diff mbox series

[3/3] firmware: qcom: scm: Add function to set IOMMU pagetable addressing

Message ID 20211208083423.22037-4-marijn.suijten@somainline.org
State New
Headers show
Series [1/3] firmware: qcom: scm: Remove reassignment to desc following initializer | expand

Commit Message

Marijn Suijten Dec. 8, 2021, 8:34 a.m. UTC
From: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>

Add a function to change the IOMMU pagetable addressing to
AArch32 LPAE or AArch64. If doing that, then this must be
done for each IOMMU context (not necessarily at the same time).

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
[Marijn: ported from 5.3 to the unified architecture in 5.11]
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
 drivers/firmware/qcom_scm.c | 16 ++++++++++++++++
 drivers/firmware/qcom_scm.h |  1 +
 include/linux/qcom_scm.h    |  1 +
 3 files changed, 18 insertions(+)
diff mbox series

Patch

diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index d5a9ba15e2ba..6f7096120023 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -1140,6 +1140,22 @@  int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
 }
 EXPORT_SYMBOL(qcom_scm_hdcp_req);
 
+int qcom_scm_iommu_set_pt_format(u32 sec_id, u32 ctx_num, u32 pt_fmt)
+{
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_SMMU_PROGRAM,
+		.cmd = QCOM_SCM_SMMU_PT_FORMAT,
+		.arginfo = QCOM_SCM_ARGS(3),
+		.args[0] = sec_id,
+		.args[1] = ctx_num,
+		.args[2] = pt_fmt, /* 0: LPAE AArch32 - 1: AArch64 */
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+
+	return qcom_scm_call(__scm->dev, &desc, NULL);
+}
+EXPORT_SYMBOL(qcom_scm_iommu_set_pt_format);
+
 int qcom_scm_qsmmu500_wait_safe_toggle(bool en)
 {
 	struct qcom_scm_desc desc = {
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
index bb627941702b..a348f2c214e5 100644
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -120,6 +120,7 @@  extern int scm_legacy_call(struct device *dev, const struct qcom_scm_desc *desc,
 #define QCOM_SCM_LMH_LIMIT_DCVSH		0x10
 
 #define QCOM_SCM_SVC_SMMU_PROGRAM		0x15
+#define QCOM_SCM_SMMU_PT_FORMAT			0x01
 #define QCOM_SCM_SMMU_CONFIG_ERRATA1		0x03
 #define QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL	0x02
 
diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
index 8a065f8660c1..ca4a88d7cbdc 100644
--- a/include/linux/qcom_scm.h
+++ b/include/linux/qcom_scm.h
@@ -108,6 +108,7 @@  extern bool qcom_scm_hdcp_available(void);
 extern int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
 			     u32 *resp);
 
+extern int qcom_scm_iommu_set_pt_format(u32 sec_id, u32 ctx_num, u32 pt_fmt);
 extern int qcom_scm_qsmmu500_wait_safe_toggle(bool en);
 
 extern int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val,