diff mbox series

[V3,11/13] HV/IOMMU: Enable swiotlb bounce buffer for Isolation VM

Message ID 20210809175620.720923-12-ltykernel@gmail.com
State New
Headers show
Series x86/Hyper-V: Add Hyper-V Isolation VM support | expand

Commit Message

Tianyu Lan Aug. 9, 2021, 5:56 p.m. UTC
From: Tianyu Lan <Tianyu.Lan@microsoft.com>

Hyper-V Isolation VM requires bounce buffer support to copy
data from/to encrypted memory and so enable swiotlb force
mode to use swiotlb bounce buffer for DMA transaction.

In Isolation VM with AMD SEV, the bounce buffer needs to be
accessed via extra address space which is above shared_gpa_boundary
(E.G 39 bit address line) reported by Hyper-V CPUID ISOLATION_CONFIG.
The access physical address will be original physical address +
shared_gpa_boundary. The shared_gpa_boundary in the AMD SEV SNP
spec is called virtual top of memory(vTOM). Memory addresses below
vTOM are automatically treated as private while memory above
vTOM is treated as shared.

Swiotlb bounce buffer code calls dma_map_decrypted()
to mark bounce buffer visible to host and map it in extra
address space. Populate dma memory decrypted ops with hv
map/unmap function.

Hyper-V initalizes swiotlb bounce buffer and default swiotlb
needs to be disabled. pci_swiotlb_detect_override() and
pci_swiotlb_detect_4gb() enable the default one. To override
the setting, hyperv_swiotlb_detect() needs to run before
these detect functions which depends on the pci_xen_swiotlb_
init(). Make pci_xen_swiotlb_init() depends on the hyperv_swiotlb
_detect() to keep the order.

The map function vmap_pfn() can't work in the early place
hyperv_iommu_swiotlb_init() and so initialize swiotlb bounce
buffer in the hyperv_iommu_swiotlb_later_init().

Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
---
 arch/x86/hyperv/ivm.c           | 28 ++++++++++++++
 arch/x86/include/asm/mshyperv.h |  2 +
 arch/x86/xen/pci-swiotlb-xen.c  |  3 +-
 drivers/hv/vmbus_drv.c          |  3 ++
 drivers/iommu/hyperv-iommu.c    | 65 +++++++++++++++++++++++++++++++++
 include/linux/hyperv.h          |  1 +
 6 files changed, 101 insertions(+), 1 deletion(-)

Comments

Michael Kelley Aug. 19, 2021, 6:11 p.m. UTC | #1
From: Tianyu Lan <ltykernel@gmail.com> Sent: Monday, August 9, 2021 10:56 AM
> 
> Hyper-V Isolation VM requires bounce buffer support to copy
> data from/to encrypted memory and so enable swiotlb force
> mode to use swiotlb bounce buffer for DMA transaction.
> 
> In Isolation VM with AMD SEV, the bounce buffer needs to be
> accessed via extra address space which is above shared_gpa_boundary
