diff mbox series

[v2,02/33] staging: wfx: do not send CAB while scanning

Message ID 20210913083045.1881321-3-Jerome.Pouiller@silabs.com
State Superseded
Headers show
Series staging/wfx: usual maintenance | expand

Commit Message

Jérôme Pouiller Sept. 13, 2021, 8:30 a.m. UTC
From: Jérôme Pouiller <jerome.pouiller@silabs.com>

During the scan requests, the Tx traffic is suspended. This lock is
shared by all the network interfaces. So, a scan request on one
interface will block the traffic on a second interface. This causes
trouble when the queued traffic contains CAB (Content After DTIM Beacon)
since this traffic cannot be delayed.

It could be possible to make the lock local to each interface. But It
would only push the problem further. The device won't be able to send
the CAB before the end of the scan.

So, this patch just ignore the DTIM indication when a scan is in
progress. The firmware will send another indication on the next DTIM and
this time the system will be able to send the traffic just behind the
beacon.

The only drawback of this solution is that the stations connected to
the AP will wait for traffic after the DTIM for nothing. But since the
case is really rare it is not a big deal.

Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
---
 drivers/staging/wfx/sta.c | 11 +++++++++++
 1 file changed, 11 insertions(+)
diff mbox series

Patch

diff --git a/drivers/staging/wfx/sta.c b/drivers/staging/wfx/sta.c
index a236e5bb6914..5de9ccf02285 100644
--- a/drivers/staging/wfx/sta.c
+++ b/drivers/staging/wfx/sta.c
@@ -629,8 +629,19 @@  int wfx_set_tim(struct ieee80211_hw *hw, struct ieee80211_sta *sta, bool set)
 
 void wfx_suspend_resume_mc(struct wfx_vif *wvif, enum sta_notify_cmd notify_cmd)
 {
+	struct wfx_vif *wvif_it;
+
 	if (notify_cmd != STA_NOTIFY_AWAKE)
 		return;
+
+	/* Device won't be able to honor CAB if a scan is in progress on any
+	 * interface. Prefer to skip this DTIM and wait for the next one.
+	 */
+	wvif_it = NULL;
+	while ((wvif_it = wvif_iterate(wvif->wdev, wvif_it)) != NULL)
+		if (mutex_is_locked(&wvif_it->scan_lock))
+			return;
+
 	if (!wfx_tx_queues_has_cab(wvif) || wvif->after_dtim_tx_allowed)
 		dev_warn(wvif->wdev->dev, "incorrect sequence (%d CAB in queue)",
 			 wfx_tx_queues_has_cab(wvif));