diff mbox series

[net-next,v2] octeontx2-pf: Add vlan-etype to ntuple filters

Message ID 1630071055-6672-1-git-send-email-sbhatta@marvell.com
State New
Headers show
Series [net-next,v2] octeontx2-pf: Add vlan-etype to ntuple filters | expand

Commit Message

Subbaraya Sundeep Aug. 27, 2021, 1:30 p.m. UTC
NPC extraction profile marks layer types
NPC_LT_LB_CTAG for CTAG and NPC_LT_LB_STAG_QINQ for
STAG after parsing input packet. Those layer types
can be used to install ntuple filters using
vlan-etype option. Below are the commands and
corresponding behavior with this patch in place.

> alias nt "ethtool -U eth0 flow-type ether"

> nt vlan 5 m 0xf000 action 0
Input packets with outer VLAN id as 5 i.e,
stag packets with VLAN id 5 and ctag packets with
VLAN id as 5 are hit.

> nt vlan-etype 0x8100 action 0
All input ctag packets with any VLAN id are hit.

> nt vlan-etype 0x88A8 action 0
All input stag packets with any VLAN id are hit.

> nt vlan-etype 0x8100 vlan 5 m 0xf000 action 0
All input ctag packets with VLAN id 5 are hit.

> nt vlan-etype 0x88A8 vlan 5 m 0xf000 action 0
All input stag packets with VLAN id 5 are hit.

Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
---

v2 changes:
  Misc change, converted otx2_prepare_flow_request to static function

 drivers/net/ethernet/marvell/octeontx2/af/npc.h    |  2 ++
 .../net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c | 35 ++++++++++++++++++----
 .../ethernet/marvell/octeontx2/nic/otx2_common.h   |  2 --
 .../ethernet/marvell/octeontx2/nic/otx2_flows.c    | 30 ++++++++++++++++---
 4 files changed, 58 insertions(+), 11 deletions(-)

Comments

patchwork-bot+netdevbpf@kernel.org Aug. 29, 2021, 9:50 a.m. UTC | #1
Hello:

This patch was applied to netdev/net-next.git (refs/heads/master):

On Fri, 27 Aug 2021 19:00:55 +0530 you wrote:
> NPC extraction profile marks layer types

> NPC_LT_LB_CTAG for CTAG and NPC_LT_LB_STAG_QINQ for

> STAG after parsing input packet. Those layer types

> can be used to install ntuple filters using

> vlan-etype option. Below are the commands and

> corresponding behavior with this patch in place.

> 

> [...]


Here is the summary with links:
  - [net-next,v2] octeontx2-pf: Add vlan-etype to ntuple filters
    https://git.kernel.org/netdev/net-next/c/dce677da57c0

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html
diff mbox series

Patch

diff --git a/drivers/net/ethernet/marvell/octeontx2/af/npc.h b/drivers/net/ethernet/marvell/octeontx2/af/npc.h
index 243cf80..b426fd5 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/npc.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/npc.h
@@ -172,6 +172,8 @@  enum key_fields {
 	NPC_DMAC,
 	NPC_SMAC,
 	NPC_ETYPE,
+	NPC_VLAN_ETYPE_CTAG, /* 0x8100 */
+	NPC_VLAN_ETYPE_STAG, /* 0x88A8 */
 	NPC_OUTER_VID,
 	NPC_TOS,
 	NPC_SIP_IPV4,
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c
index 43874d3..e0634ef 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c
@@ -20,6 +20,8 @@  static const char * const npc_flow_names[] = {
 	[NPC_DMAC]	= "dmac",
 	[NPC_SMAC]	= "smac",
 	[NPC_ETYPE]	= "ether type",
+	[NPC_VLAN_ETYPE_CTAG] = "vlan ether type ctag",
+	[NPC_VLAN_ETYPE_STAG] = "vlan ether type stag",
 	[NPC_OUTER_VID]	= "outer vlan id",
 	[NPC_TOS]	= "tos",
 	[NPC_SIP_IPV4]	= "ipv4 source ip",
@@ -492,6 +494,11 @@  static void npc_set_features(struct rvu *rvu, int blkaddr, u8 intf)
 	if (*features & BIT_ULL(NPC_OUTER_VID))
 		if (!npc_check_field(rvu, blkaddr, NPC_LB, intf))
 			*features &= ~BIT_ULL(NPC_OUTER_VID);
+
+	/* for vlan ethertypes corresponding layer type should be in the key */
+	if (npc_check_field(rvu, blkaddr, NPC_LB, intf))
+		*features |= BIT_ULL(NPC_VLAN_ETYPE_CTAG) |
+			     BIT_ULL(NPC_VLAN_ETYPE_STAG);
 }
 
 /* Scan key extraction profile and record how fields of our interest
@@ -747,6 +754,28 @@  static void npc_update_ipv6_flow(struct rvu *rvu, struct mcam_entry *entry,
 	}
 }
 