> (E.G 39 bit address line) reported by Hyper-V CPUID ISOLATION_CONFIG.
> The access physical address will be original physical address +
> shared_gpa_boundary. The shared_gpa_boundary in the AMD SEV SNP
> spec is called virtual top of memory(vTOM). Memory addresses below
> vTOM are automatically treated as private while memory above
> vTOM is treated as shared.
> 
> Swiotlb bounce buffer code calls dma_map_decrypted()
> to mark bounce buffer visible to host and map it in extra
> address space. Populate dma memory decrypted ops with hv
> map/unmap function.
> 
> Hyper-V initalizes swiotlb bounce buffer and default swiotlb
> needs to be disabled. pci_swiotlb_detect_override() and
> pci_swiotlb_detect_4gb() enable the default one. To override
> the setting, hyperv_swiotlb_detect() needs to run before
> these detect functions which depends on the pci_xen_swiotlb_
> init(). Make pci_xen_swiotlb_init() depends on the hyperv_swiotlb
> _detect() to keep the order.
> 
> The map function vmap_pfn() can't work in the early place
> hyperv_iommu_swiotlb_init() and so initialize swiotlb bounce
> buffer in the hyperv_iommu_swiotlb_later_init().
> 
> Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com>
> ---
>  arch/x86/hyperv/ivm.c           | 28 ++++++++++++++
>  arch/x86/include/asm/mshyperv.h |  2 +
>  arch/x86/xen/pci-swiotlb-xen.c  |  3 +-
>  drivers/hv/vmbus_drv.c          |  3 ++
>  drivers/iommu/hyperv-iommu.c    | 65 +++++++++++++++++++++++++++++++++
>  include/linux/hyperv.h          |  1 +
>  6 files changed, 101 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/x86/hyperv/ivm.c b/arch/x86/hyperv/ivm.c
> index c13ec5560d73..0f05e4d6fc62 100644
> --- a/arch/x86/hyperv/ivm.c
> +++ b/arch/x86/hyperv/ivm.c
> @@ -265,3 +265,31 @@ int hv_set_mem_host_visibility(unsigned long addr, int numpages, bool visible)
> 
>  	return __hv_set_mem_host_visibility((void *)addr, numpages, visibility);
>  }
> +
> +/*
> + * hv_map_memory - map memory to extra space in the AMD SEV-SNP Isolation VM.
> + */
> +void *hv_map_memory(void *addr, unsigned long size)
> +{
> +	unsigned long *pfns = kcalloc(size / HV_HYP_PAGE_SIZE,
> +				      sizeof(unsigned long), GFP_KERNEL);
> +	void *vaddr;
> +	int i;
> +
> +	if (!pfns)
> +		return NULL;
> +
> +	for (i = 0; i < size / HV_HYP_PAGE_SIZE; i++)
> +		pfns[i] = virt_to_hvpfn(addr + i * HV_HYP_PAGE_SIZE) +
> +			(ms_hyperv.shared_gpa_boundary >> HV_HYP_PAGE_SHIFT);
> +
> +	vaddr = vmap_pfn(pfns, size / HV_HYP_PAGE_SIZE,	PAGE_KERNEL_IO);
> +	kfree(pfns);
> +
> +	return vaddr;
> +}

