new file mode 100644
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <test_progs.h>
+#include <linux/seg6.h>
+#include "cgroup_helpers.h"
+#include "network_helpers.h"
+
+struct tcp_srh_storage {
+ struct in6_addr inner_segment;
+};
+
+static void send_byte(int fd)
+{
+ char b = 0x55;
+
+ if (CHECK_FAIL(send(fd, &b, sizeof(b), 0) != 1))
+ perror("Failed to send single byte");
+}
+
+static int verify_srh(int map_fd, int server_fd, struct ipv6_sr_hdr *client_srh)
+{
+ int err = 0;
+ struct tcp_srh_storage val;
+
+ if (CHECK_FAIL(bpf_map_lookup_elem(map_fd, &server_fd, &val) < 0)) {
+ perror("Failed to read socket storage");
+ return -1;
+ }
+
+ if (memcmp(&val.inner_segment, &client_srh->segments[1],
+ sizeof(struct in6_addr))) {
+ log_err("The inner segment of the received SRH differs from the sent one");
+ err++;
+ }
+
+ return err;
+}
+
+static int run_test(int cgroup_fd, int listen_fd)
+{
+ struct bpf_prog_load_attr attr = {
+ .prog_type = BPF_PROG_TYPE_SOCK_OPS,
+ .file = "./tcp_ipv6_exthdr_srh.o",
+ .expected_attach_type = BPF_CGROUP_SOCK_OPS,
+ };
+ size_t srh_size = sizeof(struct ipv6_sr_hdr) +
+ 2 * sizeof(struct in6_addr);
+ struct ipv6_sr_hdr *client_srh;
+ struct bpf_object *obj;
+ struct bpf_map *map;
+ struct timeval tv;
+ int client_fd;
+ int server_fd;
+ int prog_fd;
+ int map_fd;
+ char byte;
+ int err;
+
+ err = bpf_prog_load_xattr(&attr, &obj, &prog_fd);
+ if (err) {
+ log_err("Failed to load BPF object");
+ return -1;
+ }
+
+ map = bpf_object__next_map(obj, NULL);
+ map_fd = bpf_map__fd(map);
+
+ err = bpf_prog_attach(prog_fd, cgroup_fd, BPF_CGROUP_SOCK_OPS, 0);
+ if (err) {
+ log_err("Failed to attach BPF program");
+ goto close_bpf_object;
+ }
+
+ client_fd = connect_to_fd(listen_fd, 0);
+ if (client_fd < 0) {
+ err = -1;
+ goto close_bpf_object;
+ }
+
+ server_fd = accept(listen_fd, NULL, 0);
+ if (server_fd < 0) {
+ err = -1;
+ goto close_client_fd;
+ }
+
+ /* Set an SRH with ::1 as an intermediate segment on the client */
+
+ client_srh = calloc(1, srh_size);
+ if (!client_srh) {
+ log_err("Failed to create the SRH to send");
+ goto close_server_fd;
+ }
+ client_srh->type = IPV6_SRCRT_TYPE_4;
+ // We do not count the first 8 bytes (RFC 8200 Section 4.4)
+ client_srh->hdrlen = (2 * sizeof(struct in6_addr)) >> 3;
+ client_srh->segments_left = 1;
+ client_srh->first_segment = 1;
+ // client_srh->segments[0] is set by the kernel
+ memcpy(&client_srh->segments[1], &in6addr_loopback,
+ sizeof(struct in6_addr));
+
+ if (setsockopt(client_fd, SOL_IPV6, IPV6_RTHDR, client_srh,
+ srh_size)) {
+ log_err("Failed to set the SRH on the client");
+ goto free_srh;
+ }
+
+ /* Send traffic with this SRH
+ * and check its parsing on the server side
+ */
+
+ tv.tv_sec = 1;
+ tv.tv_usec = 0;
+ if (setsockopt(server_fd, SOL_SOCKET, SO_RCVTIMEO, (const char *)&tv,
+ sizeof(tv))) {
+ log_err("Failed to set the receive timeout on the server");
+ err = -1;
+ goto free_srh;
+ }
+
+ send_byte(client_fd);
+ if (recv(server_fd, &byte, 1, 0) != 1) {
+ log_err("Failed to get the byte under one second on the server 2");
+ err = -1;
+ goto free_srh;
+ }
+
+ err += verify_srh(map_fd, server_fd, client_srh);
+
+free_srh:
+ free(client_srh);
+close_server_fd:
+ close(server_fd);
+close_client_fd:
+ close(client_fd);
+close_bpf_object:
+ bpf_object__close(obj);
+ return err;
+}
+
+void test_tcp_ipv6_exthdr_srh(void)
+{
