diff mbox series

[v4] phy: qcom-qmp: add support for display port voltage and pre-emphasis swing

Message ID 1631637901-11603-1-git-send-email-khsieh@codeaurora.org
State New
Headers show
Series [v4] phy: qcom-qmp: add support for display port voltage and pre-emphasis swing | expand

Commit Message

Kuogee Hsieh Sept. 14, 2021, 4:45 p.m. UTC
Both voltage and pre-emphasis swing level are set during link training
negotiation between host and sink. There are totally four tables added.
A voltage swing table for both hbr and hbr1, a voltage table for both
hbr2 and hbr3, a pre-emphasis table for both hbr and hbr1 and a pre-emphasis
table for both hbr2 and hbr3. In addition, write 0x0a to TX_TX_POL_INV is
added to complete the sequence of configure dp phy base on HPG.

Chnages in v2:
-- revise commit test
-- add Fixes tag
-- replaced voltage_swing_cfg with voltage
-- replaced pre_emphasis_cfg with emphasis
-- delete drv_lvl_reg and emp_post_reg parameters from qcom_qmp_v4_phy_configure_dp_swing()
-- delete drv_lvl_reg and emp_post_reg parameters from qcom_qmp_phy_configure_dp_swing()

Changes in V3:
-- add __qcom_qmp_phy_configure_dp_swing() to commit swing/pre-emphasis level

Changes in V4:
-- pass 2D array to __qcom_qmp_phy_configure_dp_swing()

Fixes: aff188feb5e1 ("phy: qcom-qmp: add support for sm8250-usb3-dp phy")
Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp.c | 97 +++++++++++++++++++++++++------------
 1 file changed, 66 insertions(+), 31 deletions(-)

Comments

Stephen Boyd Dec. 2, 2021, 10:51 p.m. UTC | #1
Quoting Stephen Boyd (2021-09-14 12:49:13)
> Quoting Kuogee Hsieh (2021-09-14 09:45:01)
> > Both voltage and pre-emphasis swing level are set during link training
> > negotiation between host and sink. There are totally four tables added.
> > A voltage swing table for both hbr and hbr1, a voltage table for both
> > hbr2 and hbr3, a pre-emphasis table for both hbr and hbr1 and a pre-emphasis
> > table for both hbr2 and hbr3. In addition, write 0x0a to TX_TX_POL_INV is
> > added to complete the sequence of configure dp phy base on HPG.
> >
> > Chnages in v2:
> > -- revise commit test
> > -- add Fixes tag
> > -- replaced voltage_swing_cfg with voltage
> > -- replaced pre_emphasis_cfg with emphasis
> > -- delete drv_lvl_reg and emp_post_reg parameters from qcom_qmp_v4_phy_configure_dp_swing()
> > -- delete drv_lvl_reg and emp_post_reg parameters from qcom_qmp_phy_configure_dp_swing()
> >
> > Changes in V3:
> > -- add __qcom_qmp_phy_configure_dp_swing() to commit swing/pre-emphasis level
> >
> > Changes in V4:
> > -- pass 2D array to __qcom_qmp_phy_configure_dp_swing()
> >
> > Fixes: aff188feb5e1 ("phy: qcom-qmp: add support for sm8250-usb3-dp phy")
> > Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
> > ---
>
> Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Can this patch be picked up?
Bjorn Andersson Dec. 2, 2021, 11:10 p.m. UTC | #2
On Tue 14 Sep 09:45 PDT 2021, Kuogee Hsieh wrote:

$suject says "add support", but afaict the code already configures
voltage and pre-emphasis swing.

If I understand your change you're not adding support for the swing, but
rather you make it possible to have different tables for different
versions of the phy?