This function is manipulating page tables in the guest VM.  It is not involved
in communicating with Hyper-V, or passing PFNs to Hyper-V.  The pfn array
contains guest PFNs, not Hyper-V PFNs.  So it should use PAGE_SIZE
instead of HV_HYP_PAGE_SIZE, and similarly PAGE_SHIFT and virt_to_pfn().
If this code were ever to run on ARM64 in the future with PAGE_SIZE other
than 4 Kbytes, the use of PAGE_SIZE is correct choice.

> +
> +void hv_unmap_memory(void *addr)
> +{
> +	vunmap(addr);
> +}
> diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
> index a30c60f189a3..b247739f57ac 100644
> --- a/arch/x86/include/asm/mshyperv.h
> +++ b/arch/x86/include/asm/mshyperv.h
> @@ -250,6 +250,8 @@ int hv_unmap_ioapic_interrupt(int ioapic_id, struct hv_interrupt_entry *entry);
>  int hv_mark_gpa_visibility(u16 count, const u64 pfn[],
>  			   enum hv_mem_host_visibility visibility);
>  int hv_set_mem_host_visibility(unsigned long addr, int numpages, bool visible);
> +void *hv_map_memory(void *addr, unsigned long size);
> +void hv_unmap_memory(void *addr);
>  void hv_sint_wrmsrl_ghcb(u64 msr, u64 value);
>  void hv_sint_rdmsrl_ghcb(u64 msr, u64 *value);
>  void hv_signal_eom_ghcb(void);
> diff --git a/arch/x86/xen/pci-swiotlb-xen.c b/arch/x86/xen/pci-swiotlb-xen.c
> index 54f9aa7e8457..43bd031aa332 100644
> --- a/arch/x86/xen/pci-swiotlb-xen.c
> +++ b/arch/x86/xen/pci-swiotlb-xen.c
> @@ -4,6 +4,7 @@
> 
>  #include <linux/dma-map-ops.h>
>  #include <linux/pci.h>
> +#include <linux/hyperv.h>
>  #include <xen/swiotlb-xen.h>
> 
>  #include <asm/xen/hypervisor.h>
> @@ -91,6 +92,6 @@ int pci_xen_swiotlb_init_late(void)
>  EXPORT_SYMBOL_GPL(pci_xen_swiotlb_init_late);
> 
>  IOMMU_INIT_FINISH(pci_xen_swiotlb_detect,
> -		  NULL,
> +		  hyperv_swiotlb_detect,
>  		  pci_xen_swiotlb_init,
>  		  NULL);
> diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
> index 57bbbaa4e8f7..f068e22a5636 100644
> --- a/drivers/hv/vmbus_drv.c
> +++ b/drivers/hv/vmbus_drv.c
> @@ -23,6 +23,7 @@
>  #include <linux/cpu.h>
>  #include <linux/sched/task_stack.h>
> 
> +#include <linux/dma-map-ops.h>
>  #include <linux/delay.h>
>  #include <linux/notifier.h>
>  #include <linux/panic_notifier.h>
> @@ -2081,6 +2082,7 @@ struct hv_device *vmbus_device_create(const guid_t *type,
>  	return child_device_obj;
>  }
> 
> +static u64 vmbus_dma_mask = DMA_BIT_MASK(64);
>  /*
>   * vmbus_device_register - Register the child device
>   */
> @@ -2121,6 +2123,7 @@ int vmbus_device_register(struct hv_device *child_device_obj)
>  	}
>  	hv_debug_add_dev_dir(child_device_obj);
> 
> +	child_device_obj->device.dma_mask = &vmbus_dma_mask;
>  	return 0;
> 
>  err_kset_unregister:
> diff --git a/drivers/iommu/hyperv-iommu.c b/drivers/iommu/hyperv-iommu.c
> index e285a220c913..01e874b3b43a 100644
> --- a/drivers/iommu/hyperv-iommu.c
> +++ b/drivers/iommu/hyperv-iommu.c
> @@ -13,14 +13,22 @@
>  #include <linux/irq.h>
>  #include <linux/iommu.h>
>  #include <linux/module.h>
> +#include <linux/hyperv.h>
> +#include <linux/io.h>
> 
>  #include <asm/apic.h>
>  #include <asm/cpu.h>
>  #include <asm/hw_irq.h>
>  #include <asm/io_apic.h>
> +#include <asm/iommu.h>
> +#include <asm/iommu_table.h>
>  #include <asm/irq_remapping.h>
>  #include <asm/hypervisor.h>
>  #include <asm/mshyperv.h>
> +#include <asm/swiotlb.h>
> +#include <linux/dma-map-ops.h>
> +#include <linux/dma-direct.h>
> +#include <linux/set_memory.h>
> 
>  #include "irq_remapping.h"
> 
> @@ -36,6 +44,9 @@
>  static cpumask_t ioapic_max_cpumask = { CPU_BITS_NONE };
>  static struct irq_domain *ioapic_ir_domain;
> 
> +static unsigned long hyperv_io_tlb_size;
> +static void *hyperv_io_tlb_start;
> +
>  static int hyperv_ir_set_affinity(struct irq_data *data,
>  		const struct cpumask *mask, bool force)
>  {
> @@ -337,4 +348,58 @@ static const struct irq_domain_ops hyperv_root_ir_domain_ops = {
>  	.free = hyperv_root_irq_remapping_free,
>  };
> 
> +void __init hyperv_iommu_swiotlb_init(void)
> +{
> +	unsigned long bytes;
> +
> +	/*
> +	 * Allocate Hyper-V swiotlb bounce buffer at early place
> +	 * to reserve large contiguous memory.
> +	 */
> +	hyperv_io_tlb_size = 256 * 1024 * 1024;

A hard coded size here seems problematic.   The memory size of
Isolated VMs can vary by orders of magnitude.  I see that
xen_swiotlb_init() uses swiotlb_size_or_default(), which at least
pays attention to the value specified on the kernel boot line.

Another example is sev_setup_arch(), which in the native case sets
the size to 6% of main memory, with a max of 1 Gbyte.  This is
the case that's closer to Isolated VMs, so doing something
similar could be a good approach.

