCS field for the PCC %d, clksrc type %d\n",
+		       pcc_clk_slot, clksrc_type);
+		return -EPERM;
+	}
+
+	reg = (void __iomem *)(uintptr_t)(pcc_array[clk].pcc_base + pcc_array[clk].pcc_slot * 4);
+
+	val = readl(reg);
+
+	debug("%s: clk %d, reg 0x%p, val 0x%x, type %d\n",
+	      __func__, pcc_clk_slot, reg, val, clksrc_type);
+
+	if (!(val & PCC_PR_MASK)) {
+		printf("This pcc slot is not present = 0x%x\n", val);
+		return -EPERM;
+	}
+
+	val &= PCC_PCS_MASK;
+	val = (val >> PCC_PCS_OFFSET);
+
+	if (!val) {
+		printf("Clock source is off\n");
+		return -EIO;
+	}
+
+	if (pcc_controller == 3)
+		cgc1_clk_array = pcc3_clksrc[clksrc_type];
+	else
+		cgc1_clk_array = pcc4_clksrc[clksrc_type];
+
+	*src = cgc1_clk_array[val];
+
+	debug("%s: parent cgc1 clk %d\n", __func__, *src);
+
+	return 0;
+}
+
+int pcc_reset_peripheral(int pcc_controller, int pcc_clk_slot, bool reset)
+{
+	u32 val;
+	void __iomem *reg;
+	struct pcc_entry *pcc_array;
+	int clk;
+
+	clk = find_pcc_entry(pcc_controller, pcc_clk_slot, &pcc_array);
+	if (clk < 0)
+		return -EINVAL;
+
+	if (pcc_array[clk].rst_b == PCC_NO_RST_B)
+		return 0;
+
+	reg = (void __iomem *)(uintptr_t)(pcc_array[clk].pcc_base + pcc_array[clk].pcc_slot * 4);
+
+	val = readl(reg);
+
+	debug("%s: clk %d, reg 0x%p, val 0x%x\n", __func__, pcc_clk_slot, reg, val);
+
+	if (!(val & PCC_PR_MASK)) {
+		printf("This pcc slot is not present = 0x%x\n", val);
+		return -EPERM;
+	}
+
+	if (reset)
+		val &= ~BIT(28);
+	else
+		val |= BIT(28);
+
+	writel(val, reg);
+
+	debug("%s: clk %d, reg 0x%p, val 0x%x\n", __func__, pcc_clk_slot, reg, val);
+
+	return 0;
+}
+
+u32 pcc_clock_get_rate(int pcc_controller, int pcc_clk_slot)
+{
+	u32 val, rate, frac, div;
+	void __iomem *reg;
+	enum cgc1_clk parent;
+	int ret;
+	int clk;
+	struct pcc_entry *pcc_array;
+
+	clk = find_pcc_entry(pcc_controller, pcc_clk_slot, &pcc_array);
+	if (clk < 0)
+		return -EINVAL;
+
+	ret = pcc_clock_get_clksrc(pcc_controller, pcc_clk_slot, &parent);
+	if (ret)
+		return 0;
+
+	rate = cgc1_clk_get_rate(parent);
+
+	debug("%s: parent rate %u\n", __func__, rate);
+
+	if (pcc_array[clk].div == PCC_HAS_DIV) {
+		reg = (void __iomem *)(uintptr_t)(pcc_array[clk].pcc_base +
+						  pcc_array[clk].pcc_slot * 4);
+		val = readl(reg);
+
+		frac = (val & PCC_FRAC_MASK) >> PCC_FRAC_OFFSET;
+		div = (val & PCC_PCD_MASK) >> PCC_PCD_OFFSET;
+
+		/*
+		 * Theoretically don't have overflow in the calc,
+		 * the rate won't exceed 2G
+		 */
+		rate = rate * (frac + 1) / (div + 1);
+	}
+
+	debug("%s: rate %u\n", __func__, rate);
+	return rate;
+}
diff --git a/arch/arm/mach-imx/imx8ulp/soc.c b/arch/arm/mach-imx/imx8ulp/soc.c
index 3029589d5f..6f4b506386 100644
--- a/arch/arm/mach-imx/imx8ulp/soc.c
+++ b/arch/arm/mach-imx/imx8ulp/soc.c
@@ -287,5 +287,8 @@  void get_board_serial(struct tag_serialnr *serialnr)
 
 int arch_cpu_init(void)
 {
+	if (IS_ENABLED(CONFIG_SPL_BUILD))
+		clock_init();
+
 	return 0;
 }