> Both voltage and pre-emphasis swing level are set during link training
> negotiation between host and sink. There are totally four tables added.
> A voltage swing table for both hbr and hbr1, a voltage table for both
> hbr2 and hbr3, a pre-emphasis table for both hbr and hbr1 and a pre-emphasis
> table for both hbr2 and hbr3. In addition, write 0x0a to TX_TX_POL_INV is
> added to complete the sequence of configure dp phy base on HPG.
> 
> Chnages in v2:
> -- revise commit test
> -- add Fixes tag
> -- replaced voltage_swing_cfg with voltage
> -- replaced pre_emphasis_cfg with emphasis
> -- delete drv_lvl_reg and emp_post_reg parameters from qcom_qmp_v4_phy_configure_dp_swing()
> -- delete drv_lvl_reg and emp_post_reg parameters from qcom_qmp_phy_configure_dp_swing()
> 
> Changes in V3:
> -- add __qcom_qmp_phy_configure_dp_swing() to commit swing/pre-emphasis level
> 
> Changes in V4:
> -- pass 2D array to __qcom_qmp_phy_configure_dp_swing()

Carrying the change log as part of the commit message is a DRM specific
thing, outside of drivers/gpu this all goes below the '---' below.

> 
> Fixes: aff188feb5e1 ("phy: qcom-qmp: add support for sm8250-usb3-dp phy")

It's not clear to me what issue with aff188feb5e1 this patch fixes. In
what way is aff188feb5e1 broken?