+static void npc_update_vlan_features(struct rvu *rvu, struct mcam_entry *entry,
+				     u64 features, u8 intf)
+{
+	bool ctag = !!(features & BIT_ULL(NPC_VLAN_ETYPE_CTAG));
+	bool stag = !!(features & BIT_ULL(NPC_VLAN_ETYPE_STAG));
+	bool vid = !!(features & BIT_ULL(NPC_OUTER_VID));
+
+	/* If only VLAN id is given then always match outer VLAN id */
+	if (vid && !ctag && !stag) {
+		npc_update_entry(rvu, NPC_LB, entry,
+				 NPC_LT_LB_STAG_QINQ | NPC_LT_LB_CTAG, 0,
+				 NPC_LT_LB_STAG_QINQ & NPC_LT_LB_CTAG, 0, intf);
+		return;
+	}
+	if (ctag)
+		npc_update_entry(rvu, NPC_LB, entry, NPC_LT_LB_CTAG, 0,
+				 ~0ULL, 0, intf);
+	if (stag)
+		npc_update_entry(rvu, NPC_LB, entry, NPC_LT_LB_STAG_QINQ, 0,
+				 ~0ULL, 0, intf);
+}
+
 static void npc_update_flow(struct rvu *rvu, struct mcam_entry *entry,
 			    u64 features, struct flow_msg *pkt,
 			    struct flow_msg *mask,
@@ -779,11 +808,6 @@  static void npc_update_flow(struct rvu *rvu, struct mcam_entry *entry,
 		npc_update_entry(rvu, NPC_LD, entry, NPC_LT_LD_ICMP6,
 				 0, ~0ULL, 0, intf);
 
-	if (features & BIT_ULL(NPC_OUTER_VID))
-		npc_update_entry(rvu, NPC_LB, entry,
-				 NPC_LT_LB_STAG_QINQ | NPC_LT_LB_CTAG, 0,
-				 NPC_LT_LB_STAG_QINQ & NPC_LT_LB_CTAG, 0, intf);
-
 	/* For AH, LTYPE should be present in entry */
 	if (features & BIT_ULL(NPC_IPPROTO_AH))
 		npc_update_entry(rvu, NPC_LD, entry, NPC_LT_LD_AH,
@@ -829,6 +853,7 @@  do {									      \
 		       ntohs(mask->vlan_tci), 0);
 
 	npc_update_ipv6_flow(rvu, entry, features, pkt, mask, output, intf);
+	npc_update_vlan_features(rvu, entry, features, intf);
 }
 
 static struct rvu_npc_mcam_rule *rvu_mcam_find_rule(struct npc_mcam *mcam,
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
index 96eddd0..521c388 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
@@ -838,8 +838,6 @@  int otx2_get_all_flows(struct otx2_nic *pfvf,
 int otx2_add_flow(struct otx2_nic *pfvf,
 		  struct ethtool_rxnfc *nfc);
 int otx2_remove_flow(struct otx2_nic *pfvf, u32 location);
-int otx2_prepare_flow_request(struct ethtool_rx_flow_spec *fsp,
-			      struct npc_install_flow_req *req);
 int otx2_get_maxflows(struct otx2_flow_config *flow_cfg);
 void otx2_rss_ctx_flow_del(struct otx2_nic *pfvf, int ctx_id);
 int otx2_del_macfilter(struct net_device *netdev, const u8 *mac);
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c
index e949001..0d10efba 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c
@@ -762,7 +762,7 @@  static int otx2_prepare_ipv6_flow(struct ethtool_rx_flow_spec *fsp,
 	return 0;
 }
 
-int otx2_prepare_flow_request(struct ethtool_rx_flow_spec *fsp,
+static int otx2_prepare_flow_request(struct ethtool_rx_flow_spec *fsp,
 			      struct npc_install_flow_req *req)
 {
 	struct ethhdr *eth_mask = &fsp->m_u.ether_spec;
@@ -818,8 +818,30 @@  int otx2_prepare_flow_request(struct ethtool_rx_flow_spec *fsp,
 		return -EOPNOTSUPP;
 	}
 	if (fsp->flow_type & FLOW_EXT) {
-		if (fsp->m_ext.vlan_etype)
-			return -EINVAL;
+		u16 vlan_etype;
+
+		if (fsp->m_ext.vlan_etype) {
+			/* Partial masks not supported */
+			if (be16_to_cpu(fsp->m_ext.vlan_etype) != 0xFFFF)
+				return -EINVAL;
+
+			vlan_etype = be16_to_cpu(fsp->h_ext.vlan_etype);
+			/* Only ETH_P_8021Q and ETH_P_802AD types supported */
+			if (vlan_etype != ETH_P_8021Q &&
+			    vlan_etype != ETH_P_8021AD)
+				return -EINVAL;
+
+			memcpy(&pkt->vlan_etype, &fsp->h_ext.vlan_etype,
+			       sizeof(pkt->vlan_etype));
+			memcpy(&pmask->vlan_etype, &fsp->m_ext.vlan_etype,
+			       sizeof(pmask->vlan_etype));
+
+			if (vlan_etype == ETH_P_8021Q)
+				req->features |= BIT_ULL(NPC_VLAN_ETYPE_CTAG);
+			else
+				req->features |= BIT_ULL(NPC_VLAN_ETYPE_STAG);
+		}
+
 		if (fsp->m_ext.vlan_tci) {
 			memcpy(&pkt->vlan_tci, &fsp->h_ext.vlan_tci,
 			       sizeof(pkt->vlan_tci));
@@ -995,6 +1017,7 @@  int otx2_add_flow(struct otx2_nic *pfvf, struct ethtool_rxnfc *nfc)
 		if (!flow)
 			return -ENOMEM;
 		flow->location = fsp->location;
+		flow->entry = flow_cfg->flow_ent[flow->location];
 		new = true;
 	}
 	/* struct copy */
@@ -1046,7 +1069,6 @@  int otx2_add_flow(struct otx2_nic *pfvf, struct ethtool_rxnfc *nfc)
 				    flow_cfg->max_flows - 1);
 			err = -EINVAL;
 		} else {
-			flow->entry = flow_cfg->flow_ent[flow->location];
 			err = otx2_add_flow_msg(pfvf, flow);
 		}
 	}