diff mbox series

[net,04/10] octeontx2-pf: Don't mask out supported link modes

Message ID 1629633747-22061-5-git-send-email-sgoutham@marvell.com
State New
Headers show
Series Miscellaneous fixes | expand

Commit Message

Sunil Kovvuri Goutham Aug. 22, 2021, 12:02 p.m. UTC 
From: Hariprasad Kelam <hkelam@marvell.com>

Supported link modes are updated by firmware in shared
structure per interface. Kernel uses this value to display
supported link modes via ethtool.

Currently there is extra validation that firmware updated
modes are validated against internal list of supported modes.
As intenal list of supported modes are not updated frequently
new modes supported by firmware are not updated to ethtool.

Hence remove extra validation and report all firmware updated
modes.

Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---
 drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c | 5 -----
 1 file changed, 5 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
index b906a0e..b90decf 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
@@ -33,9 +33,6 @@  struct otx2_stat {
 	.index = offsetof(struct otx2_dev_stats, stat) / sizeof(u64), \
 }
 
-/* Physical link config */
-#define OTX2_ETHTOOL_SUPPORTED_MODES 0x638CCBF //110001110001100110010111111
-
 enum link_mode {
 	OTX2_MODE_SUPPORTED,
 	OTX2_MODE_ADVERTISED
@@ -1116,8 +1113,6 @@  static void otx2_get_link_mode_info(u64 link_mode_bmap,
 	};
 	u8 bit;
 
-	link_mode_bmap = link_mode_bmap & OTX2_ETHTOOL_SUPPORTED_MODES;
-
 	for_each_set_bit(bit, (unsigned long *)&link_mode_bmap, 27) {
 		/* SGMII mode is set */
 		if (bit == 0)