> Signed-off-by: Kuogee Hsieh <khsieh@codeaurora.org>
> ---
>  drivers/phy/qualcomm/phy-qcom-qmp.c | 97 +++++++++++++++++++++++++------------
>  1 file changed, 66 insertions(+), 31 deletions(-)
> 
> diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
> index 31036aa..fb029e4 100644
> --- a/drivers/phy/qualcomm/phy-qcom-qmp.c
> +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
> @@ -3546,12 +3546,17 @@ static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = {
>  	{ 0x1f, 0xff, 0xff, 0xff }
>  };
>  
> -static int qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy,
> -		unsigned int drv_lvl_reg, unsigned int emp_post_reg)
> +static int __qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy,
> +				unsigned int drv_lvl_reg,
> +				unsigned int emp_post_reg,
> +				const u8 voltage_swing_hbr_rbr[4][4],
> +				const u8 pre_emphasis_hbr_rbr[4][4],
> +				const u8 voltage_swing_hbr3_hbr2[4][4],
> +				const u8 pre_emphasis_hbr3_hbr2[4][4])
>  {
>  	const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
>  	unsigned int v_level = 0, p_level = 0;
> -	u8 voltage_swing_cfg, pre_emphasis_cfg;
> +	u8 voltage, emphasis;
>  	int i;
>  
>  	for (i = 0; i < dp_opts->lanes; i++) {
> @@ -3560,26 +3565,25 @@ static int qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy,
>  	}
>  
>  	if (dp_opts->link_rate <= 2700) {
> -		voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
> -		pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
> +		voltage = voltage_swing_hbr_rbr[v_level][p_level];
> +		emphasis = pre_emphasis_hbr_rbr[v_level][p_level];
>  	} else {
> -		voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr3_hbr2[v_level][p_level];
> -		pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr3_hbr2[v_level][p_level];
> +		voltage = voltage_swing_hbr3_hbr2[v_level][p_level];
> +		emphasis = pre_emphasis_hbr3_hbr2[v_level][p_level];
>  	}
>  
>  	/* TODO: Move check to config check */
> -	if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF)
> +	if (voltage == 0xFF && emphasis == 0xFF)
>  		return -EINVAL;
>  
>  	/* Enable MUX to use Cursor values from these registers */
> -	voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
> -	pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
> -
> -	writel(voltage_swing_cfg, qphy->tx + drv_lvl_reg);
> -	writel(pre_emphasis_cfg, qphy->tx + emp_post_reg);
> -	writel(voltage_swing_cfg, qphy->tx2 + drv_lvl_reg);
> -	writel(pre_emphasis_cfg, qphy->tx2 + emp_post_reg);
> +	voltage |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
> +	emphasis |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
>  
> +	writel(voltage, qphy->tx + drv_lvl_reg);
> +	writel(emphasis, qphy->tx + emp_post_reg);
> +	writel(voltage, qphy->tx2 + drv_lvl_reg);
> +	writel(emphasis, qphy->tx2 + emp_post_reg);
>  	return 0;
>  }
>  
> @@ -3588,9 +3592,13 @@ static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy)
>  	const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
>  	u32 bias_en, drvr_en;
>  
> -	if (qcom_qmp_phy_configure_dp_swing(qphy,
> -				QSERDES_V3_TX_TX_DRV_LVL,
> -				QSERDES_V3_TX_TX_EMP_POST1_LVL) < 0)
> +	if (__qcom_qmp_phy_configure_dp_swing(qphy,
> +			QSERDES_V3_TX_TX_DRV_LVL,
> +			QSERDES_V3_TX_TX_EMP_POST1_LVL,
> +			qmp_dp_v3_voltage_swing_hbr_rbr,
> +			qmp_dp_v3_pre_emphasis_hbr_rbr,
> +			qmp_dp_v3_voltage_swing_hbr3_hbr2,
> +			qmp_dp_v3_pre_emphasis_hbr3_hbr2) < 0)
>  		return;
>  
>  	if (dp_opts->lanes == 1) {
> @@ -3728,6 +3736,35 @@ static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy)
>  	return 0;
>  }
>  
> +/* The values in these tables are given without MUX_EN (0x20) bit set */
> +static const u8 qmp_dp_v4_pre_emphasis_hbr3_hbr2[4][4] = {
> +	{ 0x00, 0x0c, 0x15, 0x1b },
> +	{ 0x02, 0x0e, 0x16, 0xff },
> +	{ 0x02, 0x11, 0xff, 0xff },
> +	{ 0x04, 0xff, 0xff, 0xff }
> +};
> +
> +static const u8 qmp_dp_v4_voltage_swing_hbr3_hbr2[4][4] = {
> +	{ 0x02, 0x12, 0x16, 0x1a },
> +	{ 0x09, 0x19, 0x1f, 0xff },
> +	{ 0x10, 0x1f, 0xff, 0xff },
> +	{ 0x1f, 0xff, 0xff, 0xff }
> +};
> +
> +static const u8 qmp_dp_v4_pre_emphasis_hbr_rbr[4][4] = {
> +	{ 0x00, 0x0e, 0x15, 0x1b },
> +	{ 0x00, 0x0e, 0x15, 0xff },
> +	{ 0x00, 0x0e, 0xff, 0xff },
> +	{ 0x04, 0xff, 0xff, 0xff }
> +};
> +
> +static const u8 qmp_dp_v4_voltage_swing_hbr_rbr[4][4] = {
> +	{ 0x08, 0x0f, 0x16, 0x1f },
> +	{ 0x11, 0x1e, 0x1f, 0xff },
> +	{ 0x16, 0x1f, 0xff, 0xff },
> +	{ 0x1f, 0xff, 0xff, 0xff }
> +};
> +
>  static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy)
>  {
>  	writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
> @@ -3757,16 +3794,13 @@ static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy)
>  
>  static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy)
>  {
> -	/* Program default values before writing proper values */
> -	writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
> -	writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
> -
> -	writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> -	writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> -
> -	qcom_qmp_phy_configure_dp_swing(qphy,
> +	__qcom_qmp_phy_configure_dp_swing(qphy,
>  			QSERDES_V4_TX_TX_DRV_LVL,
> -			QSERDES_V4_TX_TX_EMP_POST1_LVL);
> +			QSERDES_V4_TX_TX_EMP_POST1_LVL,
> +			qmp_dp_v4_voltage_swing_hbr_rbr,
> +			qmp_dp_v4_pre_emphasis_hbr_rbr,
> +			qmp_dp_v4_voltage_swing_hbr3_hbr2,
> +			qmp_dp_v4_pre_emphasis_hbr3_hbr2);
>  }
>  
>  static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy)
> @@ -3885,6 +3919,9 @@ static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy)
>  	writel(drvr1_en, qphy->tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN);
>  	writel(bias1_en, qphy->tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
>  
> +	writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV);
> +	writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV);

So specifying TX_POL_INV has do be done before we kick off the
configuration? This sounds like a real bug fix, separate of the swing
settings.

Perhaps I'm misunderstanding something with this change?