+ int server_fd, cgroup_fd;
+
+ cgroup_fd = test__join_cgroup("/tcp_ipv6_exthdr_srh");
+ if (CHECK_FAIL(cgroup_fd < 0))
+ return;
+
+ server_fd = start_server(AF_INET6, SOCK_STREAM, "::1", 0, 0);
+ if (CHECK_FAIL(server_fd < 0))
+ goto close_cgroup_fd;
+
+ if (CHECK_FAIL(system("sysctl net.ipv6.conf.all.seg6_enabled=1")))
+ goto close_server;
+
+ if (CHECK_FAIL(system("sysctl net.ipv6.conf.lo.seg6_enabled=1")))
+ goto reset_sysctl;
+
+ CHECK_FAIL(run_test(cgroup_fd, server_fd));
+
+ if (CHECK_FAIL(system("sysctl net.ipv6.conf.lo.seg6_enabled=0")))
+ log_err("Cannot reset sysctl net.ipv6.conf.lo.seg6_enabled to 0");
+
+reset_sysctl:
+ if (CHECK_FAIL(system("sysctl net.ipv6.conf.all.seg6_enabled=0")))
+ log_err("Cannot reset sysctl net.ipv6.conf.all.seg6_enabled to 0");
+
+close_server:
+ close(server_fd);
+close_cgroup_fd:
+ close(cgroup_fd);
+}
new file mode 100644
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/types.h>
+#include <bpf/bpf_helpers.h>
+#include <linux/in6.h>
+#include <linux/ipv6.h>
+#include <linux/seg6.h>
+#include <linux/bpf.h>
+
+char _license[] SEC("license") = "GPL";
+
+#define NEXTHDR_ROUTING 43
+
+struct tcp_srh_storage {
+ struct in6_addr inner_segment;
+};
+
+struct {
+ __uint(type, BPF_MAP_TYPE_SK_STORAGE);
+ __uint(map_flags, BPF_F_NO_PREALLOC);
+ __type(key, int);
+ __type(value, struct tcp_srh_storage);
+} socket_storage_map SEC(".maps");
+
+/* Check the header received from the active side */
+static int read_incoming_srh(struct bpf_sock_ops *skops,
+ struct tcp_srh_storage *storage)
+{
+ __u32 seg_size = 2 * sizeof(struct in6_addr);
+ struct ipv6_sr_hdr *srh;
+ struct ipv6hdr *ip6;
+ void *seg_list;
+ int ret = 1;
+
+ ip6 = (struct ipv6hdr *)skops->skb_data;
+ if (ip6 + 1 <= skops->skb_data_end && ip6->nexthdr == NEXTHDR_ROUTING) {
+ srh = (struct ipv6_sr_hdr *)(ip6 + 1);
+ if (srh + 1 <= skops->skb_data_end) {
+ if (srh->type != IPV6_SRCRT_TYPE_4)
+ return ret;
+
+ seg_list = (void *)(srh + 1);
+ if (seg_list + seg_size <= skops->skb_data_end) {
+ // This is an SRH with at least 2 segments
+ storage->inner_segment = srh->segments[1];
+ ret = 0;
+ }
+ }
+ }
+
+ return ret;
+}
+
+SEC("sockops")
+int srh_read(struct bpf_sock_ops *skops)
+{
+ struct tcp_srh_storage *storage;
+ int true_val = 1;
+
+ if (!skops->sk)
+ return 1;
+
+ storage = bpf_sk_storage_get(&socket_storage_map, skops->sk, 0,
+ BPF_SK_STORAGE_GET_F_CREATE);
+ if (!storage)
+ return 1;
+
+ switch (skops->op) {
+ case BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB:
+ case BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB:
+ bpf_sock_ops_cb_flags_set(skops, skops->bpf_sock_ops_cb_flags |
+ BPF_SOCK_OPS_PARSE_IPV6_HDR_CB_FLAG);
+ break;
+ case BPF_SOCK_OPS_PARSE_IPV6_HDR_CB:
+ return read_incoming_srh(skops, storage);
+ }
+
+ return 0;
+}
This test creates a client and a server exchanging a single byte with a Segment Routing Header and the eBPF program saves the inner segment in a sk_storage. The test program checks that the segment is correct. Signed-off-by: Mathieu Jadin <mathjadin@gmail.com> --- .../bpf/prog_tests/tcp_ipv6_exthdr_srh.c | 171 ++++++++++++++++++ .../selftests/bpf/progs/tcp_ipv6_exthdr_srh.c | 78 ++++++++ 2 files changed, 249 insertions(+) create mode 100644 tools/testing/selftests/bpf/prog_tests/tcp_ipv6_exthdr_srh.c create mode 100644 tools/testing/selftests/bpf/progs/tcp_ipv6_exthdr_srh.c