> +	hyperv_io_tlb_start =
> +			memblock_alloc_low(
> +				  PAGE_ALIGN(hyperv_io_tlb_size),
> +				  HV_HYP_PAGE_SIZE);
> +
> +	if (!hyperv_io_tlb_start) {
> +		pr_warn("Fail to allocate Hyper-V swiotlb buffer.\n");
> +		return;
> +	}
> +}
> +
> +int __init hyperv_swiotlb_detect(void)
> +{
> +	if (hypervisor_is_type(X86_HYPER_MS_HYPERV)
> +	    && hv_is_isolation_supported()) {
> +		/*
> +		 * Enable swiotlb force mode in Isolation VM to
> +		 * use swiotlb bounce buffer for dma transaction.
> +		 */
> +		swiotlb_force = SWIOTLB_FORCE;
> +
> +		dma_memory_generic_decrypted_ops.map = hv_map_memory;
> +		dma_memory_generic_decrypted_ops.unmap = hv_unmap_memory;
> +		return 1;
> +	}
> +
> +	return 0;
> +}
> +
> +void __init hyperv_iommu_swiotlb_later_init(void)
> +{
> +	/*
> +	 * Swiotlb bounce buffer needs to be mapped in extra address
> +	 * space. Map function doesn't work in the early place and so
> +	 * call swiotlb_late_init_with_tbl() here.
> +	 */
> +	if (swiotlb_late_init_with_tbl(hyperv_io_tlb_start,
> +				       hyperv_io_tlb_size >> IO_TLB_SHIFT))
> +		panic("Fail to initialize hyperv swiotlb.\n");
> +}
> +
> +IOMMU_INIT_FINISH(hyperv_swiotlb_detect,
> +		  NULL, hyperv_iommu_swiotlb_init,
> +		  hyperv_iommu_swiotlb_later_init);
> +
>  #endif
> diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
> index 90b542597143..83fa567ad594 100644
> --- a/include/linux/hyperv.h
> +++ b/include/linux/hyperv.h
> @@ -1744,6 +1744,7 @@ int hyperv_write_cfg_blk(struct pci_dev *dev, void *buf, unsigned int len,
>  int hyperv_reg_block_invalidate(struct pci_dev *dev, void *context,
>  				void (*block_invalidate)(void *context,
>  							 u64 block_mask));
> +int __init hyperv_swiotlb_detect(void);
> 
>  struct hyperv_pci_block_ops {
>  	int (*read_block)(struct pci_dev *dev, void *buf, unsigned int buf_len,
> --
> 2.25.1
Christoph Hellwig Aug. 20, 2021, 4:13 a.m. UTC | #2
On Thu, Aug 19, 2021 at 06:11:30PM +0000, Michael Kelley wrote:
> This function is manipulating page tables in the guest VM.  It is not involved
> in communicating with Hyper-V, or passing PFNs to Hyper-V.  The pfn array
> contains guest PFNs, not Hyper-V PFNs.  So it should use PAGE_SIZE
> instead of HV_HYP_PAGE_SIZE, and similarly PAGE_SHIFT and virt_to_pfn().
> If this code were ever to run on ARM64 in the future with PAGE_SIZE other
> than 4 Kbytes, the use of PAGE_SIZE is correct choice.

Yes.  I just stumled over this yesterday.  I think we can actually use a
nicer helper ased around vmap_range() to simplify this exactly because it
always uses the host page size.  I hope I can draft up a RFC today.
Tianyu Lan Aug. 20, 2021, 9:32 a.m. UTC | #3
On 8/20/2021 2:11 AM, Michael Kelley wrote:
>>   }

>> +

>> +/*

>> + * hv_map_memory - map memory to extra space in the AMD SEV-SNP Isolation VM.

>> + */

>> +void *hv_map_memory(void *addr, unsigned long size)

>> +{

>> +	unsigned long *pfns = kcalloc(size / HV_HYP_PAGE_SIZE,

>> +				      sizeof(unsigned long), GFP_KERNEL);

>> +	void *vaddr;

>> +	int i;

>> +

>> +	if (!pfns)

>> +		return NULL;

>> +

>> +	for (i = 0; i < size / HV_HYP_PAGE_SIZE; i++)

>> +		pfns[i] = virt_to_hvpfn(addr + i * HV_HYP_PAGE_SIZE) +

>> +			(ms_hyperv.shared_gpa_boundary >> HV_HYP_PAGE_SHIFT);

>> +

>> +	vaddr = vmap_pfn(pfns, size / HV_HYP_PAGE_SIZE,	PAGE_KERNEL_IO);

>> +	kfree(pfns);

>> +

>> +	return vaddr;

>> +}

> This function is manipulating page tables in the guest VM.  It is not involved

> in communicating with Hyper-V, or passing PFNs to Hyper-V.  The pfn array

> contains guest PFNs, not Hyper-V PFNs.  So it should use PAGE_SIZE

> instead of HV_HYP_PAGE_SIZE, and similarly PAGE_SHIFT and virt_to_pfn().

> If this code were ever to run on ARM64 in the future with PAGE_SIZE other

> than 4 Kbytes, the use of PAGE_SIZE is correct choice.


OK. Will update with PAGE_SIZE.


> 

>> +void __init hyperv_iommu_swiotlb_init(void)

>> +{

>> +	unsigned long bytes;

>> +

>> +	/*

>> +	 * Allocate Hyper-V swiotlb bounce buffer at early place

>> +	 * to reserve large contiguous memory.