Thanks,
Bjorn

> +
>  	writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
>  	udelay(2000);
>  	writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
> @@ -3896,11 +3933,9 @@ static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy)
>  			10000))
>  		return -ETIMEDOUT;
>  
> -	writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV);
> -	writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV);
>  
> -	writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
> -	writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
> +	writel(0x22, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
> +	writel(0x22, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
>  
>  	writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
>  	writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 31036aa..fb029e4 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -3546,12 +3546,17 @@  static const u8 qmp_dp_v3_voltage_swing_hbr_rbr[4][4] = {
 	{ 0x1f, 0xff, 0xff, 0xff }
 };
 
-static int qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy,
-		unsigned int drv_lvl_reg, unsigned int emp_post_reg)
+static int __qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy,
+				unsigned int drv_lvl_reg,
+				unsigned int emp_post_reg,
+				const u8 voltage_swing_hbr_rbr[4][4],
+				const u8 pre_emphasis_hbr_rbr[4][4],
+				const u8 voltage_swing_hbr3_hbr2[4][4],
+				const u8 pre_emphasis_hbr3_hbr2[4][4])
 {
 	const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
 	unsigned int v_level = 0, p_level = 0;
-	u8 voltage_swing_cfg, pre_emphasis_cfg;
+	u8 voltage, emphasis;
 	int i;
 
 	for (i = 0; i < dp_opts->lanes; i++) {
@@ -3560,26 +3565,25 @@  static int qcom_qmp_phy_configure_dp_swing(struct qmp_phy *qphy,
 	}
 
 	if (dp_opts->link_rate <= 2700) {
-		voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr_rbr[v_level][p_level];
-		pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr_rbr[v_level][p_level];
+		voltage = voltage_swing_hbr_rbr[v_level][p_level];
+		emphasis = pre_emphasis_hbr_rbr[v_level][p_level];
 	} else {
-		voltage_swing_cfg = qmp_dp_v3_voltage_swing_hbr3_hbr2[v_level][p_level];
-		pre_emphasis_cfg = qmp_dp_v3_pre_emphasis_hbr3_hbr2[v_level][p_level];
+		voltage = voltage_swing_hbr3_hbr2[v_level][p_level];
+		emphasis = pre_emphasis_hbr3_hbr2[v_level][p_level];
 	}
 
 	/* TODO: Move check to config check */
-	if (voltage_swing_cfg == 0xFF && pre_emphasis_cfg == 0xFF)
+	if (voltage == 0xFF && emphasis == 0xFF)
 		return -EINVAL;
 
 	/* Enable MUX to use Cursor values from these registers */
-	voltage_swing_cfg |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
-	pre_emphasis_cfg |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
-
-	writel(voltage_swing_cfg, qphy->tx + drv_lvl_reg);
-	writel(pre_emphasis_cfg, qphy->tx + emp_post_reg);
-	writel(voltage_swing_cfg, qphy->tx2 + drv_lvl_reg);
-	writel(pre_emphasis_cfg, qphy->tx2 + emp_post_reg);
+	voltage |= DP_PHY_TXn_TX_DRV_LVL_MUX_EN;
+	emphasis |= DP_PHY_TXn_TX_EMP_POST1_LVL_MUX_EN;
 
+	writel(voltage, qphy->tx + drv_lvl_reg);
+	writel(emphasis, qphy->tx + emp_post_reg);
+	writel(voltage, qphy->tx2 + drv_lvl_reg);
+	writel(emphasis, qphy->tx2 + emp_post_reg);
 	return 0;
 }
 
@@ -3588,9 +3592,13 @@  static void qcom_qmp_v3_phy_configure_dp_tx(struct qmp_phy *qphy)
 	const struct phy_configure_opts_dp *dp_opts = &qphy->dp_opts;
 	u32 bias_en, drvr_en;
 
-	if (qcom_qmp_phy_configure_dp_swing(qphy,
-				QSERDES_V3_TX_TX_DRV_LVL,
-				QSERDES_V3_TX_TX_EMP_POST1_LVL) < 0)
+	if (__qcom_qmp_phy_configure_dp_swing(qphy,
+			QSERDES_V3_TX_TX_DRV_LVL,
+			QSERDES_V3_TX_TX_EMP_POST1_LVL,
+			qmp_dp_v3_voltage_swing_hbr_rbr,
+			qmp_dp_v3_pre_emphasis_hbr_rbr,
+			qmp_dp_v3_voltage_swing_hbr3_hbr2,
+			qmp_dp_v3_pre_emphasis_hbr3_hbr2) < 0)
 		return;
 
 	if (dp_opts->lanes == 1) {
@@ -3728,6 +3736,35 @@  static int qcom_qmp_v3_dp_phy_calibrate(struct qmp_phy *qphy)
 	return 0;
 }
 
