new file mode 100644
@@ -0,0 +1,99 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * NXP S32G2 SoC family
+ *
+ * Copyright (c) 2021 SUSE LLC
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "nxp,s32g2";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ enable-method = "psci";
+ next-level-cache = <&cluster0_l2>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x1>;
+ enable-method = "psci";
+ next-level-cache = <&cluster0_l2>;
+ };
+
+ cpu2: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x100>;
+ enable-method = "psci";
+ next-level-cache = <&cluster1_l2>;
+ };
+
+ cpu3: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x101>;
+ enable-method = "psci";
+ next-level-cache = <&cluster1_l2>;
+ };
+
+ cluster0_l2: l2-cache0 {
+ compatible = "cache";
+ };
+
+ cluster1_l2: l2-cache1 {
+ compatible = "cache";
+ };
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ firmware {
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x80000000>;
+
+ gic: interrupt-controller@50800000 {
+ compatible = "arm,gic-v3";
+ reg = <0x50800000 0x10000>,
+ <0x50880000 0x80000>,
+ <0x50400000 0x2000>,
+ <0x50410000 0x2000>,
+ <0x50420000 0x2000>;
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+ };
+};
Add an initial dtsi file for generic SoC features of NXP S32G2. Signed-off-by: Chester Lin <clin@suse.com> --- Changes in v2: - Add a SoC description. - Add an interrupt-affinity to the pmu node. - Move the psci node into the "/firmware" node. - Remove the redundant properties and white lines. - Remove the wrong interrupt specifier from the gic node. - Specify the range and cell-size of /soc [0 - 4 GiB]. - Correct the reserved size of GICR to 512KiB [0x80000]. arch/arm64/boot/dts/freescale/s32g2.dtsi | 99 ++++++++++++++++++++++++ 1 file changed, 99 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/s32g2.dtsi