>> +	 */

>> +	hyperv_io_tlb_size = 256 * 1024 * 1024;

> A hard coded size here seems problematic.   The memory size of

> Isolated VMs can vary by orders of magnitude.  I see that

> xen_swiotlb_init() uses swiotlb_size_or_default(), which at least

> pays attention to the value specified on the kernel boot line.

> 

> Another example is sev_setup_arch(), which in the native case sets

> the size to 6% of main memory, with a max of 1 Gbyte.  This is

> the case that's closer to Isolated VMs, so doing something

> similar could be a good approach.

> 


Yes, agree. It's better to keep bounce buffer size with AMD SEV.
diff mbox series

Patch

diff --git a/arch/x86/hyperv/ivm.c b/arch/x86/hyperv/ivm.c
index c13ec5560d73..0f05e4d6fc62 100644
--- a/arch/x86/hyperv/ivm.c
+++ b/arch/x86/hyperv/ivm.c
@@ -265,3 +265,31 @@  int hv_set_mem_host_visibility(unsigned long addr, int numpages, bool visible)
 
 	return __hv_set_mem_host_visibility((void *)addr, numpages, visibility);
 }
+
+/*
+ * hv_map_memory - map memory to extra space in the AMD SEV-SNP Isolation VM.
+ */
+void *hv_map_memory(void *addr, unsigned long size)
+{
+	unsigned long *pfns = kcalloc(size / HV_HYP_PAGE_SIZE,
+				      sizeof(unsigned long), GFP_KERNEL);
+	void *vaddr;
+	int i;
+
+	if (!pfns)
+		return NULL;
+
+	for (i = 0; i < size / HV_HYP_PAGE_SIZE; i++)
+		pfns[i] = virt_to_hvpfn(addr + i * HV_HYP_PAGE_SIZE) +
+			(ms_hyperv.shared_gpa_boundary >> HV_HYP_PAGE_SHIFT);
+
+	vaddr = vmap_pfn(pfns, size / HV_HYP_PAGE_SIZE,	PAGE_KERNEL_IO);
+	kfree(pfns);
+
+	return vaddr;
+}
+
+void hv_unmap_memory(void *addr)
+{
+	vunmap(addr);
+}
diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
index a30c60f189a3..b247739f57ac 100644
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@@ -250,6 +250,8 @@  int hv_unmap_ioapic_interrupt(int ioapic_id, struct hv_interrupt_entry *entry);
 int hv_mark_gpa_visibility(u16 count, const u64 pfn[],
 			   enum hv_mem_host_visibility visibility);
 int hv_set_mem_host_visibility(unsigned long addr, int numpages, bool visible);
+void *hv_map_memory(void *addr, unsigned long size);
+void hv_unmap_memory(void *addr);
 void hv_sint_wrmsrl_ghcb(u64 msr, u64 value);
 void hv_sint_rdmsrl_ghcb(u64 msr, u64 *value);
 void hv_signal_eom_ghcb(void);
diff --git a/arch/x86/xen/pci-swiotlb-xen.c b/arch/x86/xen/pci-swiotlb-xen.c
index 54f9aa7e8457..43bd031aa332 100644
--- a/arch/x86/xen/pci-swiotlb-xen.c
+++ b/arch/x86/xen/pci-swiotlb-xen.c
@@ -4,6 +4,7 @@ 
 
 #include <linux/dma-map-ops.h>
 #include <linux/pci.h>
+#include <linux/hyperv.h>
 #include <xen/swiotlb-xen.h>
 
 #include <asm/xen/hypervisor.h>
@@ -91,6 +92,6 @@  int pci_xen_swiotlb_init_late(void)
 EXPORT_SYMBOL_GPL(pci_xen_swiotlb_init_late);
 
 IOMMU_INIT_FINISH(pci_xen_swiotlb_detect,
-		  NULL,
+		  hyperv_swiotlb_detect,
 		  pci_xen_swiotlb_init,
 		  NULL);
diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
index 57bbbaa4e8f7..f068e22a5636 100644
--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@@ -23,6 +23,7 @@ 
 #include <linux/cpu.h>
 #include <linux/sched/task_stack.h>
 
+#include <linux/dma-map-ops.h>
 #include <linux/delay.h>
 #include <linux/notifier.h>
 #include <linux/panic_notifier.h>
@@ -2081,6 +2082,7 @@  struct hv_device *vmbus_device_create(const guid_t *type,
 	return child_device_obj;
 }
 
+static u64 vmbus_dma_mask = DMA_BIT_MASK(64);
 /*
  * vmbus_device_register - Register the child device
  */
@@ -2121,6 +2123,7 @@  int vmbus_device_register(struct hv_device *child_device_obj)
 	}
 	hv_debug_add_dev_dir(child_device_obj);
 