+/* The values in these tables are given without MUX_EN (0x20) bit set */
+static const u8 qmp_dp_v4_pre_emphasis_hbr3_hbr2[4][4] = {
+	{ 0x00, 0x0c, 0x15, 0x1b },
+	{ 0x02, 0x0e, 0x16, 0xff },
+	{ 0x02, 0x11, 0xff, 0xff },
+	{ 0x04, 0xff, 0xff, 0xff }
+};
+
+static const u8 qmp_dp_v4_voltage_swing_hbr3_hbr2[4][4] = {
+	{ 0x02, 0x12, 0x16, 0x1a },
+	{ 0x09, 0x19, 0x1f, 0xff },
+	{ 0x10, 0x1f, 0xff, 0xff },
+	{ 0x1f, 0xff, 0xff, 0xff }
+};
+
+static const u8 qmp_dp_v4_pre_emphasis_hbr_rbr[4][4] = {
+	{ 0x00, 0x0e, 0x15, 0x1b },
+	{ 0x00, 0x0e, 0x15, 0xff },
+	{ 0x00, 0x0e, 0xff, 0xff },
+	{ 0x04, 0xff, 0xff, 0xff }
+};
+
+static const u8 qmp_dp_v4_voltage_swing_hbr_rbr[4][4] = {
+	{ 0x08, 0x0f, 0x16, 0x1f },
+	{ 0x11, 0x1e, 0x1f, 0xff },
+	{ 0x16, 0x1f, 0xff, 0xff },
+	{ 0x1f, 0xff, 0xff, 0xff }
+};
+
 static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy)
 {
 	writel(DP_PHY_PD_CTL_PWRDN | DP_PHY_PD_CTL_PSR_PWRDN | DP_PHY_PD_CTL_AUX_PWRDN |
@@ -3757,16 +3794,13 @@  static void qcom_qmp_v4_phy_dp_aux_init(struct qmp_phy *qphy)
 
 static void qcom_qmp_v4_phy_configure_dp_tx(struct qmp_phy *qphy)
 {
-	/* Program default values before writing proper values */
-	writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
-	writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
-
-	writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
-	writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);
-
-	qcom_qmp_phy_configure_dp_swing(qphy,
+	__qcom_qmp_phy_configure_dp_swing(qphy,
 			QSERDES_V4_TX_TX_DRV_LVL,
-			QSERDES_V4_TX_TX_EMP_POST1_LVL);
+			QSERDES_V4_TX_TX_EMP_POST1_LVL,
+			qmp_dp_v4_voltage_swing_hbr_rbr,
+			qmp_dp_v4_pre_emphasis_hbr_rbr,
+			qmp_dp_v4_voltage_swing_hbr3_hbr2,
+			qmp_dp_v4_pre_emphasis_hbr3_hbr2);
 }
 
 static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy)
@@ -3885,6 +3919,9 @@  static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy)
 	writel(drvr1_en, qphy->tx2 + QSERDES_V4_TX_HIGHZ_DRVR_EN);
 	writel(bias1_en, qphy->tx2 + QSERDES_V4_TX_TRANSCEIVER_BIAS_EN);
 
+	writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV);
+	writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV);
+
 	writel(0x18, qphy->pcs + QSERDES_DP_PHY_CFG);
 	udelay(2000);
 	writel(0x19, qphy->pcs + QSERDES_DP_PHY_CFG);
@@ -3896,11 +3933,9 @@  static int qcom_qmp_v4_phy_configure_dp_phy(struct qmp_phy *qphy)
 			10000))
 		return -ETIMEDOUT;
 
-	writel(0x0a, qphy->tx + QSERDES_V4_TX_TX_POL_INV);
-	writel(0x0a, qphy->tx2 + QSERDES_V4_TX_TX_POL_INV);
 
-	writel(0x27, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
-	writel(0x27, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
+	writel(0x22, qphy->tx + QSERDES_V4_TX_TX_DRV_LVL);
+	writel(0x22, qphy->tx2 + QSERDES_V4_TX_TX_DRV_LVL);
 
 	writel(0x20, qphy->tx + QSERDES_V4_TX_TX_EMP_POST1_LVL);
 	writel(0x20, qphy->tx2 + QSERDES_V4_TX_TX_EMP_POST1_LVL);