diff mbox

[6/7] arm64: dts: qcom: Fix apq8016-sbc board USB related pin definitions

Message ID 1433409546-23995-7-git-send-email-ivan.ivanov@linaro.org
State Accepted
Commit 8883ad80c175dd17aaf007f982e3f8461315eab8
Headers show

Commit Message

Ivan T. Ivanov June 4, 2015, 9:19 a.m. UTC 
USB2513B HUB reset line is connected to PMIC GPIO3 not GPIO1.

Fix TC7USB40MU Dual SPDT Switch select input line control, which is
connected to PMIC GPIO4 not GPIO2 and disable the pin. It is not used
for now.

Remove user LEDs definitions, because they clash with above numbers.

Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
---
 .../arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi | 22 ++++++++--------------
 1 file changed, 8 insertions(+), 14 deletions(-)

--
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
index 37ca2ed..b568c49 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi
@@ -2,26 +2,20 @@ 

 &pm8916_gpios {

-	pm8916_gpios_default: default {
-		usb_hub_reset_pm {
-			pins = "gpio1";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			output-low;
-		};
-		usb_sw_sel_pm {
-			pins = "gpio2";
-			function = PMIC_GPIO_FUNC_NORMAL;
-			input-disable;
-		};
-		usr_led_3_ctrl {
+	usb_hub_reset_pm: usb_hub_reset_pm {
+		pinconf {
 			pins = "gpio3";
 			function = PMIC_GPIO_FUNC_NORMAL;
 			output-low;
 		};
-		usr_led_4_ctrl {
+	};
+
+	usb_sw_sel_pm: usb_sw_sel_pm {
+		pinconf {
 			pins = "gpio4";
 			function = PMIC_GPIO_FUNC_NORMAL;
-			output-low;
+			power-source = <PM8916_GPIO_VPH>;
+			input-disable;
 		};
 	};
 };