diff mbox series

[v4,2/5] interconnect: icc-rpm: Add QNOC type QoS support

Message ID 20211215002324.1727-3-shawn.guo@linaro.org
State Superseded
Headers show
Series Add QCM2290 interconnect support | expand

Commit Message

Shawn Guo Dec. 15, 2021, 12:23 a.m. UTC
It adds QoS support for QNOC type device which can be found on QCM2290
platform.  The downstream driver[1] includes support for priority,
limiter, regulator and forwarding setup.  As QCM2290 support only
requires priority and forwarding configuration, limiter and regulator
support are omitted for this initial submission.

[1] https://source.codeaurora.org/quic/la/kernel/msm-4.19/tree/drivers/soc/qcom/msm_bus/msm_bus_qnoc_adhoc.c?h=kernel.lnx.4.19.r22-rel

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---
 drivers/interconnect/qcom/icc-rpm.c | 38 ++++++++++++++++++++++++++---
 drivers/interconnect/qcom/icc-rpm.h |  3 +++
 2 files changed, 38 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/interconnect/qcom/icc-rpm.c b/drivers/interconnect/qcom/icc-rpm.c
index 429c377231e6..d8ea9bb479b1 100644
--- a/drivers/interconnect/qcom/icc-rpm.c
+++ b/drivers/interconnect/qcom/icc-rpm.c
@@ -18,6 +18,13 @@ 
 #include "smd-rpm.h"
 #include "icc-rpm.h"
 
+/* QNOC QoS */
+#define QNOC_QOS_MCTL_LOWn_ADDR(n)	(0x8 + (n * 0x1000))
+#define QNOC_QOS_MCTL_DFLT_PRIO_MASK	0x70
+#define QNOC_QOS_MCTL_DFLT_PRIO_SHIFT	4
+#define QNOC_QOS_MCTL_URGFWD_EN_MASK	0x8
+#define QNOC_QOS_MCTL_URGFWD_EN_SHIFT	3
+
 /* BIMC QoS */
 #define M_BKE_REG_BASE(n)		(0x300 + (0x4000 * n))
 #define M_BKE_EN_ADDR(n)		(M_BKE_REG_BASE(n))
@@ -40,6 +47,27 @@ 
 #define NOC_QOS_MODEn_ADDR(n)		(0xc + (n * 0x1000))
 #define NOC_QOS_MODEn_MASK		0x3
 
+static int qcom_icc_set_qnoc_qos(struct icc_node *src, u64 max_bw)
+{
+	struct icc_provider *provider = src->provider;
+	struct qcom_icc_provider *qp = to_qcom_provider(provider);
+	struct qcom_icc_node *qn = src->data;
+	struct qcom_icc_qos *qos = &qn->qos;
+	int rc;
+
+	rc = regmap_update_bits(qp->regmap,
+			qp->qos_offset + QNOC_QOS_MCTL_LOWn_ADDR(qos->qos_port),
+			QNOC_QOS_MCTL_DFLT_PRIO_MASK,
+			qos->areq_prio << QNOC_QOS_MCTL_DFLT_PRIO_SHIFT);
+	if (rc)
+		return rc;
+
+	return regmap_update_bits(qp->regmap,
+			qp->qos_offset + QNOC_QOS_MCTL_LOWn_ADDR(qos->qos_port),
+			QNOC_QOS_MCTL_URGFWD_EN_MASK,
+			!!qos->urg_fwd_en << QNOC_QOS_MCTL_URGFWD_EN_SHIFT);
+}
+
 static int qcom_icc_bimc_set_qos_health(struct qcom_icc_provider *qp,
 					struct qcom_icc_qos *qos,
 					int regnum)
@@ -164,10 +192,14 @@  static int qcom_icc_qos_set(struct icc_node *node, u64 sum_bw)
 
 	dev_dbg(node->provider->dev, "Setting QoS for %s\n", qn->name);
 
-	if (qp->type == QCOM_ICC_BIMC)
+	switch (qp->type) {
+	case QCOM_ICC_BIMC:
 		return qcom_icc_set_bimc_qos(node, sum_bw);
-
-	return qcom_icc_set_noc_qos(node, sum_bw);
+	case QCOM_ICC_QNOC:
+		return qcom_icc_set_qnoc_qos(node, sum_bw);
+	default:
+		return qcom_icc_set_noc_qos(node, sum_bw);
+	}
 }
 
 static int qcom_icc_rpm_set(int mas_rpm_id, int slv_rpm_id, u64 sum_bw)
diff --git a/drivers/interconnect/qcom/icc-rpm.h b/drivers/interconnect/qcom/icc-rpm.h
index 2268777348cb..26dad006034f 100644
--- a/drivers/interconnect/qcom/icc-rpm.h
+++ b/drivers/interconnect/qcom/icc-rpm.h
@@ -15,6 +15,7 @@ 
 enum qcom_icc_type {
 	QCOM_ICC_NOC,
 	QCOM_ICC_BIMC,
+	QCOM_ICC_QNOC,
 };
 
 /**
@@ -43,6 +44,7 @@  struct qcom_icc_provider {
  * @ap_owned: indicates if the node is owned by the AP or by the RPM
  * @qos_mode: default qos mode for this node
  * @qos_port: qos port number for finding qos registers of this node
+ * @urg_fwd_en: enable urgent forwarding
  */
 struct qcom_icc_qos {
 	u32 areq_prio;
@@ -51,6 +53,7 @@  struct qcom_icc_qos {
 	bool ap_owned;
 	int qos_mode;
 	int qos_port;
+	bool urg_fwd_en;
 };
 
 /**