@@ -269,6 +269,7 @@ int otx2_config_pause_frm(struct otx2_nic *pfvf)
int otx2_set_flowkey_cfg(struct otx2_nic *pfvf)
{
struct otx2_rss_info *rss = &pfvf->hw.rss_info;
+ struct nix_rss_flowkey_cfg_rsp *rsp;
struct nix_rss_flowkey_cfg *req;
int err;
@@ -283,6 +284,16 @@ int otx2_set_flowkey_cfg(struct otx2_nic *pfvf)
req->group = DEFAULT_RSS_CONTEXT_GROUP;
err = otx2_sync_mbox_msg(&pfvf->mbox);
+ if (err)
+ goto fail;
+
+ rsp = (struct nix_rss_flowkey_cfg_rsp *)
+ otx2_mbox_get_rsp(&pfvf->mbox.mbox, 0, &req->hdr);
+ if (IS_ERR(rsp))
+ goto fail;
+
+ pfvf->hw.flowkey_alg_idx = rsp->alg_idx;
+fail:
mutex_unlock(&pfvf->mbox.lock);
return err;
}
@@ -196,6 +196,9 @@ struct otx2_hw {
u8 lso_udpv4_idx;
u8 lso_udpv6_idx;
+ /* RSS */
+ u8 flowkey_alg_idx;
+
/* MSI-X */
u8 cint_cnt; /* CQ interrupt count */
u16 npa_msixoff; /* Offset of NPA vectors */
@@ -858,6 +858,7 @@ static int otx2_add_flow_msg(struct otx2_nic *pfvf, struct otx2_flow *flow)
if (flow->flow_spec.flow_type & FLOW_RSS) {
req->op = NIX_RX_ACTIONOP_RSS;
req->index = flow->rss_ctx_id;
+ req->flow_key_alg = pfvf->hw.flowkey_alg_idx;
} else {
req->op = NIX_RX_ACTIONOP_UCAST;
req->index = ethtool_get_flow_spec_ring(ring_cookie);
Otherthan setting action as RSS in NPC MCAM entry, RSS flowkey algorithm index also needs to be set. Otherwise whatever algorithm is defined at flowkey index '0' will be considered by HW and pkt flows will be distributed as such. Fix this by saving the flowkey index sent by admin function while initializing RSS and then use it when framing MCAM rules. Fixes: 81a4362016e7 ("octeontx2-pf: Add RSS multi group support") Signed-off-by: Sunil Goutham <sgoutham@marvell.com> --- drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c | 11 +++++++++++ drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h | 3 +++ drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c | 1 + 3 files changed, 15 insertions(+)