+	child_device_obj->device.dma_mask = &vmbus_dma_mask;
 	return 0;
 
 err_kset_unregister:
diff --git a/drivers/iommu/hyperv-iommu.c b/drivers/iommu/hyperv-iommu.c
index e285a220c913..01e874b3b43a 100644
--- a/drivers/iommu/hyperv-iommu.c
+++ b/drivers/iommu/hyperv-iommu.c
@@ -13,14 +13,22 @@ 
 #include <linux/irq.h>
 #include <linux/iommu.h>
 #include <linux/module.h>
+#include <linux/hyperv.h>
+#include <linux/io.h>
 
 #include <asm/apic.h>
 #include <asm/cpu.h>
 #include <asm/hw_irq.h>
 #include <asm/io_apic.h>
+#include <asm/iommu.h>
+#include <asm/iommu_table.h>
 #include <asm/irq_remapping.h>
 #include <asm/hypervisor.h>
 #include <asm/mshyperv.h>
+#include <asm/swiotlb.h>
+#include <linux/dma-map-ops.h>
+#include <linux/dma-direct.h>
+#include <linux/set_memory.h>
 
 #include "irq_remapping.h"
 
@@ -36,6 +44,9 @@ 
 static cpumask_t ioapic_max_cpumask = { CPU_BITS_NONE };
 static struct irq_domain *ioapic_ir_domain;
 
+static unsigned long hyperv_io_tlb_size;
+static void *hyperv_io_tlb_start;
+
 static int hyperv_ir_set_affinity(struct irq_data *data,
 		const struct cpumask *mask, bool force)
 {
@@ -337,4 +348,58 @@  static const struct irq_domain_ops hyperv_root_ir_domain_ops = {
 	.free = hyperv_root_irq_remapping_free,
 };
 
+void __init hyperv_iommu_swiotlb_init(void)
+{
+	unsigned long bytes;
+
+	/*
+	 * Allocate Hyper-V swiotlb bounce buffer at early place
+	 * to reserve large contiguous memory.
+	 */
+	hyperv_io_tlb_size = 256 * 1024 * 1024;
+	hyperv_io_tlb_start =
+			memblock_alloc_low(
+				  PAGE_ALIGN(hyperv_io_tlb_size),
+				  HV_HYP_PAGE_SIZE);
+
+	if (!hyperv_io_tlb_start) {
+		pr_warn("Fail to allocate Hyper-V swiotlb buffer.\n");
+		return;
+	}
+}
+
+int __init hyperv_swiotlb_detect(void)
+{
+	if (hypervisor_is_type(X86_HYPER_MS_HYPERV)
+	    && hv_is_isolation_supported()) {
+		/*
+		 * Enable swiotlb force mode in Isolation VM to
+		 * use swiotlb bounce buffer for dma transaction.
+		 */
+		swiotlb_force = SWIOTLB_FORCE;
+
+		dma_memory_generic_decrypted_ops.map = hv_map_memory;
+		dma_memory_generic_decrypted_ops.unmap = hv_unmap_memory;
+		return 1;
+	}
+
+	return 0;
+}
+
+void __init hyperv_iommu_swiotlb_later_init(void)
+{
+	/*
+	 * Swiotlb bounce buffer needs to be mapped in extra address
+	 * space. Map function doesn't work in the early place and so
+	 * call swiotlb_late_init_with_tbl() here.
+	 */
+	if (swiotlb_late_init_with_tbl(hyperv_io_tlb_start,
+				       hyperv_io_tlb_size >> IO_TLB_SHIFT))
+		panic("Fail to initialize hyperv swiotlb.\n");
+}
+
+IOMMU_INIT_FINISH(hyperv_swiotlb_detect,
+		  NULL, hyperv_iommu_swiotlb_init,
+		  hyperv_iommu_swiotlb_later_init);
+
 #endif
diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
index 90b542597143..83fa567ad594 100644
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@@ -1744,6 +1744,7 @@  int hyperv_write_cfg_blk(struct pci_dev *dev, void *buf, unsigned int len,
 int hyperv_reg_block_invalidate(struct pci_dev *dev, void *context,
 				void (*block_invalidate)(void *context,
 							 u64 block_mask));
+int __init hyperv_swiotlb_detect(void);
 
 struct hyperv_pci_block_ops {
 	int (*read_block)(struct pci_dev *dev, void *buf, unsigned int buf_len,